Eaton®
Commercial Controls Division
S Series Snap Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2
Snap Switch Pushbutton Superstructure. . . . . . . . . . . . . . 4.8
Door Interlock Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9
Wiper/Dimmer Controls. . . . . . . . . . . . . . . . . . . . . . . . . . 4.10
Rotary Wiper Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.12
Keylock Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.14
ON-OFF Trigger Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.16
AC Variable Speed Control Switch. . . . . . . . . . . . . . . . . . 4.17
Industrial Rocker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.18
Locking Rocker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.18
Sump Pump Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.20
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.22
Circuit Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.28
The Power of Reliability
Special Devices
and Accessories
4.1
4
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.1
SPECIAL DEVICES AND ACCESSORIES
4
DESCRIPTION
The S Series product group
expands Eaton’s snap action
switch portfolio to cover all major
amperages and operating forces.
A wide range of sizes and options
gives customers the ability to
select the most appropriate switch
for their specific application.
Typical applications include
computers, consumer electronics,
small appliances, power tools,
vending machines and
packaging machinery.
Ultraminiature
The SC Series offers the smallest
size with ratings of 0.1A and 3A.
A choice of operating forces,
terminations and lever
combinations is available.
Subminiature
Slightly larger than the SC Series,
the SE/SEV Series offers more
options in operating force,
termination, and lever style. This
series also offers a 1PDT circuit
and a 1PST circuit with either NO
or NC terminals. The SEV version
has VDE microgap approval.
Subminiature Waterproof
The SF Series is ideal for
applications where the switch is
subject to submergence of water
or poor environmental conditions.
It has one current rating and
operating force but a variety of
terminations and lever
combinations. A 1PDT circuit and
a 1PST circuit with either NO or
NC terminals is available.
General
The SG Series is the standard size
snap switch with amperages from
0.1A to 15A, and a variety of
operating forces.
With VDE approval, the SGV Series
has a contact distance of larger
than 3mm.
Low Torque
The SJ Series is the low torque
series designed to meet
applications where a light
actuating force is needed.
A selection of operating forces and
lever combinations is available.
SPECIFICATIONS
See specification table.
Approvals:
Q SEV and SGV series only.
4.2
S Series Snap Action Switches
SPECIFICATIONS TABLE
SC SE SEV SF SUBMINIATURE SG SGV SJ
ULTRAMINIATURE SUBMINIATURE SUBMINIATURE VDE WATERPROOF GENERAL GENERAL VDE L OW TORQUE
Operating Speed 1 to 500mm/sec. 0.1 to 1mm/sec. 0.1 to 1mm/sec. 0.1 to 1mm/sec. 0.1mm/sec. to 1m/sec. 0.1mm/sec. to 1m/sec. 1 to 360/sec.
200 ops./min. (mech) Less than 240 ops./min. (mech)
Operating Frequency 30 ops./min. (elec) 300 ops./min. 300 ops./min. 300 ops./min. 300 ops./min. 400 ops./min. 20 ops./min. (elec)
Contact Resistance 30m max. 30m max. 30m max. 30m max. 30m, 100m max. 30m max. 30m, 100m max.
(Initial)
Insulation 100M min. 100M min. 100M min. 100M min. 100M min. 100M min. 100M min.
Resistance @ 250V dc @ 500V dc @ 500V dc @ 500V dc
Dielectric AC 1,000V RMS AC 1,000V RMS AC 1,000V RMS AC 1,000V RMS AC 1,000V RMS AC 1,000V RMS 600V ac (50-60Hz)/
Strength (50-60Hz) (50-60Hz) (50-60Hz) (50-60Hz) (50-60Hz) (50-60Hz) 1,500V ac (50-60Hz)
Shock Resistance:
Electrical Approx. 30G More than 30G More than 30G More than 30G Approx. 30G More than 30G 100G
Mechanical Approx. 100G More than 100G More than 100G More than 100G Approx.100G More than 100G 100G
Ambient -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +125°C -25°C to +80°C
Ambient Humidity 85% RH max. 85% RH max. 85% RH max. 85% RH max. 85% RH max. 85% RH max. 85% RH max.
