800E512JT2000XT - American Technical Ceramics (ATC)

ATC 800 E Series

NPO Ceramic

High RF Power Multilayer

Capacitors

• Case E Size • Capacitance Range:

(.380" x .380") 3.3 pF to 5100 pF

• High Q • Ultra-Stable Performance

• Ultra Low ESR • High RF Current/Voltage

• High RF Power • High Reliability

• 7200 WVDC • RoHS Compliant, Pb free

ATC’s 800 E Series offers superb performance in demanding high RF

power applications requiring consistent and reliable operation. The

combination of highly conductive metal electrode systems, optimized

case geometries, and proprietary dielectrics, yields the lowest ESR.

ATC’s new NPO low loss rugged dielectrics are designed to provide

superior heat transfer in high RF power applications. Ultra-low ESR

and superior thermal performance ensure that the 800 E Series

products are your best choice for high RF power applications from

VHF through microwave frequencies.

Typical functional applications: Bypass, Coupling, Tuning, Impedance

Matching and DC Blocking

Typical circuit applications: HF/RF Power Amplifiers, Transmitters,

Antenna Tuning, Plasma Chambers and Medical (MRI coils).

ENVIRONMENTAL TESTS

ATC 800 E Series Capacitors are designed and manufactured to

meet and exceed the requirements of EIA-198, MIL-PRF-55681 and

MIL-PRF-123.

THERMAL SHOCK:

MIL-STD-202, Method 107, Condition A

MOISTURE RESISTANCE:

MIL-STD-202, Method 106

LOW VOLTAGE HUMIDITY:

MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied

while subjected to an environment of 85°C with 85% relative

humidity for 240 hours min.

LIFE TEST:

MIL-STD-202, Method 108, for 2000 hours, at 125°C.

Voltage applied.

120% of WVDC for capacitors rated at 1250 volts DC or less.

100% of WVDC for capacitors rated above 1250 volts DC

ELECTRICAL AND MECHANICAL

SPECIFICATIONS

QUALITY FACTOR (Q):

Greater than 5,000 (3.3 pF to 1000 pF) @ 1 MHz.

Greater than 5,000 (1100 pF to 5100 pF) @ 1 KHz.

TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):

0 ±30 PPM/°C (-55°C to +125°C)

INSULATION RESISTANCE (IR):

105 Megohms min. @ +25°C at rated WVDC

104 Megohms min. @ +125°C at rated WVDC

Max. test voltage is 500 VDC.

WORKING VOLTAGE (WVDC):

See Capacitance Values Table, page 2

DIELECTRIC WITHSTANDING VOLTAGE (DWV):

120% of WVDC for 5 seconds..

RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater

AGING EFFECTS: None

PIEZOELECTRIC EFFECTS: None

(No capacitance variation with voltage or pressure)

CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is greater

OPERATING TEMPERATURE RANGE:

From -55°C to +125°C

TERMINATION STYLE:

See Mechanical Configurations, page 3

TERMINAL STRENGTH: Terminations for chips withstand a pull of 10

lbs. min., 25 lbs. typical, for 5 seconds in direction perpendicular

to the termination surface of the capacitor. Test per MIL-STD-202,

method 211.

THE ENGINEERS’ CHOICE® www.atceramics.com

American Technical Ceramics

ATC # 001-1077 Rev. P, 1/18

ATC PART NUMBER CODE

ATC800 E 22 0 J TN 7200 X C

Series

Case Size

Capacitance Code:

First 2 significant digits for capacitance.

R=Decimal Point

Indicates number of zeros following digits Laser Marking

of capacitance in picofarads except for decimal values.

Capacitance Tolerance

WVDC

Termination Code

Packaging

C - ATC Matrix Tray (Standard)

T - Tape and Reel, 250 pc. qty.

I - Special Packaging (Consult Factory)

ATC 800 E Capacitance Values

The above part number refers to a 800 E Series (case size E) 22 pF capacitor, J tolerance (±5%), 7200 WVDC,

with TN termination (Tin Plated over Non-Magnetic Barrier Termination), laser marking and plastic Matrix Tray packaging.

For additional information and catalogs contact your ATC

representative or call direct at (631) 622-4700.

Consult factory for additional performance data.

ATC accepts orders for our parts using designations with or without the

“ATC” prefix. Both methods of defining the part number are equivalent, i.e.,

part numbers referenced with the “ATC” prefix are interchangeable to parts

referenced without the “ATC” prefix. Customers are free to use either in

specifying or procuring parts from American Technical Ceramics.

CAPACITANCE TOLERANCE

Code B C D F G JK

Tol. ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10%

3R3 3.3

B, C, D

7200

360 36

F, G, J, K

7200

391 390

F, G, J, K

3600

3R6 3.6 390 39 431 430

3R9

3.9 430 43 471 470

4R3 4.3 470 47 511 510

4R7 4.7 510 51 561 560

5R1 5.1 560 56 621 620

2500

5R6 5.6 620 62 681 680

6R2 6.2 680 68 751 750

6R8 6.8 750 75 821 820

7R5 7.5 820 82 911 910

8R2 8.2 910 91 102 1000

9R1 9.1 101 100 112 1100

100 10

F, G, J, K

111 110

3600

122 1200

110 11 121 120 132 1300

120 12 131 130 152 1500

130 13 151 150 162 1600

150 15 161 160 182 1800

160 16 181 180 202 2000

180 18 201 200 222 2200

200 20 221 220 242 2400

220 22 241 240 272 2700

G, J, K 2000

240 24 271 270 302 3000

270 27 301 300 332 3300

300 30 331 330 392 3900

330 33 361 360 472 4700

512 5100

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

sales@atceramics.com

ATC Asia

sales@atceramics-asia.com

ATC Europe

saleseur@atceramics.com

VRMS = 0.707 X WVDC

SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY.

Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.

ATC 800 E Non-Magnetic Capacitors: Mechanical Configurations

ATC

SERIES

& CASE

SIZE

ATC

TERM.

CODE

CASE SIZE

& TYPE

OUTLINES

W/T IS A

TERMINATION SURFACE

BODY DIMENSIONS

INCHES (mm)

LEAD AND TERMINATION

DIMENSIONS AND MATERIALS

LENGTH

(L)

WIDTH

(W)

THICKNESS

(T)

OVERLAP

(Y) MATERIALS

800 E TN E

Non-Mag

Solderable Barrier L T

Y.380

+.015 -.010

(9.65

+0.38

-0.25)

.380

+.015 -.010

(9.65

+0.38 -0.25)

.190 (4.83)

max.

.040 (1.02)

max.

RoHS Compliant

Tin Plated over

Non-Magnetic

Barrier Termination

800 E MN

Non-Mag

Microstrip L T

.380

+.035 -.010

(9.65

+0.89

-0.25)

N/A.

High Purity

Silver Leads

LL = .750 (19.05) min.

WL = .350 ±.010

(8.89 ±0.25)

TL = .010 ±.005

(0.25 ±0.13)

Leads are Attached with

High Temperature Solder.

800 E AN

Non-Mag

Axial Ribbon

L T

800 E BN

Non-Mag

Axial Wire

Silver-plated Copper Leads

Dia. = .032 ±.002

(.813 ±.051)

LL = 2.25 (57.2) min.

Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.

ATC 800 E Capacitors: Mechanical Configurations

ATC

SERIES

& CASE

SIZE

ATC

TERM.

CODE

CASE SIZE

& TYPECASE SIZE

& TYPE

OUTLINES

W/T IS A

TERMINATION SURFACE

BODY DIMENSIONS

INCHES (mm)

LEAD AND TERMINATION

DIMENSIONS AND MATERIALS

LENGTH

(L)

WIDTH

(W)

THICKNESS

(T)

OVERLAP

(Y) MATERIALS

800 E TE

Solderable Nickel

Barrier L T

Y.380

+.015 -.010

(9.65

+0.38 -0.25)

.380

+.015 -.010

(9.65

+0.38 -0.25)

.190 (4.83)

max.

.040 (1.02)

max.

RoHS Compliant

Tin Plated over

Nickel Barrier Termination

800 E MS

Microstrip L T

.380

+.035 -.010

(9.65

+0.89

-0.25)

N/A.

High Purity

Silver Leads

LL = .750 (19.05) min.

WL = .350 ±.010

(8.89 ±0.25)

TL = .010 ±.005

(0.25 ±0.13)

Leads are Attached with

High Temperature Solder

800 E AR

Axial Ribbon

800 E AW

Axial Wire

Silver-plated Copper Leads

Dia. = .032 ±.002

(.813 ±.051)

LL = 2.25 (57.2) min.

L T

Normal

High Density

.205

.185

.050

.030

.325

.325 .385

.425

A Min. B Min. C Min. D Min.

Pad Size

Normal

High Density

.405

.385

.050

.030

.325

.325 .385

.425

Vertical Mount

Horizontal Mount

Case E

Vertical

Electrode Orientation

Horizontal

Electrode Orientation

220J

800E

ATC 800 E Capacitors: Suggested Mounting Pad Dimensions

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

sales@atceramics.com

ATC Asia

sales@atceramics-asia.com

ATC Europe

saleseur@atceramics.com

Dimensions are in inches.

W•

800 E

100

1 10 100 1000

ESR (MilliOhms)

10 pF

22 pF

47 pF

220 pF

330 pF

560 pF

5100 pF

750 pF

12 pF

ESR与频率

频率

(MHz)

ESR (毫欧姆)

典型值

800 E

串联谐振频率与容值

容值

(pF)

串联谐振频率与容值

ATC700E

800 E

串联谐振频率与容值

100

1000

10000

1 10 100 1000 10000

频率 (MHz)

(典型值)

ATC 800 E Performance Data

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

sales@atceramics.com

ATC Asia

sales@atceramics-asia.com

ATC Europe

saleseur@atceramics.com

100

1 10 100 1000 10000

Dotted line = Power dissipation limit

Solid line = Voltage limit (Vrms/Xc

)

30 MHz

10 MHz 2 MHz

虚线=受功耗限制的电流

实线=受电压（均方根值）限制的电流

(典型值)

800 E 额定电流与容值

容值 (pF)

均方根电流 (A)

额定电流在安装表面温度65°C电容热阻

12°C/W时测得。电容功耗5W时电容温

度达125°C。

温度

(

% 容值变化

电容温度系数 (TCC) = 0 ±30 PPM/°C

-1

-0.8

-0.6

-0.4

-0.2

0.2

0.4

0.6

0.8

-55 -35 -15 5 25 45 65 85 105 125

800 E 容值变化与温度

Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document

#001-992). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/

productnder/default.asp. Click on the link for Terms and Conditions of Sale.

ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of

rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.

ATC 800 E Performance Data

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

sales@atceramics.com

ATC Asia

sales@atceramics-asia.com

ATC Europe

saleseur@atceramics.com

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

American Technical Ceramics (ATC):

800E101JTN7200XT 800E102GT2500XT 800E120GTN7200XT 800E150GTN7200XT 800E152GT2500XT

800E330GTN7200XT 800E470GTN7200XT 800E512JT2000XT 800E560GTN7200X 800E560JT7200XT

800E680GTN7200XT 800E820JTN7200XT 800E8R2CT7200XT