4 3 L 2 1 the express conaifon that ii Is not To. be. disclosed, reproduced er used, Tn REVISIONS Corporation wil "prior concer hal no Might Is granted to disclose sym] ECN DESCRIPTION DATE APPROVED or to use any Information In Is jocument. ( U S qT 0 M E R D R A W | N G 1 N/A PRELIMINARY PROPOSAL Mar.13,2017 PART NUMBER SYSTEM CE1XXXXX011011X Lona ting SPEC A POWER PIN COUNT CARD THICKNESS & 0.76um Au in B 0: WITHOUT POWER PIN 0: 1.60MM oo ey 0.80 2 C 2: 2PIN S| 18d. | 4 3 4: 4PIN GUIDE HOLE ~ [S sn = te} __{1.0) 6: 6PIN 0: WITHOUT GUIDE HOLE |_ WBBBBBRRBBBBBE oy 2 G WITHGUIDEHOLE GR SN |) 08 Ls taneonaageeaene { x "155 wt 2X2.70 {ly 1 SIGNAL PIN COUNT ww 77H Ft Coy : . NS : (O) aanane aaanane | ig Me ON WO. OPN 0.50+0.03 i : 0.10 S L 040: 4OPIN ; 120: 120PIN P| = lL 40 050: SOPIN ; 140: 140PIN sit 060: 60PIN ; 160: 160PIN RECOMMEND SOLDER PCB LAYOUT 200: 200PIN we _2X%2.45 1.00 _ 7 ~ So m APH yo - _ r] a W Uy = _,| 1.60+0.16 0.72 iL = ~ 2 F ~ ma ~ = a AARAMAAnaae 2 ARAMA x i NI ' NZ | | | 2 . t co3oxo.so 0,550.03 a S| SL a10/ A] G of 0.807 YP -A- | 39 TOP SIDE BOTTOM SIDE RECOMMEND MATING CARD, THICKNESS=1.60+0.16MM GENERAL TOLERANCE +0.05MM PIN COUNT DIMENSION NOTE N (SIGNAL) A | B C | D E F G | H 1 MATERIAL: 20 17.30 13.30 9.80 7.20 3.40 11.20 9.65 3.40 HOUSING: HIGH TEMPERATURE THERMOPLASTIC BLACK UL94-V0 26 19.70 | 15.70 | 12.20 | 960 | 460 | 13.60 | 1205 | 4.60 CONTACT: COPPER ALLOY 40 25.30 | 21.30 | 17.80 | 15.20 | 7.40 | 19.20 | 17.65 | 7.40 BOARDLOCK: SPCC 50 29.30 | 25.30 | 2180 | 19.20 | 9.40 | 23.20 | 21.65 | 9.40 2. PLATING: CONTACT: MATING AREA: SEE PLATING SEPC OVER 1.27-2.54 UM NICKEL UNDERPLATED SOLDER AREA: 1.27 MIN TIN OVER 1.27-2.54 UM NICKEL UNDERPLATED TOLERANCES |__APPROVAL | DATE Amphenol BOARDLOCK: 1.27 MIN TIN OVER 1.27-2.54UM NICKEL UNDERPLATED U.S. METRIC | DRAWN Mar.13,2017 Dp 3. ELECTRICAL PERFORMANCE: xX 4/- 0.25 | CHECKED RATED CURRENT FOR POWER PIN: 20A/PIN Sox 100 O15 | ROVED RATED CURRENT FOR SIGNAL PIN: 0.5A/PIN FRACTIONS +/5 ; TITLE 4, PRODUCT SHALL MEET ALL DIMENSIONS BEFORE EXPOSURE TO 260C MAX. FOR 10S AND ANGLES +/ SY _PRAWING FILE: COOL EDGE CONNECTOR SHALL MEET ALL SELECTED FUNCTIONAL DIMENSION AFTER EXPOSURE TO 260C MAX. FOR 10S. SEE NOTES. | NTERNA\DRAWNE\Ce\ CEMA 101% 0.80MM PITCH 5. MATERIAL SHOULD BE FULFILLED AMPHENOL SPEC # SSN002 REMOVE SHARP EDGES ANGLE OF PROJECTION Sze DRAWAIG No ay 