Service Life:
Electrical (at rated load, 15,000-500,000 10,000-100,000 10,000 50,000 6,000-100,000 50,000-100,000 100,000
depending on type) ops./min. ops./min. ops./min. ops./min. ops./min. ops./min. ops./min.
Service Life: 10,000,000 10,000,000 10,000,000 2,000,000 10,000,000 10,000,000 10,000,000
Mechanical ops./min. ops./min. ops./min. ops./min. ops./min. ops./min. ops./min.
SEV Series
Subminiature VDE
SE Series
Subminiature
SC Series
Ultraminiature
Q
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.2
SF Series
Subminiature Waterproof
4.3
SG Series
General
SGV Series
General VDE
SJ Series
Low Torque
SNAP ACTION SWITCH SELECTION TABLE
Ratings Operating Force Termination Type Lever Type Q Circuit Type
Type Code Type Code Type Code Type (mm) Code Type Code
See
Page 4.4
SC 0.1A/48V dc
3A/125V ac
5A/125V ac
10A/125V ac
5A/125V ac
5A/125V ac
0.1A/125V ac
3A/125V ac
6A/125V ac
10A/125V ac
15A/125V ac
4A/125V ac
10A/125V ac
5A/125V ac
50
70
50
50
10
30
60
70
80
40
70
50
See
Page 4.4
See
Page 4.4
See
Page 4.4
See
Page 4.5
See
Page 4.5
See
Page 4.5
SE
SEV
SF
SG
SGV
SJ
C
E
C
E
G
C
E
G
E
E
M
L
S
H
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Solder
PCB
Left-Angle
(1.3mm)
Right Angle
Quick-Connect
Solder
PCB
Solder
PCB
Wire (Bottom)
Solder
Screw
PCB
Right-Angle
Quick Connect
(.187″)
Quick Connect
(.250″)
Quick Connect
(.187″)
Quick Connect
(.250″)
Solder
Button
Straight (14.6)
Straight (16.6)
Straight (22.7)
S Roller (15.8)
Roller
Button
Straight (4.4)
Straight (6.4)
Straight (12.3)
Button
Straight (4.4)
Straight (6.4)
Straight (12.3)
S Roller (5.9)
Roller
Button
Straight (12.9)
Straight (27.2)
Straight (51.1)
S Roller (24.2)
Roller (12.2)
Roller (25.6)
Button
Straight (13.7)
Straight (27.2)
Straight (51.0)
S Roller (24.2)
Roller (12.2)
Roller (25.6)
Straight (50)
Straight (65)
Straight (80)
10
30
PCB
PCB (Special)
Left-Angle
Right-Angle
30
40
50
60
10
30
50
60
70
10
30
10
30
90
10
20
30
60
70
72
70
72
10
A
C
E
A
B
C
D
E
G
A
B
C
D
A
B
C
D
E
G
A
B
C
D
E
G
H
A
B
C
D
E
G
H
P
Q
R
0
0
1
2
0
1
2
0
1
2
1
0
0
1 P.D.T
1 P.D.T.
1 P.S.T.-NO
1 P.S.T.-NC
1 P.D.T.
1 P.S.T.-NO
1 P.S.T.-NC
1 P.D.T.
1 P.S.T.-NO
1 P.S.T.-NC
1 P.S.T.-NO
1 P.D.T.
1 P.D.T.
Button
Straight
Simulated
Roller
Start with this ...to get to your
Base Circuit Number...add each appropriate Code Number or Letter...Complete Catalog Number
Series Reference Rating Force Termination Lever Circuit Complete Catalog Number
SC 30 E 30 A 0 SC30E30A0
HOW TO ORDER — SNAP ACTION SWITCH
To determine your Complete Catalog Number, you must start with the appropriate Base Circuit Number
and add the appropriate Code Letters and/or Numbers as in the example below:
SC SERIES — ULTRAMINIATURE
SE SERIES — SUBMINIATURE
SEV SERIES — SUBMINIATURE VDE
SF SERIES — SUBMINIATURE WATERPROOF
SG SERIES — GENERAL
SGV SERIES — GENERAL VDE
SJ SERIES — LOW TORQUE
Series
QSee page 4.6 for typical lever drawings.
