CNY17-x Phototransistor Optocoupler High Collector-Emitter Voltage Type Data Sheet Description The CNY17 contains a light emitting diode optically coupled to a photo-transistor. It is packaged in a 6-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Collector-emitter voltage is above 70 V. Response time, tr, is typically 5 s and minimum CTR is 40% at input current of 10 mA. Applications * System appliances, measuring instruments * Signal transmission between circuits of different potentials and impedances * Feedback circuit in power supply Functional Diagram PIN NO. AND INTERNAL CONNECTION DIAGRAM 6 5 4 Features * High collector-emitter voltage (VCEO = 70 V) * High input-output isolation voltage (Viso = 5000 Vrms) * Current Transfer Ratio (CTR: min. 40% at IF = 10 mA, VCE = 5 V) * Response time (tr: typ., 5 s at VCC = 10 V, IC = 2 mA, RL = 100 ) * Dual-in-line package * UL approved * CSA approved * IEC/EN/DIN EN 60747-5-2 approved * Options available: - Leads with 0.4" (10.16 mm) spacing (W00) - Leads bend for surface mounting (300) - Tape and reel for SMD (500) - IEC/EN/DIN EN 60747-5-2 approvals (060) Schematic ANODE 1 IF 6 + BASE VF CATHODE 1 2 1. ANODE 2. CATHODE 3. NC - 2 IC 5 3 4. EMITTER 5. COLLECTOR 6. BASE 4 COLLECTOR EMITTER CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information CNY17-x is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA 88324. Part Number CNY17 RoHS Compliant Option -1 40% <CTR< 80% -2 63% <CTR< 125% -3 100% <CTR< 200% -4 160% <CTR< 320% Package -000E -000E -000E -000E 300 mil DIP-6 -300E -300E -300E -300E 300 mil DIP-6 X X -500E -500E -500E -500E 300 mil DIP-6 X X -060E -060E -060E -060E 300 mil DIP-6 -360E -360E -360E -360E 300 mil DIP-6 X X -560E -560E -560E -560E 300 mil DIP-6 X X -W00E -W00E -W00E -W00E 400 mil DIP-6 -W60E -W60E -W60E -W60E 400 mil DIP-6 Surface Gull Tape IEC/EN/DIN Mount Wing & Reel EN60747-5-2 Quantity 65 pcs per tube 65 pcs per tube X X 1000 pcs per reel X 65 pcs per tube X 65 pcs per tube X 1000 pcs per reel 65 pcs per tube X 65 pcs per tube To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: CNY17-1-360E to order product of 300 mil DIP-6 DC Gull Wing Surface Mount package in Tube packaging with 40%<CTR<80%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant. Example 2: CNY17-2-W00E to order product of 400 mil DIP-6 DC in Tube packaging with 63%<CTR<125% and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings CNY17-X-000E MODEL NO. LEAD FREE A CNY17 Y Y WW 7.3 0.5 (0.287) 7.62 0.3 (0.3) 3.5 0.5 (0.138) 6.5 0.5 (0.256) ANODE DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES) 0.5 TYP. (0.02) 3.3 0.5 (0.13) 2.8 0.5 (0.110) 2.54 0.25 (0.1) 0.26 (0.010) 0.5 0.1 (0.02) 7.62 ~ 9.98 CNY17-X-060E 7.3 0.5 (0.287) MODEL NO. LEAD FREE A CNY17- V Y Y WW 7.62 0.3 (0.3) 3.5 0.5 (0.138) 6.5 0.5 (0.256) DATE CODE DIMENSIONS IN MILLIMETERS AND (INCHES) 0.5 TYP. (0.02) 3.3 0.5 (0.13) 2.8 0.5 (0.110) ANODE 2.54 0.25 (0.1) 0.26 (0.010) 0.5 0.1 (0.02) 7.62 ~ 9.98 CNY17-X-W00E 7.3 0.5 (0.287) MODEL NO. LEAD FREE A CNY17 Y Y WW ANODE 3.5 0.5 (0.138) 6.5 0.5 (0.256) 6.9 0.5 (0.272) 2.3 0.5 (0.09) 2.8 0.5 (0.110) DATE CODE 2.54 0.25 (0.1) DIMENSIONS IN MILLIMETERS AND (INCHES) 7.62 0.3 (0.3) 0.5 0.1 (0.02) 0.26 (0.010) 10.16 0.5 (0.4) CNY17-X-300E MODEL NO. LEAD FREE A CNY17 Y Y WW ANODE 7.3 0.5 (0.287) 7.62 0.3 (0.3) 0.35 +0.15/-0.10 (0.014) 3.5 0.5 (0.138) 6.5 0.5 (0.256) 1.2 0.1 (0.047) DATE CODE 2.54 0.25 (0.1) 1.0 0.25 (0.039) 0.35 0.25 (0.014) 10.16 0.3 (0.4) DIMENSIONS IN MILLIMETERS AND (INCHES) 2) When using another soldering method such as infrared ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of (1) above. 30 seconds 250C Temperature (C) Solder Reflow Temperature Profile 1) One-time soldering reflow is recommended within the condition of temperature and time profile shown at right. 