SURFACE MOUNT DISPLAY KPSC03-112 WHITE Features Description !0.3 INCH The source color devices are made with GaN on SiC Light !LOW DIGIT HEIGHT. CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. Emitting Diode. Static electricity and surge damage the LEDS. It is !I.C. COMPATIBLE. recommended to use a wrist band or anti-electrostatic !MECHANICALLY glove when handling the LEDs. !GRAY RUGGED. FACE,WHITE SEGMENT. !PACKAGE : 1100PCS / REEL. All devices, equipment and machinery must be electrically grounded. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches),Tolerance is 0.25(0.01") unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD0154 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: DEC/28/2002 DRAWN: F.Y.YUAN PAGE: 1 OF 4 Selection Guide Par t No . Dic e KPSC03-112 L en s Ty p e WHITE (GaN) WHITE DIFFUSED Iv (u c d ) @ 20 m A D es c r i p t i o n Min . Ty p . 2600 13500 Common Cathode,Rt. Hand Decimal Electrical / Optical Characteristics at T)=25C Sy m b o l Par am et er VF Forward Voltage White IR Reverse Current White Chromaticity Coordinates White X D ev i c e Y C Ty p . Max . Un it s Tes t Co n d it io n s 3.8 4.5 V I F=20mA 10 uA V R = 5V pF VF=0V, f =1MHz 0.33 0.34 Capacitance White 100 Absolute Maximum Ratings at T)=25C P ar am e t e r Wh it e Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0154 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: DEC/28/2002 DRAWN: F.Y.YUAN PAGE: 2 OF 4 White KPSC03-112 KPSC03-112 SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. SPEC NO: DSAD0154 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: DEC/28/2002 DRAWN: F.Y.YUAN PAGE: 3 OF 4 Recommended Soldering Pattern (Units : mm) Tape Specification (Units : mm) SPEC NO: DSAD0154 APPROVED : J. Lu REV NO: V.1 CHECKED :Joe Lee DATE: DEC/28/2002 DRAWN: F.Y.YUAN PAGE: 4 OF 4