4
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.3
S Series Snap Action Switches (continued)
SPECIAL DEVICES AND ACCESSORIES
4
4.4
OPERATING FORCE REFERENCE TABLE
Lever OF OF Maximum OP PT Maximum OT Minimum MD Maximum FP Maximum RF Maximum
Type W Code g/ounce mm (inches) mm (inches) mm (inches) mm (inches) mm (inches) g/ounce
15/.525
20/.7
5/.175
8/.28
4/.014
7/.254
50/1.75
35/1.23
20/.7
14/.49
10/.35
6/.21
13/.455
9/.315
5/.175
10/.35
7/.245
4/.014
50/1.75
35/1.23
20/.7
15/.525
10/.35
6/.21
13/.455
8/.28
6/.21
13/.455
6/.21
5/.175
13/.455
8/.28
5/.175
15/.525
8/.28
6/.21
SC SERIES — ULTRAMINIATURE SC SERIES — ULTRAMINIATURE
SE SERIES — SUBMINIATURE SE SERIES — SUBMINIATURE
SEV SERIES — SUBMINIATURE VDE SEV SERIES — SUBMINIATURE VDE
SF SERIES — SUBMINIATURE WATERPROOF SF SERIES — SUBMINIATURE WATERPROOF
AC 90/3.25 7.00 ±.30 (.276) 1.30 (.051) .20 (.008) .20 (.008) 8.00 (.314)
E 150/5.25
CC 30/1.05 8.40 ±.80 (.330) 3.40 (.134) .60 (.024) .80 (.031) 11.00 (.433)
E 50/1.75
EC 25/.88 10.50 ±.80 (.413) 3.30 (.129) .60 (.024) .80 (.031) 13.00 (.512)
E 40/1.4
A E 203/7.11 8.40 ±.30 (.330) 1.20 (.047) .60 (.024) .10 (.004) 9.30 (.366) 50/.175
B E 57/2.0 8.80 ±1.10 (.346) 4.30 (.169) 2.10 (.082) .50 (.020) 12.00 (.472) 14/.490
C E 51/1.79 8.80 ±1.20 (.346) 4.80 (.189) 2.40 (.094) .60 (.035) 12.40 (.488) 13/455
D E 39/1.37 8.80 ±1.60 (.346) 6.30 (.248) 3.10 (.122) .90 (.016) 13.50 (.531) 10/.35
E E 53/1.86 10.70 ±1.20 (.421) 4.60 (.181) 2.30 (.091) .40 (.016) 14.10 (.558) 13/.455
G E 57/2.0 13.90 ±1.10 (.547) 4.30 (.169) 2.1 (.082) .40 (.016) 17.10 (.669) 14/.49
G 249/8.72
A E 146/5.11 11.40 ±.30 (.449) 1.10 (.043) .40 (.016) .20 (.008) N/A
C 104/3.64
G 80/2.8
B E 50/1.75 11.80 ±1.10 (.465) 4.60 (.181) .90 (.035) .80 (.031) N/A
C 35/1.23
G 70/2.45
C E 45/1.58 11.80 ±1.20 (.465) 5.10 (.200) 1.00 (.039) .80 (.031) N/A
C 30/1.05
G 55/1.93
D E 35/1.23 11.80 ±1.60 (.465) 6.90 (.270) 1.40 (.055) 1.10 (.043) N/A
C 25/.88
G 249/8.72
A E 148/5.18 11.40 ±.30 (.449) 1.10 (.043) .40 (.016) .20 (.008) 12.20 (.480)
C 104/3.64
G 60/2.10
B E 35/1.23 11.80 ±.80 (.465) 3.60 (.142) .60 (.024) .80 (.031) 14.60 (5.75)
C 25/.88
G 55/1.93
C E 33/1.16 11.80 ±.90 (.465) 4.00 (.157) .60 (.024) .80 (.031) 14.90 (.587)
C 25/.88
G 45/1.58
D E 25/.88 11.80 ±1.50 (.465) 6.10 (.240) 1.50 (.059) 1.50 (.059) 16.40 (.646)
