RoHS Compliant High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Features * Low Noise Figure: 1.2 dB * High Input IP3: +18 dBm at 8 V, 60 mA bias +6.5 dBm at 3 V, 20 mA bias * High Gain: 16 dB * Single Supply: +3 to +8 VDC * Adjustable current: 20 to 80 mA with external resistor * Lead-Free SOIC-8 Package * 100% Matte Tin Plating over Copper * Halogen-Free "Green" Mold Compound * 260C Reflow Compatible * RoHS* Compliant Version of AM50-0003 MAALSS0043 V2 Functional Block Diagram GND GND REXT VDD RF IN RF OUT GND GND Description M/A-COM's MAALSS0043 is a high dynamic range, GaAs MMIC, low noise amplifier in a lead-free SOIC-8, surface mount plastic package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. Pin Configuration Pin No. Pin Name Description 1 GND RF and DC Ground 2 REXT External Current Control (optional) 3 RF IN RF Input of the amplifier 4 GND RF and DC Ground 5 GND RF and DC Ground 6 RF OUT RF Output of the amplifier 7 VDD Positive supply voltage 8 GND RF and DC Ground The MAALSS0043 also features flexible biasing to control the current consumption vs. dynamic range trade-off. The MAALSS0043 can operate from any supply voltage in the 3 V to 8 V range. Its current can be controlled over a range of 20 mA to 80 mA with an external resistor. The MAALSS0043 is ideally suited for use where low noise figure, high gain, high dynamic range, and low power consumption are required. Typical applications include receiver front ends in AMPS, GSM, and ETACS base stations. It is also useful as a gain block, buffer, driver, and IF amplifier in both fixed and portable cellular and 900 MHz ISM systems. The MAALSS0043 is fabricated using a low-cost 0.5-micron gate length GaAs process. The process features full passivation for increased performance reliability. Ordering Information 1 Part Number Package MAALSS0043 Bulk Packaging MAALSS0043TR-3000 3000 piece reel MAALSS0043SMB Sample Test Board 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant High Dynamic Range Low Noise Amplifier 800 - 1000 MHz MAALSS0043 V2 Electrical Specifications: TA = +25C, F = 900 MHz, PIN= -30 dBm, Z0 = 50 Parameter Test Conditions Typ. Max. 15 16 17 -- 13.5 -- dB -- 1.20 1.50 3 V, 20 mA dB -- 1.25 1.50 Input VSWR -- Ratio -- 2.0:1 -- Output VSWR -- Ratio -- 1.5:1 -- dBm -- 16.5 -- dBm -- 8.5 -- dBm 12.5 15 -- 3 V, 20 mA dBm -- 6.5 -- -- dB -- 25 -- Gain 5 V, 60 mA 2 3 V, 20 mA Noise Figure 5 V, 60 mA Output 1 dB Compression 5 V, 60 mA 2 2 3 V, 20 mA Input IP3 5 V, 60 mA Reverse Isolation 2. Absolute Maximum VDD +10 VDC dB dB Handling Procedures Please observe the following precautions to avoid damage: +17 dBm Static Sensitivity Current 120 mA Channel Temperature6 +150C Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 5 5. 6. 3,4 Parameter Input Power 4. Min. Using external 15 resistor. See functional block diagram. Absolute Maximum Ratings 3. 2 Units Operating Temperature -40C to +85C Storage Temperature -65C to +150C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. When pin #2 is used to increase current (see note 8). Thermal resistance (jc) = +88C/W. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant High Dynamic Range Low Noise Amplifier 800 - 1000 MHz MAALSS0043 V2 Typical Performance Curves Test Conditions: TA = +25C, Z0 = 50 , VDD = 5 V, IDD = 60 mA unless otherwise specified. Gain vs. Frequency VSWR vs. Frequency 5 17 INPUT OUTPUT 3V 16 8V 4 15 3 14 2 13 12 0.5 0.7 0.9 1.1 1 0.5 0.7 0.9 1.1 Frequency (GHz) Frequency (GHz) Noise Figure vs. Current, F = 900 MHz Noise Figure vs. Frequency 1.4 1.4 V DD V DD = 3 V to 8 V = 3 V to 8 V 1.3 1.3 1.2 1.1 1.2 1.1 1.0 1.0 0.80 20 0.85 0.90 0.95 40 1.00 DD Frequency (GHz) 24 24 20 20 16 16 3 5 6 8 12 8 0.80 80 (mA) Output P1dB vs. Current, F = 900 MHz Output P1dB vs. Frequency 3 60 I V V V V 3V 5V 6V 8V 12 8 0.85 0.90 0.95 1.00 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 20 40 60 80 * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Frequency (GHz) Typical Performance Curves MAALSS0043 V2 I DD (mA) Test Conditions: TA = +25C, Z0 = 50 , VDD = 5 V, IDD = 60 mA unless otherwise specified. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant High Dynamic Range Low Noise Amplifier 800 - 1000 MHz MAALSS0043 V2 Typical Performance Curves Test Conditions: TA = +25C, Z0 = 50 , VDD = 5 V, IDD = 60 mA unless otherwise specified. Input IP3 vs. Current, F = 900 MHz Input IP3 vs. Frequency 21 21 17 17 V V V V 13 13 3 5 6 8 V V V V 9 9 5 0.80 3 5 6 8 5 0.85 0.90 0.95 20 1.00 Frequency (GHz) 40 60 I DD 80 (mA) Lead-Free SOIC-8 Reference Application Note M538 for lead-free solder reflow recommendations. 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Recommended PCB Configuration MAALSS0043 V2 Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.20 mm) yielding a 50 line width of 0.015" (0.38 mm). The recommended RF metalization is 1 ounce copper. Functional Schematic External Component List 7 Part Value Case Size Manufacturer Purpose C1 47 pF 0603 Murata DC Block C2 470 pF 0603 Murata By-Pass L1 12 nH 0603 Coilcraft Tuning L2 12 nH 0603 Coilcraft RF Choke R1 5.1 K 0603 Panasonic DC Return R2 See Note 8 0603 Panasonic Optional current control 7. 8. All external components are readily available, low cost surface mount components. Pin 2 allows use of an external resistor to ground for optional, higher current. For 20 mA operation, no resistor is used. For IDD ~ 40 mA, R2 = 43 ohms; IDD ~ 60 mA, R2 = 15 ohms; IDD ~ 80 mA, R2 = 10 ohms. 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.