6. ORDERING PN: REFER TO THE PN SYSTEM DIMENSIONS Ss. NOHES AS C CE1XXXXX011011X (METRIC) (mm) SCALE | NONE | SHEET 1 OF 8 4 3 a 2 | 111.30 3.00 MY ot | (8g 2.20 2X2.45 S41 0.801 YP APH , 13,40, 2X1.10 DD - oa C 1.12 1.00 1.90 21.40 RECOMMENDED SOLDER PCB LAYOUT DD+0.05 | [0.10 GENERAL TOLERANCE +0.05 4 3 L 2 1 This di t is th rty of Amphenol Ci ti id is delivered the express condition that It Is not to be disclosed, reproduced or used, In REVISIONS whole or in part, for manufacture or sale by anyone other than Amphenol Ce ti ithout it i rt, & that ight i ted to discl or fo use any information In this document. nenghn 5 Srenmee se asese C U S Ty 0 M E R [) R A \W | \ G SYM ECN DESCRIPTION DATE APPROVED SEE SHEET 1 BB Cl 18.50 AA 1.40 (1.0) | 2.20 _ f.80 x 52] S40 _ $$$ \ $42 | T Ly I VA 1_| \ _ SOCTH OCT TPO CTA Oey fi wocrevocre eco eperevodreteeree Tr ry 0000000000 HGOO GOO F000 J 21.00 & U | i | Joos y | L swt UNLESS OTHERWISE SPECIFIED APPROVAL DATE A h | U.S. METRIC | DRAWN Mar.13,2017 mM Pp eno x +/- 0.25 | CHECKED XX +/- 0.20 | APPROVED XXX +/- 0.15 FRACTIONS +/7 TITLE ANGLES +/ 5 DRAWING FILE : FOR MATERIALS AND FINISHES INTERNAL\ DRAWING\ CE\.C CE1XXXXX011011X COOL EDGE CONNECTOR 0.80MM PITCH REMOVE SHARP EDGES ANGLE OF PROJECTION DIMENSIONS SIZE | DRAWING NO. REV. us INEHES: AS C CE1XXXXX011011X 1 (METRIC) (mm) SCALE | NONE | SHEET 2 OF 8 2 14 3 L 2 1 Te aoe ee sition Inet ills, not to. be, dlvolieed, sopteduccd on weeds th REVISIONS Sete hat Sil hl ne aPC a kal Re sul cen oISCRIPTION cae | appRoven or to use any Information In Is jocument. CUSTOMER DRAWING SEE SHEET 1 wl 1.60+0.16 Zz = L oO 1 Co t 1 39 | a Net \ = N 42 ||] 40 2 o = au AARAaaaaaneagaae || aaRaRRRAARRARARAARAAEREAAAAEEe S FAA AAA ALAR ABBA AAARCRAERe BBA AARAG RA AAAAAGe 2 TOTO Ro nore | || Woon Honan apcpepoponeeey CAAA : | , 1 1 NZ ) | \ | 4 a 1500.05 _] O.80TYP C0.30X0.50 lL _{[.0.55+0.03 180 oS Oa 7.80 <n |__ 22.20) 2.20 30 2 18.35+0.10 FE+0.10 BOTTOM SIDE TOP SIDE RECOMMENDED LAY OUT FOR MATING CARD, THICKNESS=1.60+0.16 GENERAL TOLERANCE +0,05 PIN COUNT DIMENSION N (SIGNAL) AA | BB | cc | DD | EE 60 10.50 | 36.50 | 32.50 | 30.40] 10.35 80 18.50 [44.50/40.50| 38.40] 18.35 100 26.50/52.50/48.50|46.40| 26.35 120 34.50] 60.50 | 56.50 154.40)34.35 UNLESS OTHERWISE SPECIFIED 140 42.50] 68.50 |64.50|62.40/42.35 TOLERANCES APPROVAL | DATE Amphenol U.S. METRIC | DRAWN Mar.13,2017 