EC3101C / EC3201C Ordering number : ENN6963A PNP / NPN Epitaxial Planar Silicon Transistors EC3101C / EC3201C Low-Frequency General-Purpose Amplifier Applications Features * Ultraminiature package facilitates miniaturization in end products. Specifications ( ) : EC3101C Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--)55 Collector-to-Emitter Voltage VCEO (--)50 V Emitter-to-Base Voltage VEBO (--)6 V Collector Current Base Current IC ICP IB Collector Dissipation PC 150 mW Junction Temperature Tj 150 C Storage Temperature Tstg --55 to +150 C Collector Current (Pulse) (--)150 V mA (--)300 mA (--)30 mA Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Conditions Ratings min typ max Unit VCB=(--)35V, IE=0 (--)0.1 A VEB=(--)4V, IC=0 (--)0.1 A Gain-Bandwidth Product hFE fT VCE=(--)6V, IC=(--)1mA 200 600 Cob VCE=(--)6V, IC=(--)10mA VCB=(--)6V, f=1MHz (180)200 Output Capacitance Collector-to-Emitter Saturation Voltage VCE(sat) IC=(--)50mA, IB=(--)5mA (--0.12)0.08 (--)0.4 Base-to-Emitter Saturation Voltage VBE(sat) IC=(--)50mA, IB=(--)5mA (--)0.8 (--)1.0 MHz (2.9)1.7 pF V V Collector-to-Base Breakdown Voltage V(BR)CBO IC=(--)10A, IE=0 (--)55 V Collector-to-Emitter Breakdown Voltage V(BR)CEO V V(BR)EBO IC=(--)1mA, RBE= IE=(--)10A, IC=0 (--)50 Emitter-to-Base Breakdown Voltage (--)6 V Marking EC3101C : G EC3201C : H Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 42004 TS IM TB-00000112 / 92001 TS IM TA-2712 No.6963-1/4 EC3101C / EC3201C Package Dimensions unit : mm 2184A Electrical Connection (Top view) Polarity mark Type No. Bottom View 0.8 0.5 0.05 0.2 0.3 0.2 0.05 1 2 4 3 Marking Collector Emitter Collector 1 2 *Electrodes : on the bottom 1.0 0.6 0.05 Base Top View Polarity mark 4 0.3 3 1 : Base 2 : Emitter 3 : Collector 4 : Collector 0.6 0.05 Collector Base Emitter SANYO : ECSP1008-4 IC -- VCE A --40 50 --200A --30 --150A --100A --20 --50A --10 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V 150A 20 100A 10 50A IB=0 0.2 0.4 --15A --10A IB=0 0 --10 --20 --30 Collector-to-Emitter Voltage, VCE -- V --50 IT03247 1.0 IT03246 IC -- VCE 12 EC3201C PC=150mW 45A 40A 35A 30A 25A 20A 15A 8 4 10A 5A IB=0 0 --40 0.8 Collector-to-Emitter Voltage, VCE -- V --5A 0 0.6 50A --20A --4 250A 200A IT03245 --25A 350A 300A 30 0 Collector Current, IC -- mA Collector Current, IC -- mA --8 A 0 EC3101C PC=150mW A --50 A --45 A 0 --4 5 --3 A --30A 40 --1.0 IC -- VCE --12 400 0 A --5 A 450 EC3201C 50 A 50 --4 A 00 --4 IC -- VCE 50 0A --30 --250A A 00 Collector Current, IC -- mA EC3101C --3 Collector Current, IC -- mA --50 0 10 20 30 40 50 Collector-to-Emitter Voltage, VCE -- V IT03248 No.6963-2/4 EC3101C / EC3201C IC -- VBE --80 --60 --40 --20 120 100 80 60 25C --25C --100 EC3201C VCE=6V 140 Collector Current, IC -- mA --120 Ta=75C 25C --25C Collector Current, IC -- mA --140 IC -- VBE 160 EC3101C VCE= --6V Ta=75 C --160 40 20 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 Base-to-Emitter Voltage, VBE -- V 0 0 --1.4 0.4 0.6 0.8 1.0 1.2 Base-to-Emitter Voltage, VBE -- V hFE -- IC 1000 0.2 IT03249 hFE -- IC 1000 EC3201C EC3101C 7 Ta=75C 5 DC Current Gain, hFE DC Current Gain, hFE 7 25C --25C 3 2 100 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector Current, IC -- mA Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V --0.1 75 Ta= C 5 C 25 -C 25 3 3 --25C 2 2 3 5 7 1.0 2 2 3 5 7 10 2 3 --0.01 5 7 100 2 IT03252 VCE(sat) -- IC 5 2 7 Ta=75C 25C Collector Current, IC -- mA EC3101C IC / IB=10 3 5 100 0.1 5 7 --100 2 IT03251 VCE(sat) -- IC 5 EC3201C IC / IB=10 3 2 0.1 7 C Ta=75 C --25 5 3 2 25C 0.01 --0.001 2 3 5 7 --0.01 2 3 5 7 --0.1 2 IT03253 Collector Current, IC -- A 2 0.001 3 5 7 0.01 2 3 5 7 Collector Current, IC -- A Cob -- VCB 7 EC3201C f=1MHz Output Capacitance, Cob -- pF 5 3 2 2 0.1 IT03254 Cob -- VCB 5 EC3101C f=1MHz Output Capacitance, Cob -- pF 1.4 IT03250 3 2 1.0 7 1.0 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 5 7 --100 IT03255 5 7 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 7 100 IT03256 No.6963-3/4 EC3101C / EC3201C f T -- IC 5 3 2 --100 7 5 3 2 2 3 5 7 --0.01 2 3 5 --0.1 IT03257 s op ms Collector Current, IC -- A 10 0m 10 DC er ati 3 on 2 2 EC3101C / EC3201C Ta=25C Single pulse Mounted on glass epoxy boad. For PNP, the polarity is reversed. 0.001 0.1 2 3 100 7 5 3 2 2 3 5 7 5 7 1.0 2 3 5 2 0.01 3 5 7 0.1 IT03258 PC -- Ta EC3101C / EC3201C 100s IC=0.15A 0.1 7 5 3 2 10s s 1m 2 3 0.20 ICP=0.3A 3 5 Collector Current, IC -- A ASO 5 EC3201C VCE=6V 7 10 0.001 7 Collector Current, IC -- A 0.01 7 5 Gain-Brandwidth Product, f T -- MHz EC3101C VCE= --6V 7 --10 --0.001 f T -- IC 1000 Collector Dissipation, PC -- W Gain-Brandwidth Product, f T -- MHz --1000 0.15 0.10 0.05 0 7 10 2 Collector-to-Emitter Voltage, VCE -- V 3 5 7 IT03259 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT03260 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2004. Specifications and information herein are subject to change without notice. PS No.6963-4/4