ACDC
Specification
36100 Watts
•CEC2008 & EISA2007 Compliant
•Low Profile
•Single Outputs from 5 V to 48 V
•High Power Density
•Universal Input
•China Compulsory Certification (CCC) Qualified
•3 Year Warranty
AEB Series
Input
Input Voltage • 90-264 VAC
Input Frequency • 47-63 Hz
Input Current • AEB36: 1.00 A max
AEB45: 1.20 A max
AEB70: 1.50 A max
AEB100: 1.85 A max
Inrush Current • AEB36: 60 A max at 240 VAC
AEB45: 70 A max at 240 VAC
AEB70: 80 A max at 240 VAC
AEB100: 120 A max at 240 VAC
Power Factor • EN61000-3-2, class A
Earth Leakage Current • <3.5 mA (AEB45/70/100)
Input Protection • Fitted with an internal fuse
AEB36 T1A/250 VAC,
AEB45/70/100 T2A/250 VAC
No Load Input Power • <0.5 W
Output
Output Voltage • See tables
Initial Set Accuracy • ±2%, set at 60% load
Minimum Load • No minimum load required
Start Up Delay • 3 s max
Start Up Rise Time • 20 ms
Hold Up Time • AEB36/45/70: 8 ms at 115 VAC
AEB100: 20 ms at 115 VAC
Drift • ±0.05%
Line Regulation • ±1%
Load Regulation • See tables
Ripple & Noise • 1% pk-pk max, 20 MHz bandwidth,
(see note 2)
Transient Response • 5% max deviation, recovery to within 1%
in 500 µs for a 25% load change
Overvoltage Protection • Typical 125% max, latching
Overload Protection • Trip & restart mode (hiccup mode)
Short Circuit Protection • Continuous
Temperature • ±0.04%/°C
Coefficient
xppower.com
General
Efficiency • See tables
Energy Efficiency • AEB70: Level V
All other models: Level IV
Isolation • AEB36: 3000 VAC Input to Output
AEB45/70/100: 3000 VAC Input to Output,
1500 VAC Input to Ground. Negative
output is connected to ground. For
optional 500 VAC output to ground
isolation add suffix ‘-F’ to model number
Switching Frequency • AEB36: 60 kHz typical, AEB45: 100 kHz
typical, AEB70: 65 kHz typical,
AEB100: 80 kHz typical PFC converter
45 kHz typical main converter
Power Density • AEB36: 5.34 W/in3, AEB45: 3.81 W/in3,
AEB70: 4.92 W/in3, AEB100: 4.45 W/in3
MTBF • AEB36: >360 kHrs, AEB45: >300 kHrs,
AEB70: >200 kHrs, AEB100: >150 kHrs
to MIL-HDBK-217F at 25 °C, GB
Environmental
Operating Temperature • AEB36/45/70: 0 ˚C to +60 °C derate
linearly from 100% load at +40 °C to 60%,
load at +60 °C, AEB100: 0 °C to +60 °C
derate linearly from 100% load at +40 °C to
50% load at +60 °C
Storage Temperature • -20 °C to +85 °C
Operating Humidity • 93% RH, non-condensing
EMC & Safety
Emissions • EN55022, Level B conducted & radiated
Harmonic Currents • EN61000-3-2 Class A
Voltage Flicker • EN61000-3-3
ESD Immunity • EN61000-4-2 Level 2 (contact) Perf Criteria A
EN61000-4-2 Level 3 (air) Perf Criteria A
Radiated Immunity • EN61000-4-3, 3 V/m Perf Criteria A
EFT/Burst • EN61000-4-4, level 2 Perf Criteria A
Surge • EN61000-4-5, installation class 3,
Perf Criteria B
Conducted Immunity • EN61000-4-6, Level 2 Perf Criteria A
Magnetic Field • EN61000-4-8, 3 A/m Perf Criteria A
Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms,
100% 5000 ms Perf Criteria A, B, B
Safety Approvals • EN60950-1:2006+A11, UL/cUL60950-1,
China Compulsory Certification (CCC)
qualified (AEB36/70 only)
ACDC
AEB36100
Models and Ratings
Output Power Output Voltage Output Current Load Regulation(1) Efficiency(4) Model Number(3)
45 W 12.0 V 3.75 A ±3% 84% AEB45US12
45 W 15.0 V 3.00 A ±3% 85% AEB45US15
45 W 18.0 V 2.50 A ±2% 85% AEB45US18
45 W 19.0 V 2.37 A ±2% 85% AEB45US19
45 W 24.0 V 1.88 A ±2% 86% AEB45US24
48 W 48.0 V 1.00 A ±2% 87% AEB45US48
Notes
1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load).
2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor.
3. For optional 500 VAC output to ground isolation add suffix ‘-F’ to model number.
4. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.
Output Power Output Voltage Output Current Load Regulation(1) Efficiency(4) Model Number(3)
100 W 12.0 V 8.34 A ±4% 85% AEB100PS12
100 W 12.5 V 8.00 A ±4% 85% AEB100PS125
100 W 15.0 V 6.67 A ±4% 85% AEB100PS15
100 W 24.0 V 4.17 A ±2% 85% AEB100PS24
100 W 48.0 V 2.08 A ±2% 85% AEB100PS48
Notes
1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load).