P 160 50.50] 76.50/72.50/70.40]50.35 CHECKED 180 58.50|84.50| 80.50 /78.40/58.35 Ye TE 0.20 | APPROVED XXX +/- 0.15 200 66.50] 92.50] 88.50/86.40] 66.35 FRACTIONS +/= TITLE ANGIES 4/- 5 _| DRAWING FILE : COOL EDGE CONNECTOR FOR MATERIALS AND FINISHES INTERNAL\DRAWING\CE\G CE1XXXXX011011X 0.80MM PITCH REMOVE SHARP EDGES ANGLE OF PROJECTION SIZE | DRAWING NO. REV. DIMENSIONS Ss. NOHES AS C CE1XXXXX011011X 1 (METRIC) (mm) SCALE | NONE | SHEET 3 OF 8 4 3 a 2 14 v 1 This document is the property of Amphenol Corporation and is delivered on the express condition that it is not to be disclosed, reproduced or used, In whole or in part, for manufacture or sale by anyone other than Amphenol Corporation without its prior concert, & that no right is granted to disclose or to use any information In this document. . C B A of 1.00 LOO ll) i}. (40 a aN ms 0.80TYP o | ps? co | I t f ~ HAO GHHO 0000000000 Ht sd ") i si Usiu-0 S ; S 9.10 4.60 11.30 _ 3.45 Lo 32 2.00 01.60 2X2.9 lL orm 2.30 & 2.30 CUSTOMER DRAWING 7.00 1.90 mou SECTION A-A SECTION B-B KGHL-G | EIS Pt 8.30 F+0 VYULU LY kG} , var , var map YAS toonanaannanananange oO} 5 st 0.502003 3 2X2.10 REVISIONS SYM ECN DESCRIPTION DATE APPROVED 1 N/A PRELIMINARY PROPOSAL Mar.08,2017 0.80TYP &% oS 2S So NN ! a) om = my oN P2. P. =< = se N KLALKIJZB CME&--S Ae HE St PIE PFAA tenn neot wean aeaeaene GY [ |010)P] 05 RECOMMEND SOLDER PCB LAYOUT GENERAL TOLERANCE +0.05MM UNLESS OTHERWISE SPECIFIED TOLERANCES U.S. METRIC XxX 4f/- 0.25 XX 4/- 0.20 XXX +/- 0.15 FRACTIONS +/ ANGLES +/- 5 APPROVAL DATE FOR MATERIALS AND FINISHES SEE NOTES INTERNAL\ DRAWING\CE\.GGE1XXXXX01101 1X REMOVE SHARP EDGES ANGLE OF PROJECTION DIMENSIONS s 4NEHES: (METRIC) (mm) DRAWN Mar.13,2017 At } Dp h e A O | CHECKED APPROVED TITLE DRAWING FILE : HYBRID COOL EDGE CONNECTOR 0.80MM PITCH SIZE | DRAWING NO. REV. AS| C CE1XXXXX011011X SCALE _| NONE | SHEET 4 OF 8 2 14 3 L 2 1 This document is the property of Amphenol Corporation and is delivered on the express condition that it is not to be disclosed, reproduced or used, In REVISIONS whole or in part, for manufacture or sale by anyone other than Amphenol Oo ee ae a tant en tn this: document ne right is granted te disclose C U S Ty 0 M E R [) R A \W | \ G SYM ECN DESCRIPTION DATE APPROVED SEE SHEET 1 ee a [| cee _ . _ ~ ~ a ~N HAO Ln 0.55 SJ} gy ; 7.00 |_| 00 Hh 1 e S O.80TYP T=1,.60+0.16 0.80TYP "| c=) 2 = Ty oe | ' Ln 7 NN | l\CfYYWZ Wwf] ||| ananassae Y va rapa rare ea PAPA ra raraparararararar KABA AAR YAARAAAAAAG ~ AAR BR ABABA BABE ZIZIZIZ 1212 ZIZIZIZIZIZIZIZIZIZI4 YOUU MMA | ne AaAAAAAAdaa AAAI AAAA AAA | hy | + 310 1552003 | fs aR 04S ~M C0.30X0.50 1.10+0.05 K+0.10 | J+0.10 39? BOTTOM SIDE |] TOP SIDE RECOMMEND MATING CARD, THICKNESS=1.60+0.16MM GENERAL TOLERANCE +0.05MM PIN COUNT DIMENSION PIN COUNT DIMENSION PIN COUNT DIMENSION N (POWER} | M (SIGNAL) A B C D E F G H J K N (POWER) | M (SIGNAL) A B C D E F G H J K N (POWER) | M (SIGNAL) A B C D E F G H J K 18 9.15 8.70 26.85 | 22.85 11.70 20.25 11.30 10.90 9.00 8.55 20 9.95 17.80 | 36.75 | 32.75 | 20.80 | 30.15 | 20.40 | 20.00 9.80 17.65 20 9.95 26.90 | 45.85 | 4185 | 29.90 | 39.25 | 29.50 | 29.10 9.80 26.75 20 9.95 8.70 27.65 | 23.65 11.70 21.05 11.30 10.90 9.80 8.55 40 17.95 17.80 | 44.75 | 40.75 | 20.80 | 38.15 | 20.40 | 20.00 | 17.80 | 17.65 40 17.95 | 26.90 | 53.85 | 49.85 | 29.90 | 47.25 | 29.50 | 29.10 | 17.80 | 26.75 40 17.95 8.70 35.65 | 31.65 11.70 29.05 11.30 10.90 17.80 8.55 60 25.95 | 17.80 | 52.75 | 48.75 | 20.80 | 46.15 | 20.40 | 20.00 | 25.80 | 17.65 60 25.95 | 26.90 | 61.85 | 57.85 | 29.90 | 55.25 | 29.50 | 29.10 | 25.80 | 26.75 60 25.95 8.70 43.65 | 39.65 11.70 37.05 11.30 10.90 | 25.80 8.55 80 33.95 | 17.80 | 60.75 | 56.75 | 20.80 | 54.15 | 20.40 | 20.00 | 33.80 | 17.65 80 33.95 | 26.90 | 69.85 | 65.85 | 29.90 | 63.25 | 29.50 | 29.10 | 33.80 | 26.75 80 33.95 8.70 51.65 | 47.65 | 11.70 | 45.05 11.30 10.90 | 33.80 8.55 iL, 100 41.95 | 17.80 | 68.75 | 64.75 | 20.80 | 6215 | 20.40 | 20.00 | 4180 | 17.65 6 100 41.95 | 26.90 | 77.85 | 73.85 | 29.90 | 7125 | 29.50 | 29.10 | 4180 | 26.75 2 100 41.95 8.70 59.65 | 55.65 11.70 53.05 11.30 10.90 | 41.80 8.55 120 49.95 | 17.80 | 76.75 | 72.75 | 20.80 | 70.15 | 20.40 | 20.00 | 49.80 | 17.65 120 49.95 | 26.90 | 85.85 | 8185 | 29.90 | 79.25 | 29.50 | 29.10 | 49.80 | 26.75 120 49.95 8.70 67.65 | 63.65 | 11.70 61.05 11.30 10.90 | 49.80 8.55 140 57.95 | 17.80 | 84.75 | 80.75 | 20.80 | 78.15 | 20.40 | 20.00 | 57.80 | 17.65 140 57.95 | 26.90 | 93.85 | 89.85 | 29.90 | 87.25 | 29.50 | 29.10 | 57.80 | 26.75 140 57.95 8.70 75.65 | 71.65 11.70 69.05 11.30 10.90 | 57.80 8.55 160 65.95 | 17.80 | 92.75 | 88.75 | 20.80 | 86.15 | 20.40 | 20.00 | 65.80 | 17.65 160 65.95 | 26.90 | 101.85 | 97.85 | 29.90 | 95.25 | 29.50 | 29.10 | 65.80 | 26.75 