FP0067255RF9550B8 - Vishay Presicion Group

www.vishay.com Vishay Dale

Revision: 22-Nov-11 1Document Number: 31020

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Metal Film Resistors, Industrial, Flameproof

FEATURES

• Small physical size

• Low cost

• FP resistors have the ability to withstand

overloads up to 100 times rated power

without any trace of flame

• Exceptional frequency characteristics

• Especially suited for circuitry where functions,

environments and duty cycles demand power resistors

• Electroplated tin-lead or lead (Pb)-free solder finish leads

• Tighter tolerances available on request

• Compliant to RoHS Directive 2002/95/EC

Note

*Pb containing terminations are not RoHS compliant, exemptions

may apply

Note

(1) Continuous working voltage shall be or maximum working voltage, whichever is less.

Note

(2) Some packaging codes are model specific.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL

HISTORICAL

MODEL

POWER

RATING

P25 °C

POWER

RATING

P40 °C

POWER

RATING

P70 °C

MAXIMUM

WORKING

VOLTAGE (1)

RESISTANCE

RANGE



TOLERANCE

± %

TEMPERATURE

COEFFICIENT

± ppm/°C

FP01/2 FP1/2 - - 0.5 350 10 to 1M 1, 2, 5, 10 150

FP0001 FP1 - - 1 500 10 to 1M 1, 2, 5, 10 150

FP0032 FP32 - - 1 500 10 to 1M 1, 2, 5, 10 150

FP0002 FP2 3.5 3 2 500 25 to 125K 1, 2, 5, 10 150

FP0042 FP42 - - 2 500 25 to 125K 1, 2, 5, 10 150

FP0003 FP3 4 4 3 500 22 to 125K 1, 2, 5, 10 150

FP0004 FP4 5.5 5 4 500 70 to 125K 1, 2, 5, 10 150

FP0005 FP5 6.5 6 5 600 70 to 125K 1, 2, 5, 10 150

FP0007 FP7 7.5 - 7 700 25 to 125K 1, 2, 5, 10 150

FP0010 FP10 - 10 - 700 25 to 125K 1, 2, 5, 10 150

FP0067 FP67 5 - - 500 35 to 19K 1, 2, 5, 10 150

FP0069 FP69 3 - 2 500 25 to 126K 1, 2, 5, 10 150

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: FP000251K1F9251B8 (preferred part numbering format)

GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE SPEC CODES PACKAGING (2)

(See Standard

Electrical

Specifications

table)

R = 

K = k

M = M

10R0 = 10 

1K30 = 1.3 k

1M00 = 1.0 M

F = ± 1 %

G = ± 2 %

J = ± 5 %

K = ± 10 %

(See Spec

Codes table)

EK = Lead (Pb)-free, strip

EL = Lead (Pb)-free, lacer

EA = Lead (Pb)-free, T/R

B8 = Tin/lead, strip

LB = Tin/lead, lacer

CH = Tin/lead, T/R (750 pieces)

CJ = Tin/lead, T/R (1000 pieces)

G1 = Tin/lead, T/R (600 pieces)

Historical Part Number: FP2 5112 F B8 (will continue to be accepted)

FP2 5112 F B8

HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING

P x R

0025 K F91P0 51B2F 81

www.vishay.com Vishay Dale

Revision: 22-Nov-11 2Document Number: 31020

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Clean lead to clean lead dimensions on FP1/2 are 0.347" (11.10 mm) maximum.

DERATING

DIMENSIONS in inches (millimeters)

GLOBAL

MODEL AB D

FP01/2 0.360 ± 0.020 (9.14 ± 0.51) (1) 0.138 + 0.012 - 0.023 (3.51 + 0.31 - 0.58) 0.032 ± 0.002 (0.81 ± 0.05)

FP0001 0.560 ± 0.031 (14.22 ± 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.032 ± 0.002 (0.81 ± 0.05)

FP0032 0.560 ± 0.031 (14.22 ± 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.040 ± 0.002 (1.02 ± 0.05)

FP0002 0.687 ± 0.031 (17.45 ± 0.79) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP0042 0.687 ± 0.031 (17.45 ± 0.79) 0.300 ± 0.020 (7.62 ± 0.51) 0.045 ± 0.002 (1.14 ± 0.05)