C 20/.7
G 56/1.96
E E 34/1.19 13.70 ±1.00 (.539) 4.60 (.181) .80 (.031) .80 (.031) 17.30 (.681)
C 25/.88
G 60/2.1
G E 35/1.23 17.50 ±.87 (.689) 3.80 (.150) .80 (.031) .80 (.031) 20.50 (.807)
C 25/.88
OPERATING FORCE REFERENCE TABLE KEYQ
Abbreviation Description Abbreviation Description Abbreviation Description Abbreviation Description
OF Operating Force PT Pretravel MD Movement Differential RF Releasing Force
OP Operating Position OT Overtravel FP Free Position
QRefer to page 4.6 for definitions. WReference the Selection Table (page 4.3) and Lever Type Drawings (page 4.6).
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.4
4.5
OPERATING FORCE REFERENCE TABLE(continued)
Lever OF OF Maximum OP PT Maximum OT Minimum MD Maximum
Type Q Code g/ounce mm (inches) mm (inches) mm (inches) mm (inches)
AE 510/17.9 14.40 ±.50 (.555) 1.90 (.074) .70 (.028) -1.20 (-.047)
M— — — — —
BE 447/15.6 15.00 ±.60 (.590) 2.20 (.087) .80 (.031) 1.40 (.055)
M 314/11.0 15.00 ±.90 (.590) 3.10 (.122) 1.10 (.043) 2.00 (.079)
CE 225/7.88 15.00 ±1.20 (.590) 4.30 (.169) 1.60 (.063) 2.70 (.106)
M 185/6.48 15.00 ±1.40 (.590) 5.20 (.204) 1.90 (.075) 3.30 (.130)
DE 120/4.2 15.00 ±2.20 (.590) 8.10 (.319) 3.00 (.118) 5.10 (.201)
M 108/3.78 15.00 ±2.40 (.590) 9.00 (.354) 3.30 (.130) 5.70 (.224)
EE 253/8.86 18.40 ±1.00 (.724) 3.80 (.150) 1.40 (.055) 2.40 (.094)
M 204/7.14 18.40 ±1.30 (.724) 4.80 (.189) 1.70 (.067) 3.00 (.118)
GE 502/17.6 20.40 ±.50 (.803) 1.90 (.075) .70 (.028) 1.20 (.047)
M 340/11.9 20.40 ±.80 (.803) 2.90 (.114) 1.00 (.039) 1.80 (.071)
HE 239/8.37 20.40 ±1.10 (.803) 4.10 ±(.161) 1.50 (.059) 2.60 (.102)
M 195/6.83 20.40 ±1.30 (.803) 5.00 (.197) 1.80 (.071) 3.20 (.125)
SGV SERIES — GENERAL VDE
OPERATING FORCE REFERENCE TABLE(continued)
Lever OF Maximum OP PT Maximum OT Minimum MD Maximum
Type Q g/ounce mm (inches) mm (inches) mm (inches) mm (inches)
Code A B C D E F G
Code H J K L M N P
A 18/.63 45/1.58 75/2.63 110/3.85 170/5.95 230/8.05 330/11.6 14.70 ±.50 (.579) 1.20 (.047) 1.27 (.050) 0.025 (.001)
B18/.63 45/1.58 75/2.63 110/3.85 170/5.95 230/8.05 330/11.6 15.30 ±.50 (.602) 1.57 (.062) 1.27 (.050) 0.41 (.016)
8/.28 27/.95 37/1.30 50/1.75 85/2.98 120/4.2 175/6.13 15.30 ±1.10 (.602) 2.50 (.098) 2.00 (.079) 0.50 (.020)