217C 200C 150C 60 sec 25C 60 ~ 150 sec 90 sec Time (sec) Note: Non-halide flux should be used. Absolute Maximum Ratings Storage Temperature, TS -55C to +150C Operating Temperature, TA -55C to +100C Lead Solder Temperature, max. (1.6 mm below seating plane) 260C for 10 s Average Forward Current, IF 60 mA Reverse Input Voltage, VR 6V Input Power Dissipation, PI 100 mW Collector Current, IC 150 mA Collector-Emitter Voltage, VCEO 70 V Emitter-Collector Voltage, VECO 6V Collector-Base Voltage, VCBO 70 V Collector Power Dissipation 150 mW Total Power Dissipation 250 mW Isolation Voltage, Viso (AC for 1 minute, R.H. = 40 ~ 60%) 5000 Vrms 260C (Peak Temperature) 60 sec Electrical Specifications (TA = 25C) Parameter Symbol Min. Typ. Max. Units Test Conditions Forward Voltage VF - 1.4 1.7 V IF = 60 mA Reverse Current IR - - 10 A VR = 6 V Terminal Capacitance Ct - - 100 pF V = 0, f = 1 MHz Collector Dark Current ICEO - - 50 nA VCE = 10 V Collector-Emitter Breakdown Voltage BVCEO 70 - - V IC = 0.1 mA, IF = 0 Emitter-Collector Breakdown Voltage BVECO 6 - - V IE = 10 A, IF = 0 Collector-Base Breakdown Voltage BVCBO 70 - - V IC = 0.1 mA, IF = 0 Collector Current IC 4 - 32 mA IF = 10 mA 40 63 100 160 - - - - 80 % VCE = 5 V 125 200 320 *Current Transfer Ratio CNY17-1 CTR CNY17-2 CNY17-3 CNY17-4 Collector-Emitter Saturation Voltage VCE(sat) - - 0.3 V IF = 10 mA, IC = 2.5 mA Response Time (Rise) tr - 5 10 s VCE = 5 V, IC = 10 mA Response Time (Fall) tf - 5 10 s RL = 100 Isolation Resistance Riso - - DC 500 V 40 ~ 60% R.H. Floating Capacitance V = 0, f = 1 MHz 1 x 1011 Cf - 2 pF 60 40 20 0 -55 -25 0 25 50 75 100 125 TA - AMBIENT TEMPERATURE - C Figure 1. Forward current vs. temperature. CNY17-1 fig 1 2 200 160 150 VOLTAGE GAIN AV - dB 80 PC - COLLECTOR POWER DISSIPATION - mW IC x 100% IF * CTR = IF - FORWARD CURRENT - mA - 100 50 0 -55 -25 0 25 50 75 100 125 TA - AMBIENT TEMPERATURE - C Figure 2. Collector power dissipation vs. temperaCNY17-1 fig 2 ture. IF = 10 mA VCC = 5 V TA = 25C 0 -2 -4 -6 RL = 200 RL = 150 RL = 75 -8 -10 0.5 1 2 5 10 20 50 100 200 500 f - FREQUENCY - kHz Figure 3. Frequency response. CNY17-1 fig 3 100 TA = 50C TA = 0C TA = 25C TA = -25C 50 20 10 5 2 1 0 0.5 1.0 1.5 2.0 2.5 3.0 160 140 RBE = 120 100 80 60 100 k 40 500 k 20 0 0 2 VF - FORWARD VOLTAGE - V VCE(SAT.) - COLLECTOR-EMITTER SATURATION VOLTAGE - V RELATIVE CURRENT TRANSFER RATIO - % 0.16 100 50 -25 0 25 50 75 100 CNY17-1 fig 7 0.08 0.06 0.04 0.02 tf 2 1 0.1 0.2 RL - LOAD RESISTANCE - k Figure 10. Response time vs. load resistance. CNY17-1 fig 10 0 25 50 75 100 CNY17-1 fig 8 0.5 IC = 0.5 mA 4 IC = 1 mA 3 IC = 2 mA 2 IC = 3 mA IC = 5 mA 1 0 0 2.5 5.0 7.5 20 IF = 10 mA 15 10 IF = 5 mA 5 IF = 2 mA 0 2 4 6 8 10 10.0 IF - FORWARD CURRENT - mA Figure 11. Collector-emitter saturation voltage vs. CNY17-1 fig 11 forward current. 10-6 VCE = 10 V 10-7 10-8 10-9 10-10 10-11 10-12 10-13 -30 0 20 40 60 80 Figure 9. Collector darkCNY17-1 current vs.fig temperature. 9 TA = 25C 5 IF = 20 mA 25 100 TA - AMBIENT TEMPERATURE - C Figure 8. Collector-emitter saturation voltage vs. temperature. VCE(SAT.) - COLLECTOR-EMITTER SATURATION VOLTAGE - V RESPONSE TIME - s VCC = 5 V TA = 25C 0.05 -25 30 Figure 6. Collector current vs. collector-emitter voltCNY17-1 fig 6 age. 0.10 0 -55 PC (MAX.) 35 VCE - COLLECTOR-EMITTER VOLTAGE - V 0.12 6 IF = 10 mA tr 0.5 0.02 50 TA - AMBIENT TEMPERATURE - C Figure 7. Relative current transfer ratio vs. temperature. 5 20 IF = 10 mA IC = 2.5 mA 0.14 TA - AMBIENT TEMPERATURE - C 10 10 Figure 5. Current transfer ratio vs.figforward current. CNY17-1 5 IF = 10 mA VCE = 5 V 0 -55 5 TA = 25C 40 IF = 30 mA 0 IF - FORWARD CURRENT - mA Figure 4. Forward current vs. forward CNY17-1 fig 4voltage. 150 45 VCE = 5 V TA = 25C 180 ICEO - COLLECTOR DARK CURRENT - A 200 200 IC - COLLECTOR CURRENT - mA TA = 75C CTR - CURRENT TRANSFER RATIO - % IF - FORWARD CURRENT - mA 500 12.5 Test Circuit for Response Time Test Circuit for Frequency Response VCC INPUT VCC RL RD RD OUTPUT OUTPUT ~ INPUT 10% OUTPUT 90% ts td tr tf For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologie s Limited in the United States and other countries. Data subject to change. Copyright (c) 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0536EN AV02-0772EN - October 18, 2007 RL