ATC 800 E Series NPO Ceramic High RF Power Multilayer Capacitors * Case E Size * Capacitance Range: (.380" x .380") 3.3 pF to 5100 pF * High Q * Ultra-Stable Performance * Ultra Low ESR * High RF Current/Voltage * High RF Power * High Reliability * 7200 WVDC * RoHS Compliant, Pb free ATC's 800 E Series offers superb performance in demanding high RF power applications requiring consistent and reliable operation. The combination of highly conductive metal electrode systems, optimized case geometries, and proprietary dielectrics, yields the lowest ESR. ATC's new NPO low loss rugged dielectrics are designed to provide superior heat transfer in high RF power applications. Ultra-low ESR and superior thermal performance ensure that the 800 E Series products are your best choice for high RF power applications from VHF through microwave frequencies. Typical functional applications: Bypass, Coupling, Tuning, Impedance Matching and DC Blocking Typical circuit applications: HF/RF Power Amplifiers, Transmitters, Antenna Tuning, Plasma Chambers and Medical (MRI coils). ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): Greater than 5,000 (3.3 pF to 1000 pF) @ 1 MHz. Greater than 5,000 (1100 pF to 5100 pF) @ 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): 0 30 PPM/C (-55C to +125C) INSULATION RESISTANCE (IR): 105 Megohms min. @ +25C at rated WVDC 104 Megohms min. @ +125C at rated WVDC Max. test voltage is 500 VDC. WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2 DIELECTRIC WITHSTANDING VOLTAGE (DWV): 120% of WVDC for 5 seconds.. ENVIRONMENTAL TESTS ATC 800 E Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A RETRACE: Less than (0.02% or 0.02 pF), whichever is greater AGING EFFECTS: None PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure) CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater MOISTURE RESISTANCE: MIL-STD-202, Method 106 OPERATING TEMPERATURE RANGE: From -55C to +125C LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. TERMINATION STYLE: See Mechanical Configurations, page 3 LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125C. Voltage applied. TERMINAL STRENGTH: Terminations for chips withstand a pull of 10 lbs. min., 25 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. 120% of WVDC for capacitors rated at 1250 volts DC or less. 100% of WVDC for capacitors rated above 1250 volts DC American Technical THE ENGINEERS' CHOICE (R) Ceramics w w w. a t c e r a m i c s . c o m ATC # 001-1077 Rev. P, 1/18 ATC 800 E Capacitance Values 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 200 220 240 270 300 330 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 360 390 430 470 510 560 620 680 750 820 910 101 111 121 131 151 161 181 201 221 241 271 301 331 361 B, C, D 7200 F, G, J, K 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 391 431 471 511 561 621 681 751 821 911 102 112 122 132 152 162 182 202 222 242 272 302 332 392 472 512 7200 F, G, J, K 3600 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3900 4700 5100 3600 F, G, J, K 2500 G, J, K 2000 VRMS = 0.707 X WVDC SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY. CAPACITANCE TOLERANCE J B C D F G K Code Tol. 0.1 pF 0.25 pF 0.5 pF 1% 2% 5% 10% ATC PART NUMBER CODE ATC800 E 22 0 J TN 7200 X C Series Packaging C - ATC Matrix Tray (Standard) T - Tape and Reel, 250 pc. qty. I - Special Packaging (Consult Factory) Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. Laser Marking Capacitance Tolerance Termination Code WVDC The above part number refers to a 800 E Series (case size E) 22 pF capacitor, J tolerance (5%), 7200 WVDC, with TN termination (Tin Plated over Non-Magnetic Barrier Termination), laser marking and plastic Matrix Tray packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N