160 65.95 8.70 83.65 | 79.65 11.70 77.05 11.30 10.90 | 65.80 8.55 180 73.95 | 17.80 | 100.75 | 96.75 | 20.80 | 94.15 | 20.40 | 20.00 | 73.80 | 17.65 170 69.95 | 26.90 | 105.85 | 101.85 | 29.90 | 99.25 | 29.50 | 29.10 | 69.80 | 26.75 180 73.95 8.70 91.65 | 87.65 11.70 85.05 11.30 10.90 | 73.80 8.55 200 81.95 17.80 | 108.75 | 104.75 | 20.80 | 102.15 | 20.40 | 20.00 | 8180 | 17.65 200 81.95 8.70 99.65 | 95.65 11.70 93.05 11.30 10.90 81.80 8.55 ee TOLERANCES APPROVAL DATE A by | U.S. METRIC | DRAWN Mar.13,2017 mM P Eno x +/- 0.25 | CHECKED XX +f 0.20 APPROVED -XXX +/- 0.15 FRACTIONS +/7 TITLE ANGLES 4/7 5 _| ORAWING FILE : HYBRID COOL EDGE FOR MATERIALS AND FINISHES INTERNAL\DRAWING\CE\C CE1XXXXX011011X Cc O N N E CTO R 0 8 0 M M ) ITC H REMOVE SHARP EDGES ANGLE OF PROJECTION : SIZE | DRAWING NO. REV. DIMENSIONS 5. NOHES AS) C CE1XXXXX011011X 1 (METRIC) (mm) SCALE | NONE | SHEET 5 OF 8 4 3 a 2 14 3 L 2 1 This di t is th rty of Amphenol Ci ti id is delivered the express condition that It Is not to be disclosed, reproduced or used, In REVISIONS whole or in part, for manufacture or sale by anyone other than Amphenol Ce ti ithout it i rt, & that ight i ted to discl or fo use any information In this document. nenghn 5 Srenmee se asese C U S Ty 0 M E R [) R A \W | \ G SYM ECN DESCRIPTION DATE APPROVED 1 N/A PRELIMINARY PROPOSAL Mar.08,2017 E C D B A 1.00 1.00 1.4.0 (10) rc, 80TYP a 2 080TYP ps2 ph oO Yr f f yO S Ly io _ ai 3 peccanananaannetta 4 (IE = s Cj , HOGG GHHA GOH DOOD OOOO + (Ol v si S SY o - Ss . wy 9.10 4.60) 11.30 3.45 22 fl 4 == == == == == ==> [ee 7 ez] i 2X29 = E T | 1.90 WU H+0.05 0.50+0.03 = | o10[P] ~ RECOMMEND SOLDER PCB LAYOUT GENERAL TOLERANCE +0.05MM 61.60 SECTION A-A SECTION B-B 8.30 9.10 H J K a mn N So m & ~N a ee TOLERANCES APPROVAL DATE A rn | U.S. METRIC DRAWN Mar.13,2017 mM Dp e MN O x +/- 0.25 | CHECKED XX +f / 0.20 APPROVED XXX +/- 0.15 FRACTIONS +/7 TITLE ANGLES +/- 5 DRAWING FILE : HYBRID COOL EDGE FOR MATERIALS AND FINISHES INTERNAL\ DRAWING\ CE\C_GE1XXXXX011011X CO N N ECTO R 0 . 