Channel programming By GAP 1605
Channel assignment 1 pair of channels, freely
programmable
I/O number 1 Water detection
I/O number 2 Always ON*
Environment
Degree of protection IP 67
Operating temperature -20 to +50°C (-4 to +122°F)
Storage temperature -50 to +85°C (-58 to +185°F)
Mechanical resistance
Shock 15 G (11 ms)
Vibration 2 G (6 to 55 Hz)
Specifications are subject to change without notice (02.11.2004) 1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description Ordering Key
Type: Dupline®
Sensor
Transmitter
2 Channels
1 Input
WaterStop®sensor
Water Detection Sensor
Type G 8910 2116
• 2-channel transmitter
• Integrated water sensor input
• Channel coding by GAP 1605
• Water resistant PCB with screw terminals
• Easily mountable with unique mounting bracket
• Supplied by Dupline®
• External input for Felson moisture cable
Dupline®transmitter, designed
to be a part of the Dupline®
WaterStop®concept for
residential buildings. When
mounted correctly on the
unique mounting bracket,
the sensor detects water on
the floor directly or by an
external sensor in the under
floor heating installation, and
signals the status to the
Mastergenerator or Water-
Stop®kit.
When using the external
sensor both the internal and
external input responds to the
same Dupline®channel.
Supply Ordering no.
By Dupline®G 8910 2116
Supply Specifications
Power supply Supplied by Dupline®
Rated operational current typ. 800 µA
Type Selection
General Specifications
G 8910 2116
Connection
Screw terminal D+ : Dupline® +
D- : Dupline® -
Connection f. external
“Felson”sensor
Screw terminal Pin X & X
Housing
Material Housing ABS
Color White
Dimensions (H x W x D) 70 x 40 x 16 mm
Weight 100g
Mounting Direct wall mounting
Input Specifications
Input 1 integrated water sensor in
parallel with screw terminals
for external sensor
Open loop voltage < 8.0 VDC
Trigger resistance 150 – 470 KΩ
Response time ≤156 ms @ 128 channels
* Only when using WaterStop®