C8/.28 22/.77 37/1.3 50/1.75 86/3.01 125/4.38 180/6.3 15.30 ±1.50 (.602) 3.18 (.125) 2.16 (.085) 0.76 (.030)
5/.175 16/.56 22/.77 30/1.05 51/1.79 65/2.28 90/3.15 15.30 ±2.30 (.602) 2.60 (.102) 3.30 (.130) 1.02 (.040)
D— 13/.455 25/.88 30/1.05 49/1.72 70/2.45 120/4.2 15.30 ±2.50 (.602) 7.60 (.299) 3.00 (.118) 1.20 (.047)
— 8/.28 15/.525 20/.7 30/1.05 35/1.23 50/1.75 15.30 ±4.30 (.602) 10.00 (.394) 5.00 (.197) 1.70 (.067)
E10/.35 28/.98 43/1.51 55/1.93 91/3.19 120/4.2 172/6.02 18.70 ±1.50 (.736) 3.18 (.125) 2.16 (.085) 0.76 (.030)
7/.245 16/.56 24/.84 35/1.23 56/1.96 70/2.45 100/3.5 18.70 ±2.10 (.736) 5.60 (.220) 3.30 (.130) 1.02 (.040)
G20/.7 55/1.93 80/2.8 110/3.85 170/5.95 230/8.05 330/11.6 20.70 ±.80 (.815) 1.20 (.047) 1.02 (.040) 0.25 (.010)
8/.28 35/1.23 55/1.93 70/2.45 100/3.5 120/4.2 175/6.13 20.70 ±1.10 (.815) 2.50 (.098) 2.00 (.079) 0.40 (.016)
H8/.28 30/1.05 50/1.75 55/1.93 100/3.5 125/4.38 180/6.3 20.70 ±1.50 (.815) 3.18 (.125) 2.16 (.085) 0.76 (.030)
5/.175 20/.7 30/1.05 40/1.4 51/1.79 65/2.28 90/3.15 20.70 ±2.20 (.815) 5.08 (.200) 3.05 (.120) 1.02 (.040)
SG SERIES — GENERAL SG SERIES — GENERAL
QReference the Selection Table (page 4.3) and Lever Type Drawings (page 4.6).
4
OPERATING FORCE REFERENCE TABLE (continued)
Lever Type Q OFCode OT Maximum Releasing Torque PT Maximum OT Minimum MD Minimum Return Travel Total Travel FP
g-cm (oz.-in.) Min. g-cm (oz.-in.) Minimum
P, Q,R L 5.1 (0.0708) 0.6 (0.0083) 21° 17° 2° 5° 38° 15 ±3°
P, Q,R S 7.6 (0.1054) 0.9 (0.0125) 21° 17° 2° 5° 38° 15 ±3°
P, Q,R H 10.2 (0.1415) 1.3 (0.0180) 21° 17° 2° 5° 38° 15 ±3°
SJ SERIES — LOW TORQUE SJ SERIES — LOW TORQUE
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.5
S Series Snap Action Switches (continued)
SPECIAL DEVICES AND ACCESSORIES
4
4.6
LEVER TYPE REFERENCE TABLE
These drawings show the SG and SJ Series. Construction for other Series may vary slightly. Refer to Selection Table (page 4.3) for Lever Length.
LEVER TYPES
0˚
13˚ 15˚
21˚
38˚
Button
Code A
Straight (Medium)
Code C
Straight
Code B
Straight (Long)
Code D
Simulated Roller
Code E
Roller (Long)
Code H
Roller (Short)
Code G
Series SJ
Code P, Q, R
MECHANICAL TERMS
MECHANICAL TERMS
Free P osition The unoperated, fully extended position of the actuator. Movement Distance or angle the actuator travels in returning
Differential from Operating Position to Reset Position.
