PHE840M RoHS Compliant * EMI suppressor, class X2, metallized polypropylene * 0.01 - 10.0 F, 275/280 VAC, +105C *Small dimensions including low profile capacitors typical applications For worldwide use as electromagnetic interference suppressor in all X2 and across-the-line applications. L Construction B Metallized polypropylene film encapsulated with selfextinguishing epoxy resin in a box of material recognized to UL 94 V-0. H Not for use in series with the mains. See www.kemet.com for more information. 0.5 Technical data d p Rated voltage 275 VAC 50/60 Hz (ENEC) 280 VAC 50/60 Hz (UL, cUL) Capacitance range 0.01 - 10.0 F Capacitance tolerance 20% standard, 10% option, 5% on request Temperature range -55 to +105C Climatic category 55/105/56/B Approvals ENEC, UL, cUL Dissipation factor Maximum values at +23C C 0.1 F 0.1F < C 1 F 1 kHz 0.1% 0.1% 10 kHz 0.2% 0.4% 100 kHz 0.6% - C > 1 F 0.1% 0.8% - Test voltage between terminals The 100% screening factory test is carried out at 2200 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. Insulation resistance C 0.33 F: 30 000 M C > 0.33 F: 10 000 s In DC applications Recommended voltage 760 VDC p d std l 7.5 0.4 10.0 0.4 15.0 0.4 22.5 0.4 27.5 0.4 37.5 0.5 0.6 0.6 0.8 0.8 0.8 1.0 17 17 17 6 6 6 Tolerance in lead length < 30 mm +0 -1 mm 30 mm +5 -0 mm Environmental test data Endurance EN/IEC 60384-14:2005 1.25 x UR VAC 50 Hz, once every hour increased to 1000 VAC for 0.1 s, 1000 h at upper rated temperature Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each, 10-55 Hz at 0.75 mm or 98 m/s2 No visible damage No open or short circuit Bump IEC 60068-2-29 Test Eb 1000 bumps at 390 m/s2 No visible damage No open or short circuit Upper and lower rated temperature 5 cycles No visible damage Change of temperature IEC 60068-2-14 Test Na Active flammability EN/IEC 60384-14:2005 Passive flammability Humidity Enclosure material of UL94V-0 flammability class IEC 60068-2-3 Test Ca +40C and 90 - 95% R.H. 56 days l b max l 20 30 30 30 30 30 b 0.4 0.4 0.4 0.4 0.4 0.7 phe840m article table Capaci- BoxMax dimensionsMax tance code in mm fO dU/dtArticle code F BHLMHzV/s Capaci- BoxMax dimensionsMax tance code in mm fO dU/dtArticle code F BHLMHzV/s Lead spacing 7.5 mm 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 K01 K01 K01 K03 K03 K03 K03 K03 K04 4.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 6.0 8.0 8.0 8.0 11.0 11.0 11.0 11.0 11.0 12.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 14 13 12 11 10 9.5 8.8 8.3 7.5 100 100 100 100 100 100 100 100 100 Lead spacing 22.5 mm PHE840MK5100MK01R17 PHE840MK5120MK01R17 PHE840MK5150MK01R17 PHE840MK5180MK03R17 PHE840MK5220MK03R17 PHE840MK5270MK03R17 PHE840MK5330MK03R17 PHE840MK5390MK03R17 PHE840MK5470MK04R17 lead spacing 10 mm 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.10 A01 A01 A01 A02 A02 A03 A03 A04 A05 A04 4.0 4.0 4.0 4.5 4.5 5.0 5.0 6.0 9.5 6.0 9.0 9.0 9.0 10.5 10.5 11.0 11.0 12.0 7.5 12.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 8.5 8.0 7.6 6.7 5.9 5.5 4.9 4.4 4.0 4.0 100 100 100 100 100 100 100 100 100 100 PHE840MA5220MA01R17 PHE840MA5270MA01R17 PHE840MA5330MA01R17 PHE840MA5390MA02R17 PHE840MA5470MA02R17 PHE840MA5560MA03R17 PHE840MA5680MA03R17 PHE840MA5820MA04R17 PHE840MP6100MA05R17 PHE840MA6100MA04R17 Lead spacing 15 mm 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.22 0.22 0.27 0.33 0.33 0.33 0.39 0.47 B04 B04 B04 B05 B05 B10 B10 B06 B06 B17 B12 B11 B11 B17 B14 B16 B16 5.5 5.5 5.5 5.5 5.5 6.5 6.5 7.5 7.5 13.0 8.0 8.5 8.5 13.0 9.5 11.0 11.0 10.5 10.5 10.5 12.5 12.5 12.5 12.5 14.5 14.5 12.5 15.0 16.0 16.0 12.5 17.5 19.0 19.