ATC North America sales@atceramics.com 2 For additional information and catalogs contact your ATC representative or call direct at (631) 622-4700. Consult factory for additional performance data. T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 800 E Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE 800 E ATC CASE SIZE TERM. & TYPECASE SIZE CODE & TYPE W/T IS A TERMINATION SURFACE L T WL W Microstrip L E 800 E LL W L Axial Ribbon E 800 E T TL WL AR THICKNESS (T) OVERLAP (Y) MATERIALS Tin Plated over Nickel Barrier Termination T High Purity Silver Leads .380 +.015 -.010 .190 (4.83) (9.65 max. .380 +.035 -.010 +0.38 -0.25) (9.65 +0.89 -0.25) LL = .750 (19.05) min. WL = .350 .010 (8.89 0.25) TL = .010 .005 (0.25 0.13) Leads are Attached with High Temperature Solder N/A. Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 2.25 (57.2) min. LL * W AW L Axial Wire RoHS Compliant .040 (1.02) max. TL LL MS WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS .380 +.015 -.010 (9.65 +0.38 -0.25) W E 800 E LENGTH (L) Y E Solderable Nickel Barrier T BODY DIMENSIONS INCHES (mm) OUTLINES T Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. ATC 800 E Non-Magnetic Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE BODY DIMENSIONS INCHES (mm) OUTLINES CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) .380 +.015 -.010 (9.65 +0.38 -0.25) Y 800 E TN E W Non-Mag Solderable Barrier L T E 800 E WL W Non-Mag Microstrip L T E 800 E WL W Non-Mag Axial Ribbon E 800 E TL LL AN THICKNESS (T) OVERLAP (Y) L RoHS Compliant .040 (1.02) max. Tin Plated over Non-Magnetic Barrier Termination T High Purity Silver Leads .380 +.015 -.010 .190 (4.83) max. (9.65 .380 +.035 -.010 +0.38 -0.25) (9.65 +0.89 -0.25) BN W L LL = .750 (19.05) min. WL = .350 .010 (8.89 0.25) TL = .010 .005 (0.25 0.13) Leads are Attached with High Temperature Solder. N/A. Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 2.25 (57.2) min. LL Non-Mag Axial Wire MATERIALS TL LL MN WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS * T Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. ATC 800 E Capacitors: Suggested Mounting Pad Dimensions T L W L W 2 J 220J 0 2 T Case E Pad Size Horizontal Electrode Orientation Vertical Electrode Orientation B Vertical Mount B Horizontal Mount A C A Min. B Min. C Min. D Min. Normal .205 .050 .325 .425 High Density .185 .030 .325 .385 Normal .405 .050 .325 .425 High Density .385 .030 .325 .385 Dimensions are in inches. D A M E R I C A N ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 3 ATC 800 E Performance Data 800 E ESR 100 10 pF 12 pF 22 pF ESR () 47 pF 220 pF 330 pF 10 560 pF 750 pF 5100 pF ESR (MilliOhms) 1 1 10 100 (MHz) 1000 800 E 10000 (MHz) 1000 100 ATC700E 800 E () 10 1 10 100 1000 (pF) A M E R I C A N ATC North America sales@atceramics.com 4 T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 10000 ATC 800 E Performance Data 800 E 100 65C 12C/W5W 125C (A) 10 30 MHz 2 MHz 10 MHz 1 Dotted line = Power dissipation limit = Solid line = Voltage limit (Vrms/Xc) = () 0 1 10 100 1000 10000 (pF) 800 E 1 (TCC) = 0 30 PPM/C 0.8 0.6 % 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1 -55 -35 -15 5 25 45 (C) 65 85 105 125 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/ productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 2010 American Technical Ceramics Corp. All Rights Reserved A M E R I C A N ATC North America sales@atceramics.com ATC # 001-1077 Rev. P, 1/18 T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: American Technical Ceramics (ATC): 800E101JTN7200XT 800E102GT2500XT 800E120GTN7200XT 800E150GTN7200XT 800E152GT2500XT 800E330GTN7200XT 800E470GTN7200XT 800E512JT2000XT 800E560GTN7200X 800E560JT7200XT 800E680GTN7200XT 800E820JTN7200XT 800E8R2CT7200XT