WIRE WOUND RESISTORS SILICONE COATED TYPE TM HIP SERIES Flame Retardant Silicone Coating Alloy Resistance Wire, wound On Ceramic Core POWER TYPE Silicone Coated Wire Wound Resistors Industrial Applications Tin Plated, PCB Type Termination PCB type termination which can be easily inserted and wave soldered on to the PCB. Especially designed for use in B/W and colour monitors. R 10 to 90K APPLICABLE STANDARDS EIA - RS - 155 - B, Char. G and JIS - C6401 Char. G. PHYSICAL CONFIGURATION HTR TYPE D L D H H 4.0+0.5 4.5+0.5 P 3 +0.1 0.9 +0.1 H3P H3P H5P H7P H10P POWER RATING at 25C 3W 5W 7W 10W H5P, H7P and H10P DIMENSIONS (mm) L +1.5 D (max) P +1.5 H +1 20.0 25.0 40.0 54.0 6.5 8.5 8.5 8.5 12.5 15.0 29.5 43.0 18.5 22.5 22.5 22.5 RESISTANCE TYPICAL RANGE WT. min max PER PC (gms) R05 R05 R05 R05 6K8 39K 86K 90K 2.6 3.7 5.6 6.8 For resistance values < 1R0 + 0.8mm allowed. ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS / DATA Test Performance Requirements Resistance tolerance + 10% [K]; + 5% [J] + 2% [G]+ 1%[F] DERATING CURVE 100% Insulation resistance Temperature co-efficient 83.5% > + + + + 1000 M [Dry] 200 ppm/ C [< R10] 90 ppm/ C [< 1R0] 60 ppm/ C [< 100R] 100ppm/ C [> 100R] Short time overload Max D R+[ 2%+R05] Moisture Resistance Max D R+ [5%+R05] Load life Max D R+ [5%+R05] Ambient operating temperature range. Rated Dissipation [%] Rated ambient temperature at 25C full power dissipation 50% 0 -40C to +155C 25 70 100 200 275 0 Ambient Temperature [ C] TYPICAL APPLICATIONS HIP series of power type wire wound resistors have been specifically developed to cater to those OEMs which have automated assembly facilities for TV's and audio equipment. The terminations are designed as per international specifications so that they merely have to be inserted into the PCB and wave soldered. HIP series is coated with a fire retardant coating which may well be compatible with UL standards as a special safety feature to prevent any dripping even at high overloads. Due to the configuration and method of manufacture, resistors of HIP series have rigidly bonded terminations ensuring high endurance against vibration / shock. ORDERING INFORMATION HIP H7P 150R J TOLERANCE RESISTANCE VALUE HTR TYPE SERIES The Words - "Applicable Standards" do not necessarily signify certification to that standard, however the tests mentioned are carried out on the broad based guidelines set out in these standards. HIp WIRE WOUND RESISTORS SILICONE COATED TYPE TM