Bulletin PD-20555 rev. B 02/03 30L30CT 30L30CTS 30L30CT-1 SCHOTTKY RECTIFIER 30 Amp Description/ Features Major Ratings and Characteristics Characteristics Values Units IF(AV) Rectangular 2 x 15 A 30 V 0.37 V - 55 to 150 C This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. waveform VRRM VF @ 15 Apk, TJ = 125C 150 C TJ operation Center tap configuration Very low forward voltage drop (Per Leg) TJ range High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Case Styles 30L30CT 30L30CTS Base Common Cathode Base Common Cathode 2 1 Anode 2 Common Cathode TO-220 www.irf.com 30L30CT -1 Base Common Cathode 2 3 Anode 1 Anode 2 Common Cathode D2PAK 2 3 Anode 1 Anode 2 Common Cathode 3 Anode TO-262 1 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Voltage Ratings 30L30CT 30L30CTS 30L30CT-1 30 Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS Values Per Device Per Leg Units Conditions 30 15 A Max. Peak One Cycle Non-Repetitive 1450 A Surge Current 220 Non-Repetitive Avalanche Energy 15 mJ 2 A 50% duty cycle @ TC = 140C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and 10ms Sine or 6ms Rect. pulse with rated VRRM applied TJ = 25 C, IAS = 2 Amps, L = 7.5 mH (Per Leg) IAR Repetitive Avalanche Current (Per Leg) Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM Values Max. Forward Voltage Drop (Per Leg) (1) Units Conditions 0.46 0.57 0.37 V V V @ 15A @ 30A @ 15A 0.50 V @ 30A TJ = 25 C TJ = 125 C Max. Reverse Leakage Current 1.50 mA TJ = 25 C (Per Leg) 350 mA TJ = 125 C CT Max. Junction Capacitance(Per Leg) 1500 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance (Per Leg) dv/dt Max. Voltage Rate of Change 8.0 nH 10000 V/s VR = rated VR Measured lead to lead 5mm from package body (Rated VR) (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters Values TJ Max. Junction Temperature Range -55 to 150 Tstg Max. Storage Temperature Range -55 to 150 Units Conditions C C RthJC Max. Thermal Resistance Junction to Case (Per Leg) 1.5 C/W DC operation RthJC Max. Thermal Resistance Junction to Case (Per Package) 0.8 C/W DC operation wt Approximate Weight T Mounting Torque 2 2 (0.07) Min. 6 (5) Max. 12 (10) g (oz.) Kg-cm (Ibf-in) www.irf.com 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 000 000 (mA) T = 150C J 125C 100 Reverse Current - I 100 75C 50C 1 25C 0.1 0.01 0 5 10 15 20 25 30 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage T = 150C (pF) 10000 T = 125C Junction Capacitance - C J 10 T = 25C J T Instantaneous Forward Current - I F (A) R 100C 10 J T = 25C J 1000 1 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 0 Forward Voltage Drop - VFM (V) 5 10 15 20 25 30 35 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 1 - Maximum Forward Voltage Drop Characteristics Thermal Impedance Z thJC (C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 0.1 Notes: Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t 2 2. Peak Tj = Pdmx ZthJC + Tc .01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics www.irf.com 3 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 10 45 Average Power Loss (Watts) Allowable Case Temperature (C) 50 DC 40 35 Square wave (D = 0.50) 8 6 DC RMS Limit DC = 0.20 DC = 0.25 DC = 0.33 DC = 0.50 DC = 0.75 4 2 see note (2) 30 0 5 10 15 20 Average Forward Current - I 0 25 0 (A) F(AV) 5 20 25 (A) F(AV) 10000 FSM (A) 15 Fig. 6 - Forward Power Loss Characteristics Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - I 10 Average Forward Current - I At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 1000 100 10 100 1000 Square Wave Pulse Duration - t 10000 p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) (2) Formula used: TC = TJ - Pd x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6) 4 www.irf.com 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Outline Table 10.54 (0.41) 1.32 (0.05) MAX. 3.78 (0.15) 3.54 (0.14) 1.22 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 2 1 2 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) Base Common Cathode 0.10 (0.004) 2 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 2.64 (0.10) 0.94 (0.04) 0.69 (0.03) 1 Anode 1 2 3 2 Common Cathode 3 Anode 0.61 (0.02) MAX. 4.57 (0.18) 4.32 (0.17) Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) 5.08 (0.20) REF. 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 0.55 (0.02) 8.89 (0.35) 3X REF. 1.40 (0.055) 1.14 (0.045) 2X Base Common Cathode 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 2 1 3 4.57 (0.18) 4.32 (0.17) 8.89 (0.35) 17.78 (0.70) 2 0.61 (0.02) MAX. 1 Anode 2 Common Cathode 3 5.08 (0.20) REF. 3.81 (0.15) Anode 2.08 (0.08) 2X 2.54 (0.10) 2X Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) www.irf.com 5 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Outline Table Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) Marking Information EXAMPLE: THIS IS A 30L30CT LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" 6 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 7 = 2001 WEEK 19 LINE C www.irf.com 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 30L30CT *************************************************************************************************** This model has been developed by Wizard SPICE MODEL GENERATOR (1999) (International Rectifier Corporation) contains Proprietary Information *************************************************************************************************** SPICE Model Diode is composed by a simple diode plus paralled VCG2T *************************************************************************************************** .SUBCKT 30l30ct ANO CAT D1 ANO 1 DMOD (0.08936) *Define diode model .MODEL DMOD D(IS=3.01789428908089E-04A,N=1.12506549677918,BV=35V, + IBV=0.40837541124234A,RS= 0.000285952,CJO=3.65460570356249E-08, + VJ=0.934944724736772,XTI=2, EG=0.674450307828855) *************************************************************************************************** *Implementation of VCG2T VX 1 2 DC 0V R1 2 CAT TRES 1E-6 .MODEL TRES RES(R=1,TC1=11.2856367229303) GP1 ANO CAT VALUE={-ABS(I(VX))*(EXP((((-2.138249E-03/11.28564)*((V(2,CAT)*1E6)/(I(VX)+1E-6)1))+1)*9.434315E-02*ABS(V(ANO,CAT)))-1)} *************************************************************************************************** .ENDS 30l30ct Thermal Model Subcircuit .SUBCKT 30L30CT 5 1 CTHERM1 CTHERM2 CTHERM3 CTHERM4 5 4 3 2 4 3 2 1 3.53E-1 6.35E0 5.15E+1 4.08E+3 RTHERM1 RTHERM2 RTHERM1 RTHERM1 5 4 3 2 4 3 2 1 3.15E-1 6.15E-1 3.7E-1 1.98E-1 .ENDS 30L30CT www.irf.com 7 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Ordering Information Table Device Code 30 L 30 C T -1 1 2 3 4 5 6 1 - 30 = Current Rating 2 - L = Schottky - L Series 3 - 30 = Voltage Rating 4 - C = Common Cathode 5 - T = TO-220 6 - 1 = TO-262 S = D2Pak Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02 /03 8 www.irf.com