VS-200MT40KPbF www.vishay.com Vishay Semiconductors Three Phase Bridge (Power Module), 200 A FEATURES * Package fully compatible with the industry standard INT-A-PAK power modules series * High thermal conductivity package, electrically insulated case * Low power loss * Excellent power volume ratio, outline for easy connections to power transistor and IGBT modules * 4000 VRMS isolating voltage * UL E78996 approved MTK * Designed and qualified for industrial level * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS IO 200 A VRRM 400 V Package MTK Circuit configuration Three phase bridge DESCRIPTION It extends the existing range of MT...KB bridges an extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO IFSM I2t CHARACTERISTICS TC VALUES UNITS 200 A 85 C 50 Hz 1800 60 Hz 1880 50 Hz 16.2 60 Hz 14.7 A kA2s I2t 162 kA2s VRRM 400 V -40 to +150 C VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM MAXIMUM AT TJ = 150 C mA 400 500 6 TStg TJ Range ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-200MT40KPbF Revision: 14-Sep-17 Document Number: 94355 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-200MT40KPbF www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER Maximum RMS output current at case temperature SYMBOL IO TEST CONDITIONS 120 rect. conduction angle t = 10 ms Maximum peak, one-cycle forward. non-repetitive on state surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Value of threshold voltage Slope resistance VF(TO) rt VALUES A 85 C No voltage reapplied 1800 100 % VRRM reapplied 1520 No voltage reapplied 1880 Initial TJ = TJ maximum 100 % VRRM reapplied t = 0.1 ms to 10 ms, no voltage reapplied TJ maximum UNITS 200 A 1590 16.2 14.7 11.6 kA2s 12.6 162 kA2s 0.76 V 2.4 m Maximum forward voltage drop VFM Ipk = 200 A, TJ = 25 C, tp = 400 s single junction 1.40 Isolation voltage VISOL TJ = 25 C all terminal shorted, f = 50 Hz, t = 1 s 4000 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, case to heatsink per module Mounting torque 10 % to heatsink Approximate weight SYMBOL TEST CONDITIONS TJ, TStg RthJC RthCS VALUES UNITS -40 to +150 C DC operation per module 0.12 DC operation per junction 0.69 120 rect. conduction angle per module 0.14 120 rect. conduction angle per junction 0.82 Mounting surface smooth, flat and greased. Heatsink compound thermal conductivity = 0.42 W/mK 0.033 A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow or the spread of the compound. Lubricated threads. K/W 4 to 6 Nm 176 g Revision: 14-Sep-17 Document Number: 94355 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-200MT40KPbF www.vishay.com Vishay Semiconductors Instantaneous On-State Current (A) Maximum Allowable Case Temperature (C) 140 130 120 120 (Rect) 110 100 90 80 70 60 80 100 120 140 160 180 200 1600 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 1400 1200 1000 800 600 Per junction 400 220 1 10 Instantaneous On-State Voltage (V) Fig. 1 - Current Rating Characteristics Fig. 3 - Maximum Non-Repetitve Surge Current 1000 2000 Maximum non-repetitive surge current versus pulse train duration. Control of conduction may not be maintained. Initial TJ = 150 C No voltage reapplied Rated VRRM reapplied Peak Half Sine Wave On-State Current (A) Peak Half Sine Wave On-State Current 1800 100 TJ = 25 C 10 TJ = 150 C 1600 1400 1200 1000 800 600 400 200 1 0.5 Per junction 0 1.0 1.5 2.0 2.5 0.01 3.0 0.1 1.0 10 Number of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 2 - On-State Voltage Drop Characteristics Fig. 4 - Maximum Non-Repetitive Surge Current 500 Maximum Total Power Loss (W) 500 Maximum Total Power Loss (W) 100 Total Output Current (A) 400 120 (Rect) 300 200 100 TJ = 125 C 0 R 0. 05 400 0. 1 th SA K/ W = 0. 02 5 K/ W 0.2 300 200 W K/W 0.3 K/ - R K/W 0.5 K/W 1.0 K 100 /W 0 0 40 80 120 160 Total Output Current (A) 200 0 30 60 90 120 150 Maximum Allowable Ambient Temperature (C) Fig. 5 - Current Rating Nomogram (1 Module Per Heatsink) Revision: 14-Sep-17 Document Number: 94355 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-200MT40KPbF ZthJC - Transient Thermal Impedance (K/W) www.vishay.com Vishay Semiconductors 10 Steady state value RthJC per junction = 0.69 K/W (DC operation) 1 0.1 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 6 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code VS- 20 0 MT 40 1 2 3 4 5 K PbF 6 1 - Vishay Semiconductors product 2 - Current rating code: 20 = 200 A (average) 3 - Three phase diodes bridge 4 5 - Essential part number Voltage code x 10 = VRRM (40 = 400 V) 6 - PbF = Lead (Pb)-free Note * To order the optional hardware go to www.vishay.com/doc?95172 CIRCUIT CONFIGURATION + D A B ~ C - E F LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95004 Revision: 14-Sep-17 Document Number: 94355 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors MTK (with and without optional barrier) DIMENSIONS WITH OPTIONAL BARRIERS in millimeters (inches) Fast-on tab 2.8 x 0.8 (type 110) 8.5 0.5 (0.34 0.02) 30 0.5 (1.17 0.02) 24 0.5 (0.94 0.02) 38 0.5 (1.5 0.02) 25.5 0.5 (1.004 0.02) 28 1 (1.11 0.04) Screws M5 x 0.8 length 10 35 0.3 (1.38 0.01) 75 0.5 (2.95 0.02) A 2 3 4 B C 5 6 7 8 O 6.5 0.2 (O 0.26 0.01) 14 0.3 (0.55 0.01) 1 D 18 0.3 (0.71 0.01) 5 0.3 (0.2 0.01) F E 46 0.3 (1.81 0.01) 80 0.3 (3.15 0.01) 94 0.3 (3.7 0.01) Document Number: 95004 Revision: 27-Aug-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Outline Dimensions MTK (with and without optional barrier) Vishay Semiconductors DIMENSIONS WITHOUT OPTIONAL BARRIERS in millimeters (inches) Fast-on tab 2.8 x 0.8 (type 110) 24 0.5 (0.94 0.02) 8.5 0.5 (0.34 0.02) 30 0.5 (1.17 0.02) 25.5 0.5 (1.004 0.02) 28 1 (1.11 0.04) Screws M5 x 0.8 length 10 35 0.3 (1.38 0.01) 75 0.5 (2.95 0.02) A 2 3 4 B C 5 6 7 8 O 6.5 0.2 (O 0.26 0.01) 14 0.3 (0.55 0.01) 1 D 18 0.3 (0.71 0.01) 5 0.3 (0.2 0.01) F E 46 0.3 (1.81 0.01) 80 0.3 (3.15 0.01) 94 0.3 (3.7 0.01) www.vishay.com 2 For technical questions, contact: indmodules@vishay.com Document Number: 95004 Revision: 27-Aug-07 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-200MT40KPBF