Display Through-hole ELD-306SURWA/S530-A3 Features * Industrial standard size. * Low power consumption. * Categorized for luminous intensity. * Pb free and RoHS compliant. Description * The ELD-306SURWA/S530-A3 is a 7.62mm (0.3") digit height seven-segment display. * The display provides excellent reliability in bright ambient light. * The device is made with white segments and gray surface. Applications * Home appliances * Instrument panels * Digital readout displays 1 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Mar. 21, 2013 Issue No : DDF-0001608 Rev.1 www.everlight.com DATASHEET Display Through-hole ELD-306SURWA/S530-A3 Device Selection Guide Chip Materials Emitted Color Resin Color AlGaInP Brilliant Red White Diffusion Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit VR 5 V IF 25 mA IFP 60 mA Power Dissipation Pd 60 mW Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +100 Tsol 260 Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Soldering Temperature (Soldering time 5 seconds) Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 4.0 6.4 ----- mcd IF=10mA Peak Wavelength p ----- 632 ----- nm IF=20mA Dominant Wavelength d ----- 624 ----- nm IF=20mA Spectrum Radiation Bandwidth ----- 20 ----- nm IF=20mA Forward Voltage VF ----- 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- 100 A VR=5V *1 Note: 1. Luminous Intensity is a average value which is measured one 7-segment. 2. Tolerance of Luminous Intensity: 10 3. Tolerance of Forward Voltage: 0.1V 2 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Mar. 21, 2013 Issue No : DDF-0001608 Rev.1 www.everlight.com DATASHEET Display Through-hole ELD-306SURWA/S530-A3 Typical Electro-Optical Characteristics Curves ) Spectrum Distribution (Ta=25 ) Forward Current vs. Forward Voltage (Ta=25 Forward Current (mA) Relative luminous intensity ( ) Wavelength p (nm) Forward Voltage (V) Forward Current (mA) Forward Current Derating Curve Ambient Temperature (C ) 3 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Mar. 21, 2013 Issue No : DDF-0001608 Rev.1 www.everlight.com DATASHEET Display Through-hole ELD-306SURWA/S530-A3 Package Dimension & Internal Circuit Diagram Note: Tolerances unless mentioned 0.25mm. Unit = mm 4 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Mar. 21, 2013 Issue No : DDF-0001608 Rev.1 www.everlight.com DATASHEET Display Through-hole ELD-306SURWA/S530-A3 Packing Materials Label Explanation D306SURWA/S530-A3 CPN: Customer's Product Number P/N: Product Number QTY: Packing Quantity CAT: Luminous Intensity Rank HUE: Reference REF: Reference LOT No: Lot Number REFERENCE: Volume Label code Packing Process 32PCS/Plate 5 64Plates/Box 4Boxes/Carton Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Mar. 21, 2013 Issue No : DDF-0001608 Rev.1 www.everlight.com DATASHEET Display Through-hole ELD-306SURWA/S530-A3 Application Restrictions 1. Specification described in this document. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT Corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 4. ESD (Electrostatic Discharge) The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability. When handling the products, the following measures against electrostatic discharge are strongly recommended: Eliminating the charge Grounded wrist strap, ESD footwear, clothes, and floors Grounded workstation equipment and tools ESD table/shelf mat made of conductive materials Proper grounding is required for all devices, equipment, and machinery used in product assembly. Surge protection should be considered when designing of commercial products. If tools or equipment contain insulating materials such as glass or plastic, the following measures against electrostatic discharge are strongly recommended: Dissipating static charge with conductive materials Preventing charge generation with moisture Neutralizing the charge with ionizers 6 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Mar. 21, 2013 Issue No : DDF-0001608 Rev.1 www.everlight.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Everlight: D306SURWA/S530-A3