Pretravel Distance or angle the actuator travels Release The amount of external force or torque the switch will overcome
from free position to the Operating Position. Force when returning from Overtravel Position to Free Position.
Operating The position of the actuator when the snap action of Total Travel The sum of pretravel and overtravel.
Position all switch contacts occurs during actuation stroke.
Operating Force or torque applied to the actuator Snap Action A rapid motion of the contacts from one position to another.
Force to reach the Operating Position. Snap Action is independent of rate of travel of actuator.
Overtravel Movement of actuator from Operating Position Contact Pressure At any point, the amount of force holding stationary
to final position at end of actuating stroke. and movable contacts together.
Overtravel Force or torque applied to actuator to move from Contact Gap The effective open distance between the movable
Force Operating Position to full Overtravel Position. and stationary contacts.
Reset Position of actuator when all switch contacts Multiple Break An arrangement of contacts such that the circuit is
Position return to positions prior to actuation. broken simultaneously in several places.
SWITCH
PLUNGER
OPERATE
POSITION
MOUNTING HOLE CENTERLINE
PRETRAVEL
FREE
POSITION
OPERATE
FORCE
OVTR.
POSITION
OVER-
TRAVEL RELEASE
POSITION
RELEASE
FORCE
OVERTRAVEL
FORCE
DIFFERENTIAL TRAVEL
DEFINITION OF OPERATING CHARACTERISTICS
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.6
4.7
12.70 (.500)
5.20±0.10
(.200)
ø2.05 HOLE
(.080)
3.15
(.120)
0.90
(.035)
6.50
(.260) 5.80 (.200)
5.80 (.200)
12.80±0.15 (.500)
ø2.20
(.090)
3.50 (.140) 6.50 (.260)
1.50 (.060)
2.05 HOLE (.080)
0.40
(.016)
5.80±0.15
(.230)
2.90 (.110) +0
–0.05
6.05
(.240)
8.40±0.30
(.330)
7.45 (.290)
7.50±0.10
(.300)
4.85
(.190)
6.65
(.260)
9.00 Max 9.30
(.350 Max .370 )
–0
6.86
(.270)
7.50±01
(.300)
5.20
(.200) 9.50±010
(.370)
7.50±01
(.300) 2.40
(.090)
+0.30
3.20
(.130)
2.20
(.090/.002)
–0
+0.10
2.20
(.090)
+0.10
2.50
(.100) – 0
DIMENSIONS APPROXIMATE IN MM (INCHES)
SC SERIES — ULTRAMINIATURE SF SERIES — SUBMINIATURE WATERPROOF
3.70 (.150)
3.20
(.130)
6.40
(.250)
ø1.60
(.060)
14.50 (.570)
3.00± 0.10
(.120) 7.50
(.300)
2.00
(.080)
10.20 (.400)
2.50 (.100)
2.90 (.110)
2.40
(.090)
CNO NC
ø2.50 (.100)
1.60
(.060)
8.80
(.350) 7.30
(.290)
5.10
(.200) 9.50 (.370)
19.80 (.780)
6.40
(.250) 9.50 (.370)
+ 0.10
0.60 (.024) Thickness
ø2.40 – 0
(.090)
Lead NO cyan
Lead NC gray
Lead COM black
4.85
(.190) 7.50±0.10
(.300)
Min 500
(Min 19.70) Max 20 (Max .790) Min 500
(Min 19.70)
5.20
(.200) 9.50±0.10
(.370)
– 0
– 0
6.90
(.270)
7.45
(.290)
6.65
(.260)
Max 8.60
(Max .340)
+0.10
+0.10
2.50
(.10)
2.20 (.090)
SE SERIES — SUBMINIATURE SF SERIES (LEADS) — SUBMINIATURE WATERPROOF
3.20
(.130)
7.00 (.280)
2.90