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 5.0 4.6 4.2 3.9 3.7 3.3 2.8 2.7 2.6 2.5 2.5 2.3 2.2 2.2 2.0 1.9 1.8 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 PHE840MB5470MB04R17 PHE840MB5560MB04R17 PHE840MB5680MB04R17 PHE840MB5820MB05R17 PHE840MB6100MB05R17 PHE840MB6120MB10R17 PHE840MB6150MB10R17 PHE840MB6180MB06R17 PHE840MX6220MB06R17* PHE840MQ6220MB17R17 PHE840MB6220MB12R17 PHE840MB6270MB11R17 PHE840MX6330MB11R17* PHE840MH6330MB17R17* PHE840MB6330MB14R17 PHE840MB6390MB16R17 PHE840MB6470MB16R17 0.22 0.27 0.33 0.39 0.47 0.47 0.56 0.68 0.68 0.82 1.0 1.0 1.2 1.5 D13 D17 D17 D14 D14 D15 D15 D15 D18 D16 D16 D20 D19 D19 6.5 7.0 7.0 8.0 8.0 9.0 9.0 9.0 10.5 11.0 11.0 13.5 15.5 15.5 14.5 16.5 16.5 16.0 16.0 18.5 18.5 18.5 19.0 21.5 21.5 23.0 24.5 24.5 26.0 2.1 100 26.0 1.9 100 26.0 1.8 100 26.0 1.7 100 26.0 1.6 100 26.0 1.5 100 26.0 1.4 100 26.0 1.3 100 26.0 1.2 100 26.0 1.1 100 26.0 1.1 100 26.0 1.0 100 26.0 0.90 100 26.0 0.85 100 PHE840MD6220MD13R06L2 PHE840MD6270MD17R06L2 PHE840MD6330MD17R06L2 PHE840MD6390MD14R06L2 PHE840MY6470MD14R06L2* PHE840MD6470MD15R06L2 PHE840MD6560MD15R06L2 PHE840MY6680MD15R06L2* PHE840MD6680MD18R06L2 PHE840MD6820MD16R06L2 PHE840MY7100MD16R06L2* PHE840MD7100MD20R06L2 PHE840MD7120MD19R06L2 PHE840MD7150MD19R06L2 Lead spacing 27.5 mm 0.82 1.0 1.0 1.2 1.5 1.8 2.2 2.2 2.7 3.3 3.3 3.3 F11 F11 F12 F03 F13 F14 F14 F15 F15 F15 F16 F18 10.5 10.5 11.5 13.5 14.5 17.5 17.5 19.0 19.0 19.0 21.0 31.0 20.5 20.5 22.5 23.0 24.5 28.0 28.0 29.0 29.0 29.0 30.0 19.0 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 1.0 1.0 0.95 0.82 0.73 0.65 0.64 0.62 0.58 0.54 0.50 0.50 100 100 100 100 100 100 100 100 100 100 100 100 PHE840MF6820MF11R06L2 PHE840MZ7100MF11R06L2 * PHE840MF7100MF12R06L2 PHE840MF7120MF03R06L2 PHE840MF7150MF13R06L2 PHE840MF7180MF14R06L2 PHE840MZ7220MF14R06L2 * PHE840MF7220MF15R06L2 PHE840MF7270MF15R06L2 PHE840MZ7330MF15R06L2 * PHE840MF7330MF16R06L2 PHE840MT7330MF18R06L2 Lead spacing 37.5 mm 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 R05 R05 R04 R04 R02 R03 R06 R06 R08 R08 13.0 13.0 15.0 15.0 16.5 19.0 21.0 21.0 28.0 28.0 24.0 24.0 26.0 26.0 32.0 36.0 38.0 38.0 43.0 43.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 41.0 0.60 0.58 0.53 0.49 0.46 0.44 0.41 0.39 0.30 0.26 100 100 100 100 100 100 100 100 100 100 PHE840MR7180MR05R06L2 PHE840MR7220MR05R06L2 PHE840MR7270MR04R06L2 PHE840MR7330MR04R06L2 PHE840MR7390MR02R06L2 PHE840MR7470MR03R06L2 PHE840MR7560MR06R06L2 PHE840MR7680MR06R06L2 PHE840MR7820MR08R06L2 PHE840MR8100MR08R06L2 * Only 20% tolerance Approvals Marking Certification BodySpecification ENEC EN/IEC 60384-14:2005 (UR = 280 VAC) UL CAN/CSA-E60384-14:09 (UR = 280 VAC) * * * * * * * * * * RIFA RIFA article code Rated capacitance Capacitance tolerance code Rated voltage X2 Approval marks Manufacturing date code IEC climatic category Passive flammability class Ordering information The article code for the standard part is given in the article table. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.