PS-65 65W Single Output Switching Power Supply series Features : Universal AC input/Full range Low leakage current<0.75mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL OUTPUT PS-65-5 PS-65-7.5 PS-65-12 PS-65-13.5 PS-65-15 PS-65-24 PS-65-27 PS-65-48 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 12A 12A 8A 5.2A 4.7A 4.2A 2.7A 2.4A 1.35A CURRENT RANGE 0 ~ 15.2A 0 ~ 13.8A 0 ~ 9.6A 0 ~ 6A 0 ~ 5.4A 0 ~ 4.8A 0 ~ 3A 0 ~ 2.7A 0 ~ 1.5A RATED POWER 39.6W 60W 60W 62.4W 63.45W 63W 64.8W 64.8W 64.8W OUTPUT POWER (max.) Rated output power for convection; 72W (+3.3V : 50W;+5V:69W) with 18 CFM min. Forced air 100mVp-p 100mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p 3.14 ~ 3.63V 4.75 ~ 5.5V 3.0% VOLTAGE TOLERANCE Note.3 3.0% 100mVp-p 100mVp-p 100mVp-p 100mVp-p 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.25 ~ 16.5V 22.8 ~ 26.4V 25.65 ~ 29.7V 45.6 ~ 52.8V 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz 79% 80% 80% 80% 69% 1.2A/115VAC PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION 127 ~370VDC 76% ND EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD 79% 79% 79% 0.72A/230VAC COLD START 20A/115VAC <0.75mA / 240VAC 40A/230VAC 73 ~ 105W(3.3V : 51 ~ 75W)(5V : 70 ~ 105W) rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. 3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V 20 ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH 0.04%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A 300.7K hrs min. MIL-HDBK-217F (25) 127*76*42mm (L*W*H) 0.21Kg; 54pcs/14.2Kg/1.35CUFT DIMENSION 55.2 ~ 64.8V Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 ~ +60 (Refer to "Derating Curve") MTBF PACKING NOTE 100mVp-p LINE REGULATION LEAKAGE CURRENT OTHERS 100mVp-p VOLTAGE ADJ. RANGE NR INPUT PS-65-3.3 DC VOLTAGE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. Mounting holes M1 and M2 should be grounded for EMI purposes. 6. Heat Sink HS1,HS2 can not be shorted. File Name:PS-65-SPEC 2017-07-07 PS-65 65W Single Output Switching Power Supply Mechanical Specification 127 Unit:mm 5.6 5.6 115.8 series HS1 M1 M2 CN1 64.8 76 1 CN2 1 2 3 4 5 6 2 FS1 AC FUSE F4A/250V HS2 43. 42 8 NR AC Input Connector (CN1) : Molex 5277-02 or equivalent Assignment AC/N AC/L Pin No. 1 2 Mating Housing Terminal Molex 5195 or equivalent Molex 5194 or equivalent RECTIFIERS & FILTER EMI FILTER I/P 1.HS1,HS2 cannot be shorted 2.M1 is safety ground +V -V DETECTION CIRCUIT PWM CONTROL O.V.P. Output Derating VS Input Voltage 100 100 OTHERS 90 85 80 80 60 70 3.3V,5V LOAD (%) LOAD (%) fosc : 65KHz RECTIFIERS & FILTER POWER SWITCHING Derating Curve 40 20 -10 Terminal Molex 5194 or equivalent : Grounding Required FG O.L.P. Mating Housing Molex 5195 or equivalent Assignment +V -V Pin No. 1,2,3 4,5,6 ND Block Diagram DC Output Connector (CN2) : Molex 5273-06 or equivalent 0 10 20 30 40 50 AMBIENT TEMPERATURE () 60 (HORIZONTAL) 60 50 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:PS-65-SPEC 2017-07-07