FP www.vishay.com Vishay Dale Metal Film Resistors, Industrial, Flameproof FEATURES * Small physical size * Low cost * FP resistors have the ability to withstand overloads up to 100 times rated power without any trace of flame * Exceptional frequency characteristics * Especially suited for circuitry where functions, environments and duty cycles demand power resistors * Electroplated tin-lead or lead (Pb)-free solder finish leads * Tighter tolerances available on request * Compliant to RoHS Directive 2002/95/EC Note * Pb containing terminations are not RoHS compliant, exemptions may apply STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL FP01/2 FP0001 FP0032 FP0002 FP0042 FP0003 FP0004 FP0005 FP0007 FP0010 FP0067 FP0069 FP1/2 FP1 FP32 FP2 FP42 FP3 FP4 FP5 FP7 FP10 FP67 FP69 POWER RATING P40 C W 3 4 5 6 10 - POWER RATING P25 C W 3.5 4 5.5 6.5 7.5 5 3 Note Continuous working voltage shall be (1) POWER RATING P70 C W 0.5 1 1 2 2 3 4 5 7 2 MAXIMUM WORKING VOLTAGE (1) V 350 500 500 500 500 500 500 600 700 700 500 500 RESISTANCE RANGE TOLERANCE % TEMPERATURE COEFFICIENT ppm/C 10 to 1M 10 to 1M 10 to 1M 25 to 125K 25 to 125K 22 to 125K 70 to 125K 70 to 125K 25 to 125K 25 to 125K 35 to 19K 25 to 126K 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 1, 2, 5, 10 150 150 150 150 150 150 150 150 150 150 150 150 P x R or maximum working voltage, whichever is less. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FP000251K1F9251B8 (preferred part numbering format) F P 0 0 0 2 5 1 K 1 F 9 2 5 1 B 8 GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE SPEC CODES PACKAGING (2) (See Standard Electrical Specifications table) R= K = k M = M 10R0 = 10 1K30 = 1.3 k 1M00 = 1.0 M F=1% G=2% J=5% K = 10 % (See Spec Codes table) EK = Lead (Pb)-free, strip EL = Lead (Pb)-free, lacer EA = Lead (Pb)-free, T/R B8 = Tin/lead, strip LB = Tin/lead, lacer CH = Tin/lead, T/R (750 pieces) CJ = Tin/lead, T/R (1000 pieces) G1 = Tin/lead, T/R (600 pieces) Historical Part Number: FP2 5112 F B8 (will continue to be accepted) FP2 5112 F B8 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note (2) Some packaging codes are model specific. Revision: 22-Nov-11 Document Number: 31020 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FP www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 1.500 0.125 (38.10 3.18) B A D GLOBAL MODEL A B D FP01/2 0.360 0.020 (9.14 0.51) (1) 0.138 + 0.012 - 0.023 (3.51 + 0.31 - 0.58) 0.032 0.002 (0.81 0.05) FP0001 0.560 0.031 (14.22 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.032 0.002 (0.81 0.05) FP0032 0.560 0.031 (14.22 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.040 0.002 (1.02 0.05) FP0002 0.687 0.031 (17.45 0.79) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) FP0042 0.687 0.031 (17.45 0.79) 0.300 0.020 (7.62 0.51) 0.045 0.002 (1.14 0.05) FP0003 0.900 0.031 (22.86 0.79) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) FP0004 1.530 0.035 (38.86 0.89) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) FP0005 1.710 0.035 (43.43 0.89) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) FP0007 2.040 0.035 (51.82 0.89) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) FP0010 2.040 0.035 (51.82 0.89) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) FP0067 0.900 0.031 (22.86 0.79) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) FP0069 0.516 0.021 (13.11 0.53) 0.225 0.012 (5.72 0.31) 0.032 0.002 (0.81 0.05) Note (1) Clean lead to clean lead dimensions on FP1/2 are 0.347" (11.10 mm) maximum. 