Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Electric Double Layer Capacitors (Gold Capacitor)/ SE
– EEC-11 –
P0fD0
P1F
P2P
5.4±0.8
fd
H1
13.4 max.
H0
WW1
W2
W0
#h
–+–+
#h1
10.5 max.
■ Features
● Endurance : 70 °C 1000 h
● –
40 °C guarantee
● Automatic insertion available
● RoHS directive compliant
Stacked Coin Type
Series: SE
■ Speci cations
Category Temp. Range –40 °C to +70 °C
Maximum Operating Voltage 5.5 V.DC
Nominal Cap.Range 0.22 F
Characteristics at Low
Temperature
Capacitance change ±30 % of initial measured value at +20 °C (at –40 °C)
Internal resistance <7 times of initial measured value at +20 °C (at –40 °C)
Endurance
After 1000 hours application of 5.5 V. DC at +70 °C, the capacitor shall meet the following limits.
Capacitance change ±30 % of initial measured value
Internal resistance <4 times of initial specifi ed value
Shelf Life After 1000 hours storage at +70 °C without load, the capacitor shall meet the specifi ed
limits for Endurance.
■ Di men sions in mm(not to scale)
■ Recommended Applications
● Memory back-up for video and audio equipment,
cameras, tele phones, printers, data terminals,
rice cookers and intelligent remote controls.
+0.8
–0.2
Dimensions Nominal Tolerance
0d 0.55 ±0.05
P0 12.7 ±0.2
F 5.0
W 18.0 ±0.5
W05.5<–
W19.0 ±0.5
W20 to 3.0 –
H016.4 ±0.5
0D04.0 ±0.2
P 12.7 ±1.0
P13.85 ±0.50
P26.35 ±1.00
Δh, Δh10 ±1.0
H130.3>–
Note: 1. When ordering please observe the minimum packaging quantity.
2. When the surface mount component goes through UV or a heat oven to affi x the adhesive glue, the capacitor’s surface
temperature should not exceed 100 °C for more than 60 seconds (maximum tem per a ture should not exceed 105 °C)
3. Do not use refl ow soldering. (IR, Atmosphere heating methods, etc.)
Please refer to the page of “Application Guidelines”.
(Unit : mm)
■ Standard Products
Maximum
Op er at ing
Volt age
Capacitance
Capacitance
tolerance
Internal resistance
(Initial specifi ed value)
Recommended
discharge current
Part number
Mass
(Reference value)
Min.
Packaging
Q’ty
(V.DC) (F) (F) (Ω) at 1kHz (μA) (g) (pcs)
5.5 0.22 0.176 to 0.396 <
75 300 or less EECSE0H224N 1.0 1000
00 Oct. 2014