80 M M Pp ITC H REMOVE SHARP EDGES ANGLE OF PROJECTION DIMENSIONS SIZE | DRAWING NO. REV. os INEHES: AS) C CE1XXXXxX011011X 1 (METRIC) (mm) SCALE | NONE | SHEET 6 OF 8 4 3 a 2 14 3 L 2 1 the express condition that ll fo not Te. be disclosed, reproduced or used, 1h REVISIONS whole or in part, for manufacture or sale by anyone other than Amphenol Oo ee ae a tant en tn this: document ne right is granted te disclose C U S Ty 0 M E R [) R A \W | \ G SYM ECN DESCRIPTION DATE APPROVED SEE SHEET 1 D ie a oo a a oN aT oo Te, 3 750205 een @ @ @ 39,08 e310 120 eo 7 QS uy youd 0.55 & yi & S ee 7.00 won | too a | B ih CHOTYA || | s S , a3 28 Er Lo] tetos01e 4|_ ar |i 4 | | LZ LH = 7 |\ it. 0.55+0.03 | co 9.10 spo | 4S Lh. 0.45 |.1.100.05 _ ||. c0.30x0.50 Q+0.10 L+0.10 3 | 30? TOP SIDE BOTTOM SIDE RECOMMEND MATING CARD, THICKNESS=1.60+0.16MM GENERAL TOLERANCE +0.05MM UNLESS OTHERWISE SPECIFIED APPROVAL DATE TOLERANCES X +/- XX +f XXX +/- METRIC 0.25 0.20 U.S. 0.15 DRAWN Mar.13,2017 CHECKED APPROVED Amphenol FRACTIONS t+/5 ANGLES +/- S TITLE FOR MATERIALS AND FINISHES SEE NOTES DRAWING FILE : INTERNAL\ DRAWING\CE\.GGE1XXXXX01101 1X REMOVE SHARP EDGES HYBRID COOL EDGE CONNECTOR 0.80MM PITCH ANGLE OF PROJECTION SIZE | DRAWING NO. REV. DIMENSIONS Ss. NOHES AS C CE1XXXXX011011X 1 (METRIC) (mm) SCALE | NONE | SHEET 7 OF 8 2 14 b 2 1 the express conaifon that ii Is not To. be. disclosed, reproduced er used, Tn REVISIONS Corporation without tts prior concert, & that no ight is granted to disclose or to use any information In this document. C U S | 0 M E R [) R A \W | \ G SYM ECN DESCRIPTION DATE APPROVED SEE SHEET 1 PIN COUNT DIMENSION PIN COUNT DIMENSION N (POWER) | M (SIGNAL) A B C D E F G H J K L Q N (POWER) | M (SIGNAL) A B D EF F G Hi j K L 0 9.15 8.70 13.20 | 13.65 | 37.85 | 33.85 | 17.20 | 20.25 | 11.30 | 10.90 9.00 8.55 18 20 9.95 17.80 | 22.30 | 14.45 | 47.75 | 43.75 | 26.30 | 30.15 | 20.40 | 20.00 9.80 17.65 9.95 8.70 13.20 | 14.45 | 38.65 | 34.65 | 17.20 | 2105 | 11.30 | 10.90 9.80 8.55 20 40 17.95 | 17.80 | 22.30 | 22.45 | 55.75 | 51.75 | 26.30 | 38.15 | 2040 | 20.00 | 17.80 | 17.65 17.95 8.70 13.20 | 22.45 | 46.65 | 42.65 | 17.20 | 29.05 | 11.30 | 10.90 | 17.80 | 855 0 60 25.95 | 17.80 | 22.30 | 30.45 | 63.75 | 59.75 | 26.30 | 46.15 | 20.40 | 20.00 | 25.80 | 17.65 25.95 | 8.70 13.20 | 30.45 | 54.65 | 50.65 | 17.20 | 37.05 | 11.30 | 10.90 | 25.80 | 855 60 80 33.95 | 17.80 | 22.30 | 38.45 | 71.75 | 67.75 | 26.30 | 54.15 | 20.40 | 20.00 | 33.80 | 17.65 33.95 8.70 13.20 | 38.45 | 62.65 | 58.65 | 17.20 | 45.05 | 11.30 | 10.90 | 33.80 | 8.55 80 100 41.95 | 17.80 | 22.30 | 46.45 | 79.75 | 75.75 | 26.30 | 62.15 | 20.40 | 20.00 | 41.80 | 17.65 2 100 41.95 8.70 13.20 | 46.45 | 70.65 | 66.65 | 17.20 | 