FP0003 0.900 ± 0.031 (22.86 ± 0.79) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP0004 1.530 ± 0.035 (38.86 ± 0.89) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP0005 1.710 ± 0.035 (43.43 ± 0.89) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP0007 2.040 ± 0.035 (51.82 ± 0.89) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP0010 2.040 ± 0.035 (51.82 ± 0.89) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP0067 0.900 ± 0.031 (22.86 ± 0.79) 0.300 ± 0.020 (7.62 ± 0.51) 0.032 ± 0.002 (0.81 ± 0.05)

FP0069 0.516 ± 0.021 (13.11 ± 0.53) 0.225 ± 0.012 (5.72 ± 0.31) 0.032 ± 0.002 (0.81 ± 0.05)

1.500 ± 0.125

(38.10 ± 3.18)

AMBIENT TEMPERATURE °C

FP0001, FP0002, FP0003,

FP0004, FP0005, FP0007

FP01/2

FP0032

FP0042

100

0 50 100 150 200 250

REWOP

ETAR

0 50 100 150 200 250

100

FP0069

3 W

2 W

0.6 W

70 AMBIENT TEMPERATURE °C

REW

O %

FP0010

0 50 100 150 200 250

100

AMBIENT TEMPERATURE °C

REWOP DE

0 50 100 150 200 250

100

FP0067

5 W

4 W

3 W

AMBIENT TEMPERATURE °C

REWOP

www.vishay.com Vishay Dale

Revision: 22-Nov-11 3Document Number: 31020

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SPEC CODES

GLOBAL

MODEL SPEC RESISTOR

TOLERANCE DESCRIPTION

FP01/2 5605 1, 2, 5, 10 Color banded, 4 or 5 bands depending on tolerance

5610 1, 2, 5, 10 Alphanumeric marking

FP0001 6200 2, 5, 10 Color banded, 4 bands

6201 1 Color banded, 5 bands

FP0032 6601 1 Color banded, 5 bands

6602 2, 5, 10 Color banded, 4 bands

FP0002 9251 1, 2, 5, 10 Alphanumeric marking

FP0042 9201 1 Color banded, 5 bands

9202 2, 5, 10 Color banded, 4 bands

FP0003

9300 1, 2, 5, 10 Alphanumeric marking

9320 2, 5, 10 Color banded, 4 bands

9330 1 Color banded, 5 bands

FP0004 9400 1, 2, 5, 10 Alphanumeric marking

FP0005 9500 1, 2, 5, 10 Alphanumeric marking

FP0007 9700 1, 2, 5, 10 Alphanumeric marking

FP0010 9800 1, 2, 5, 10 Alphanumeric marking

FP0067 9550 1, 2, 5, 10 Alphanumeric marking

FP0069

7500 1, 2, 5, 10 Alphanumeric marking

7536 2, 5, 10 Color banded, 4 bands

7538 1 Color banded, 5 bands

MARKING

- DALE - Value - Tolerance - Model and case size

(Date and source code included on some styles)

± 1 % tolerance parts are marked with 5 color bands.

5 bands, EIA Standard RS196.

± 2 %, ± 5 % and ± 10 % tolerance parts are marked with

4 color bands. 4 band commercial, EIA Standard.

Third significant figure Multiplier Tolerance, 1-1/2 times size

First significant figure Second significant figure

Multiplier Tolerance

First significant figure Second significant figure

www.vishay.com Vishay Dale

Revision: 22-Nov-11 4Document Number: 31020

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PERFORMANCE

TEST MAXIMUM R (TYPICAL TEST LOTS) ± %

FP01/2 FP0001 FP0032 FP0002 FP0042 FP0003 FP0004 FP0005 FP0007 FP0010 FP0067 FP0069

Short Time Overload 0.5 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

Low Temperature

Operation 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25

Moisture Resistance 1.0 1.5 1.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

Shock 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

Vibration 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

Temperature Cycle 1.0 1.0 1.0 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5

Load Life

(1000 h Rated

Conditions)

1.0 2.0 2.0 5.0 2.0 5.0 5.0 5.0 5.0 5.0 5.0 3.0

Terminal Strength 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

Dielectric

Withstanding

Voltage

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25

Effect Solder Heat 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25

PACKAGING

GLOBAL MODEL PACKAGING TYPE PACKAGING CODE

LEAD (Pb)-BEARING LEAD (Pb)-FREE

FP01/2, FP0001, FP0032, FP0069 Strip B8 EK

Tape/reel CJ EA

FP0002, FP0003, FP0042, FP0067 Strip B8 EK

Tape/reel CH EA

FP0004 Lacer LB EL

Tape/reel G1 EA

FP0005, FP0007, FP0010 Lacer LB EL

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.