2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor.
3. For optional 500 VAC output to ground isolation add suffix ‘-F’ to model number.
4. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.
AEB36
AEB45
AEB70
AEB100
Output Power Output Voltage Output Current Load Regulation(1) Efficiency(3) Model Number
20 W 5.0 V 4.00 A ±6% 73% AEB36US05
27 W 9.0 V 3.00 A ±5% 77% AEB36US09
30 W 12.0 V 2.50 A ±5% 78% AEB36US12
32 W 13.5 V 2.40 A ±5% 80% AEB36US13
36 W 15.0 V 2.40 A ±3% 80% AEB36US15
36 W 18.0 V 2.00 A ±2% 81% AEB36US18
36 W 24.0 V 1.50 A ±2% 81% AEB36US24
36 W 48.0 V 0.75 A ±2% 83% AEB36US48
Notes
1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load).
2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor.
3. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.
Output Power Output Voltage Output Current Load Regulation(1) Efficiency(5) Model Number(3)
66 W 12.0 V 5.50 A ±5% 82% AEB70US12
69 W 15.0 V 4.60 A ±3% 84% AEB70US15(4)
70 W 18.0 V 3.90 A ±2% 84% AEB70US18(4)
72 W 19.0 V 3.70 A ±2% 84% AEB70US19(4)
72 W 24.0 V 3.00 A ±2% 85% AEB70US24(4)
72 W 48.0 V 1.50 A ±2% 87% AEB70US48(4)
Notes
1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load).
2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor.
3. For optional 500 VAC output to ground isolation add suffix ‘-F’ to model number.
4. Energy efficiency level V.
5. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load.
4.72
(120.0)
2.05
(52.0)
Cable length: 48” ±2”
(1220 mm ±50 mm)
0.47
(12.00)
1.22
(31.0)
IEC320-C14
AEB36/45
Mechanical Details
4.33
(110.0)
Cable length: 48” ±2”
(1220 mm ±50 mm)
0.79
(20.0)
1.97
(50.0)
IEC320-C8
0.47
(12.00)
Notes
AEB36
Notes
Power Cord Order Part:
UK - UK-MAINS-8
European - EU-MAINS-8
US - US-MAINS-8
AEB45
Power Cord Order Part:
UK - UK-MAINS-IEC
European - EU-MAINS-IEC
US - US-MAINS-IEC
1. All dimensions shown in inches (mm).
2. Weight: 0.42 lbs (190 g) approx.
3. Tolerance is ±0.02 (±0.5) maximum, except output cable length.
4. Output connector is 5.5 mm dia. outer barrel, inner dia. is 2.5 mm with a center + and outer shell - polarity.
5. Optional output connectors available, contact sales for details.
6. Length of mains lead: 76 inches (1930 mm) approx
1. All dimensions shown in inches (mm).
2. Weight: 0.62 lbs (280 g) approx.
3. Tolerance is ±0.02 (±0.5) maximum, except output cable length.
4. Output connector is 5.5 mm dia. outer barrel, inner dia. is 2.5 mm with a center + and outer shell - polarity.
5. Optional output connectors available, contact sales for details.
6. Length of mains lead: 76 inches (1930 mm) approx
ACDC
21-Jan-11
AEB70/100
Mechanical Details
5.90
(150.0)
1.38
(35.0)
2.76
(70.0)
IEC320-C14
0.47
(12.00)
Cable length: 48” ±2”
(1220 mm ±50 mm)
5.20
(132.0)
1.20
(30.5)
2.28
(58.0)
IEC320-C14
0.47
(12.00)
Cable length: 48” ±2”
(1220 mm ±50 mm)
5.20
(132.0)
1.20
(30.5)
2.28
(58.0)
IEC320-C14
0.47
(12.00)
Cable length: 48” ±2”
(1220 mm ±50 mm)
Notes
AEB70
1. All dimensions shown in inches (mm).
2. Weight: 0.76 lbs (345 g) approx.
3. Tolerance is ±0.02 (±0.5) maximum, except output cable length.
4. Output connector is 5.5 mm dia. outer barrel, inner dia. is 2.5 mm with a center + and outer shell - polarity.
5. Optional output connectors available, contact sales for details.
6. Length of mains lead: 76 inches (1930 mm) approx
1. All dimensions shown in inches (mm).
2. Weight: 1.36 lbs (600 g) approx.
3. Tolerance is ±0.02 (±0.5) maximum, except output cable length.
4. Output connector is 5.5 mm dia. outer barrel, inner dia. is 2.5 mm with a center + and outer shell - polarity.
5. Optional output connectors available, contact sales for details.
6. Length of mains lead: 76 inches (1930 mm) approx
Notes
Power Cord Order Part:
UK - UK-MAINS-IEC
European - EU-MAINS-IEC
US - US-MAINS-IEC
AEB100
Power Cord Order Part:
UK - UK-MAINS-IEC
European - EU-MAINS-IEC
US - US-MAINS-IEC
ACDC