53.05 | 11.30 | 10.90 | 4180 8.55 4 120 49.95 | 17.80 | 22.30 | 54.45 | 87.75 | 83.75 | 26.30 | 70.15 | 2040 | 20.00 | 49.80 | 17.65 49.95 | 8.70 13.20 | 54.45 | 78.65 | 74.65 | 17.20 | 61.05 | 11.30 | 10.90 | 49.80 | 855 120 140 57.95 | 17.80 | 22.30 | 6245 | 95.75 | 91.75 | 26.30 | 78.15 | 20.40 | 20.00 | 57.80 | 17.65 57,95 | 8.70 13.20 | 62.45 | 86.65 | 82.65 | 17.20 | 69.05 | 11.30 | 10.90 | 57.80 | 855 140 160 65.95 | 17.80 | 22.30 | 70.45 | 103.75 | 99.75 | 26.30 | 86.15 | 20.40 | 20.00 | 65.80 | 17.65 65.95 | 8.70 13.20 | 70.45 | 94.65 | 90.65 | 17.20 | 77.05 | 11.30 | 10.90 | 65.80 | 855 160 180 73.95 | 17.80 | 22.30 | 78.45 | 111.75 | 107.75 | 26.30 | 94.15 | 20.40 | 20.00 | 73.80 | 17.65 73.95 8.70 13.20 | 78.45 | 102.65 | 98.65 | 17.20 | 85.05 | 11.30 | 10.90 | 73.80 | 8.55 180 200 81.95 | 17.80 | 22.30 | 86.45 | 119.75 | 115.75 | 26.30 | 102.15 | 20.40 | 20.00 | 81.80 | 17.65 200 81.95 8.70 13.20 | 86.45 | 110.65 | 106.65 | 17.20 | 93.05 | 1130 | 10.90 | 81.80 8.55 PIN COUNT DIMENSION N (POWER) | M (SIGNAL) A B C D E F G H J K L Q 20 9.95 26.90 | 3140 | 14.45 | 56.85 | 52.85 | 35.40 | 39.25 | 2950 | 29.10 9.80 | 26.75 40 17.95 | 26.90 | 3140 | 22.45 | 64.85 | 60.85 | 35.40 | 47.25 | 29.50 | 29.10 | 17.80 | 26.75 60 25.95 | 26.90 | 3140 | 30.45 | 72.85 | 68.85 | 35.40 | 55.25 | 29.50 | 29.10 | 25.80 | 26.75 80 33.95 | 26.90 | 3140 | 38.45 | 80.85 | 76.85 | 35.40 | 63.25 | 29.50 | 29.10 | 33.80 | 26.75 6 100 41,95 | 26.90 | 3140 | 46.45 | 88.85 | 84.85 | 35.40 | 71.25 | 29.50 | 29.10 | 41.80 | 26.75 120 49.95 | 26.90 | 3140 | 54.45 | 96.85 | 92.85 | 35.40 | 79.25 | 29.50 | 2910 | 49.80 | 26.75 140 57.95 | 26.90 | 3140 | 62.45 | 104.85 | 10085 | 35.40 | 87.25 | 29.50 | 29.10 | 57.80 | 26.75 160 65.95 | 26.90 | 3140 | 70.45 | 112.85 | 108.85 | 35.40 | 95.25 | 29.50 | 29.10 | 65.80 | 26.75 170 69.95 | 26.90 | 3140 | 74.45 | 120.85 | 112.85 | 35.40 | 99.25 | 29.50 | 29.10 | 69.80 | 26.75 ee TOLERANCES APPROVAL DATE A a | U.S. METRIC | DRAWN Mar.13,2017 mM P Eno x +/- 0.25 | CHECKED XX +f 0.20 APPROVED XXX +/ 0.15 FRACTIONS +/7 TITLE ANGLES +/- S| DRAWING FILE : HYBRID COOL EDGE FOR MATERIALS AND FINISHES SEE NOTES INTERNAL\DRAWING\CE\C CE1XXXXX011011X CO N N ECTO R 0 80 M M ) ITC H REMOVE SHARP EDGES ANGLE OF PROJECTION : SIZE | DRAWING NO. REV. DIMENSIONS Ss NOHES AS) C CE1XXXXX011011X 1 (METRIC) (mm) SCALE | NONE | SHEET 8 OF 8 4 3 2 1