HIP
SERIES
WIRE WOUND RESISTORS
SILICONE COATED TYPE
APPLICABLE STANDARDS
PHYSICAL CONFIGURATION
POWER TYPE
Silicone Coated Wire Wound Resistors
Industrial Applications
EIA - RS - 155 - B, Char. G and JIS - C6401 Char. G.
H5P, H7P
and H10P
D
H
3 +0.1
H3P
D
H
0.9 +0.1
4.5+0.5
P
L
4.0+0.5
HTR
TYPE
POWER
RATING
at 25°C
L
+1.5 P
+1.5
DIMENSIONS (mm)
H
+1
RESISTANCE
RANGE
min max
H3P 3W 20.0 6.5 12.5 18.5 R05 6K8 2.6
H5P 5W 25.0 8.5 15.0 22.5 R05 39K 3.7
H7P 7W 40.0 8.5 29.5 22.5 R05 86K 5.6
H10P 10W 54.0 8.5 43.0 22.5 R05 90K 6.8
D
(max)
TYPICAL
WT.
PER PC
(gms)
For resistance values < 1R0 + 0.8mm allowed.
TM
Flame Retardant
Silicone Coating
Alloy Resistance Wire,
wound On Ceramic Core
Tin Plated,
PCB Type Termination
PCB type termination which can be easily inserted
and wave soldered on to the PCB.
Especially designed for use in B/W and colour monitors.
R 10 to 90K
DERATING CURVE
100%
83.5%
50%
0
Rated Dissipation [%]
25 70 100 200 275
0
Ambient Temperature [ C]
ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS / DATA
Performance Requirements
Test
Resistance tolerance + 10% [K]; + 5% [J] + 2% [G]+ 1%[F]
Rated ambient temperature at 25°C full power dissipation
Insulation resistance > 1000 M [Dry]
Temperature co-efficient + 200 ppm/ °C [< R10]
+ 90 ppm/ °C [< 1R0]
+ 60 ppm/ °C [< 100R]
+ 100ppm/ °C [> 100R]
Short time overload Max D R+[ 2%+R05]
Moisture Resistance Max D R+ [5%+R05]
Load life Max D R+ [5%+R05]
Ambient operating
temperature range. -40°C to +155°C
WIRE WOUND RESISTORS
SILICONE COATED TYPE
HIp
TM
The Words - “Applicable Standards” do not necessarily signify certification to that standard, however the
tests mentioned are carried out on the broad based guidelines set out in these standards.
TYPICAL APPLICATIONS
HIP series of power type wire wound resistors have been specifically developed to cater to those OEMs which
have automated assembly facilities for TV's and audio equipment.
The terminations are designed as per international specifications so that they merely have to be inserted into
the PCB and wave soldered.
HIP series is coated with a fire retardant coating which may well be compatible with UL standards as a special
safety feature to prevent any dripping even at high overloads.
Due to the configuration and method of manufacture, resistors of HIP series have rigidly bonded terminations
ensuring high endurance against vibration / shock.
TOLERANCE
RESISTANCE VALUE
HTR TYPE
SERIES
HIP 150R JH7P
ORDERING INFORMATION
