D10040200GTH - Premier Devices, Inc.

Product Specification

D10040200GTH

GaAs Power Doubler, 40 – 1000MHz, 20.0dB min. Gain @ 1GHz, High, 440mA max. @ 24VDC

FEATURES

D10040200GTH

GaAs Power Doubler Hybrid

High Output Capability

40 – 1000MHz

20.0dB min. Gain @ 1GHz

440mA max. @ 24VDC

• Excellent linearity

• Superior return loss performance

• Extremely low distortion

• Optimal reliability

• Low noise

• Unconditionally stable under all terminations

• High output capabilit y

APPLICATION

• 40 to 1000 MHz CATV amplifier systems

DESCRIPTION

• Hybrid Power Doubler amplifier module with high

output capability employing GaAs dice

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134)

SYMBOL PARAMETER MIN. MAX. UNIT

Vi RF input voltage (single tone) - 75 dBmV

Vov DC supply over-voltage (5 minutes) - 30 V

Tstg storage temperature - 40 + 100 °C

Tmb operating mounting base temperature - 30 + 100 °C

CHARACTERISTICS

Table 1: S-Parameter, Noise Figure, DC Current; VB = 24V; Tmb = 30°C; ZS = ZL = 75 Ω

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

Gp power gain f = 50 MHz 19.5 20.0 20.5 dB

f = 1000 MHz 20.0 22 dB

SL slope

1) f = 40 to 1000 MHz 1.0 1.5 2.0 dB

FL flatness of frequency

response f = 40 to 1000 MHz

(Peak to Valley) - 0.8 dB

f = 40 to 320 MHz 20.0 - dB

f = 320 to 640 MHz 19.0 - dB

f = 640 to 870 MHz 17.0 - dB

S11 input return loss

f = 870 to 1000 MHz 16.0 - dB

f = 40 to 320 MHz 20.0 - dB

f = 320 to 640 MHz 19.0 - dB

f = 640 to 870 MHz 18.0 - dB

S22 output return loss

f = 870 to 1000 MHz 17.0 - dB

F noise figure f = 50 to 1000 MHz - 6.5 dB

Itot total current

consumption (DC) 420.0 440.0 mA

Notes:

1) The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.

Page 1 of 4 2005 Jan 11 Document Revision Level A

Product Specification

D10040200GTH

GaAs Power Doubler, 40 – 1000MHz, 20.0dB min. Gain @ 1GHz, High, 440mA max. @ 24VDC

CHARACTERISTICS

Table 2: Distortion data 40 – 550 MHz; VB = 24V; Tmb = 30°C; ZS = ZL = 75 Ω

SYMBOL CONDITIONS MIN. TYP. MAX. UNIT

CTB 79 ch. 7 dB tilted; Vo = 52 dBmV @ 550 MHz; 1) - - 65 - 63

dBc

XMOD 79 ch. 7 dB tilted; Vo = 52 dBmV @ 550 MHz; 1) - - 62

- 60 dBc

CSO 79 ch. 7 dB tilted; Vo = 52 dBmV @ 550 MHz; 1) -

-67 -65 dBc

Notes:

1) 79 channels, NTSC frequency raster: 55.25 MHz to 547.25 MHz, +45 dBmV to +52 dBmV tilted output level.

Composite Second Order (CSO)

The CSO parameter (both sum and difference products) is defined by the NCTA.

Composite Triple Beat (CTB)

The CTB parameter is defined by the NCTA.

Cross Modulation (XMOD)

Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the

carrier being tested.

Page 2 of 4 2005 Jan 11 Document Revision Level A

Product Specification

D10040200GTH

GaAs Power Doubler, 40 – 1000MHz, 20.0dB min. Gain @ 1GHz, High, 440mA max. @ 24VDC

123456789

INPUT

GND

+VB

GND

OUTPUT

Pinning:

min max

A44,4

B13,4

C19,9

D 7,85 8,15

E 12,45 12,75

F37,9

G 3,95 4,2

H3,8

I25,2

J-

K4,0

L27,0

M11,1

N5,4

O 0,23 0,27

P 0,42 0,48

Q 2,24 2,84

R 2,04 3,04

S 2,29 2,79

T 4,83 5,33

U 4,83 5,33

nominal

44,6

±0,2

13,6

±0,2

20,4

±0,5

±0,15

12,6

±0,15

38,1

±0,2

25,4

±0,2

+0,2 / -0,05

UNC 6-32

4,2

±0,2

27,2

±0,2

11,6

±0,5

5,8

±0,4

0,25

±0,02

0,45

±0,03

2,54

±0,3

2,54

±0,5

2,54

±0,25

5,08

±0,25

5,08

±0,25

44,8

13,8

20,9

38,3

4,2

25,6

4,4

27,4

12,1

6,2

All Dimensions in mm:

European

Projection

Notes:

510mm0

scale

123 5 789

510mm0

scale

Page 3 of 4 2005 Jan 11 Document Revision Level A

Product Specification

D10040200GTH

GaAs Power Doubler, 40 – 1000MHz, 20.0dB min. Gain @ 1GHz, High, 440mA max. @ 24VDC

DEFINITIONS

Data Sheet Status

Objective Product

Specification This data sheet contains target or goal specifications for product

development.

Preliminary Product

Specification This data sheet contains preliminary data; suppleme ntary data may

be published later.

Product Specification This data sheet contains final product specifications.

Limiting values

Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134).

Stress above one or more of the limiting values may cause permanent damage to the device.

These are stress ratings only and operation of the device at these or at any other conditions

above those given in the Characteristics sections of the specifi cati on is not implied. Exposure to

limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and doe s not form part of the specification.

Premier Devices reserves the right to make changes without further notice to any products herein.

Premier Devices makes no warranty representation or guarantee regarding the suitability of its products for any particular

purpose, nor does Premier Devices assume any liability arising out of the application or use of any product or circuit, and

specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical”

parameters which may be provided in Premier Devices datasheets and/or specifications can and do vary in different

applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated

for each customer application by customer´s technical experts. Premier Devices does not convey any license under its

patent rights nor the rights of others. Premier Devices products are not designed, intended, or authorized for use as

components in systems intended for surgical implant into the body, or other applications intended to support or sustain

life, or for any other application in which the failure of the Premier Devices product could create a situation where personal

injury or death may occur. Should Buyer purchase or use Premier Devices products for any such unintended or

unauthorized application, Buyer shall indemnify and hold Premier Devices and its officers, employees, subsidiaries,

affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees

arising out of, directly or indirectly, and claim of personal injury or death associated with such unintended or unauthorized

use, even if such claim alleges that Premier Devices was negligent regarding the design or manufacture of the part.

How to contact us:

Premier Devices Germany GmbH

Loeffelholzstrasse 20, D-90441 Nuernberg, Germany

Phone: +49 (0) 911 9411 233, FAX: +49 (0) 911 94 11 198,

Email: sales.germany@premierdevices.com, Internet: http://www.premierdevices.de/

Page 4 of 4 2005 Jan 11 Document Revision Level A