100 FP0001, FP0002, FP0003, FP0004, FP0005, FP0007 80 60 FP01/2 FP0032 FP0042 40 20 0 50 100 150 3W 80 2W 60 FP0069 40 0.6 W 20 0 250 50 80 60 40 FP0010 100 150 200 250 AMBIENT TEMPERATURE C 70 % OF RATED POWER 100 20 100 AMBIENT TEMPERATURE C 70 % OF RATED POWER 200 % OF RATED POWER % OF RATED POWER DERATING 100 5W 80 4W 60 3W 40 FP0067 20 0 50 40 Revision: 22-Nov-11 100 150 200 250 AMBIENT TEMPERATURE C 0 50 100 150 200 250 AMBIENT TEMPERATURE C Document Number: 31020 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FP www.vishay.com Vishay Dale SPEC CODES GLOBAL MODEL FP01/2 FP0001 FP0032 FP0002 SPEC RESISTOR TOLERANCE DESCRIPTION 5605 1, 2, 5, 10 Color banded, 4 or 5 bands depending on tolerance 5610 1, 2, 5, 10 Alphanumeric marking 6200 2, 5, 10 Color banded, 4 bands 6201 1 Color banded, 5 bands 6601 1 Color banded, 5 bands 6602 2, 5, 10 Color banded, 4 bands 9251 1, 2, 5, 10 Alphanumeric marking 9201 1 Color banded, 5 bands 9202 2, 5, 10 Color banded, 4 bands 9300 1, 2, 5, 10 Alphanumeric marking 9320 2, 5, 10 Color banded, 4 bands 9330 1 Color banded, 5 bands FP0004 9400 1, 2, 5, 10 Alphanumeric marking FP0005 9500 1, 2, 5, 10 Alphanumeric marking FP0007 9700 1, 2, 5, 10 Alphanumeric marking FP0010 9800 1, 2, 5, 10 Alphanumeric marking FP0067 9550 1, 2, 5, 10 Alphanumeric marking 7500 1, 2, 5, 10 Alphanumeric marking 7536 2, 5, 10 Color banded, 4 bands 7538 1 Color banded, 5 bands FP0042 FP0003 FP0069 MARKING - DALE - Value - Tolerance 1 % tolerance parts are marked with 5 color bands. 5 bands, EIA Standard RS196. First significant figure Third significant figure Revision: 22-Nov-11 Second significant figure Multiplier Tolerance, 1-1/2 times size - Model and case size (Date and source code included on some styles) 2 %, 5 % and 10 % tolerance parts are marked with 4 color bands. 4 band commercial, EIA Standard. First significant figure Multiplier Second significant figure Tolerance Document Number: 31020 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FP www.vishay.com Vishay Dale PERFORMANCE TEST MAXIMUM R (TYPICAL TEST LOTS) % FP01/2 FP0001 FP0032 FP0002 FP0042 FP0003 FP0004 FP0005 FP0007 FP0010 FP0067 FP0069 Short Time Overload 0.5 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Low Temperature Operation 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25 Moisture Resistance 1.0 1.5 1.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Shock 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Vibration 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Temperature Cycle 1.0 1.0 1.0 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 Load Life (1000 h Rated Conditions) 1.0 2.0 2.0 5.0 2.0 5.0 5.0 5.0 5.0 5.0 5.0 3.0 Terminal Strength 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Dielectric Withstanding Voltage 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25 Effect Solder Heat 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25 PACKAGING GLOBAL MODEL FP01/2, FP0001, FP0032, FP0069 FP0002, FP0003, FP0042, FP0067 FP0004 FP0005, FP0007, FP0010 Revision: 22-Nov-11 PACKAGING TYPE PACKAGING CODE LEAD (Pb)-BEARING LEAD (Pb)-FREE Strip B8 EK Tape/reel CJ EA Strip B8 EK Tape/reel CH EA Lacer LB EL Tape/reel G1 EA Lacer LB EL Document Number: 31020 4 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000