(.110)
+0.10
7.30 (.290)
8.80 (.350)
9.50 ± 0.10
(.370)
5.10
(.200)
1.60
(.060)
+0.10
7.70 (.300)
4.85
(.190) 7.50 ± 0.70
(.300)
6.40 (.250)
2.40
(.090 )– 0
+0.10
2.50
(.100 )
– 0
ø2.40
(.090) – 0
COM
22.20 (.870)
7.70 (.300)
ø3.40
(.130)
GH
KL
5.90
(.230)
2.80
(.110) 8.40
(.330)
20.20±0.30 (.800)
27.80 (1.090)
10.30±0.10 (.400)
3.10
(.120)
0.50
(.020)
4.20
(.170)
15.90 (.630)
10.30 (.400)
NC
NO
Max. 39.00 (Max. 1.540)
SEV SERIES — SUBMINIATURE VDE SG/SGV SERIES — GENERAL/GENERAL VDE
CNO NC
14.40 (.570)
16.80 (.660)
19.20 (.760)
31.00 (1.220)
23.80 (.940)
18.00 (.710)
0.80
(0.030)
9.00 (.350) 9.00 (.350) 5.00
(.200)
6.70
(.260)
8.70 (.340)
17.50 (.690)
10.30
(.410)
SJ SERIES — LOW TORQUE
1 SGV Series has only one terminal (NO).
1
4
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.7
SPECIAL DEVICES AND ACCESSORIES
4
DESCRIPTION
These Non-Illuminated Pushbutton
Actuators complement our
SSeries Snap Switch Line featured
on pages 4.2-4.7. Theactuators
are available in three different
non-illuminated versions. The line
is complete with attractive colored
pushbutton caps for color coding
applications. Two of the series of
superstructures are available with
attractive mounting collars. They
come is a variety of colors which
act as a protective collar around
the operating button to prevent
accidental operation of the switch.
These superstructures are designed
for installation in a 12.07mm
(.475″) diameter-mounting hole.
Allseries are supplied with a flat
surface on the bushing to prevent
rotation. In the series requiring the
mounting collar, the collar itself is
the facenut tightening the
switch/superstructure assembly
down to the panel.
Options:
•NO and NC circuits.
•Pad printed buttons.
•Other colors available.
•PC terminals available.
•Round 17.78mm (.700″)
button,differentheights.
4.8
Snap Switch Pushbutton Superstructure
SNAP SWITCH SELECTION TABLE
Number
of Poles Electrical Rating Operation Characteristics Terminals Superstructure Pushbutton Pushbutton
Style Q Color Q Shroud Q
Type Code Color Code Color Code
BASE CAT.
NUMBER Q
1
(One Snap
Switch)
Momentary
1
(One Snap
Switch)
Momentary
UL Recognized and
CSA Certified:
15A, 125-250V ac
1/2 Hp, 125-250V ac
1/2A, 125V dc
1/4A, 250V dc
28V dc:
Sea Level: 10A, Res. or Ind.
6A, Motor Load 50,000 Ft.
10A, Res./6A Ind.
UL Recognized and
CSA Certified:
10A, 125-250V ac
1/3 Hp, 125-250V ac
1/2A, 125V dc
1/4A, 250V dc
28v dc:
Sea Level: 10A, Res. or 6A Ind.
6A, Motor Load
3.6A, Lamp Load
50,000 ft.: 10A, Res./6A Ind.
Op. Force — 6 to14 oz.
Release Force — 4 oz. min.
Pretravel — 1.19mm (.047″) max.
Differential Travel —
.41mm(.016″) max.
Overtravel — 1.01mm (.040″) min.
Mechanical Life — 150,000 op. min.
with min. median of 1 million.
Op. Position — 14.7mm (.578 ±.015″)
Free Position — 16.2mm (.640″) max.
SA37BCB1
SA37BCB2
SA37BCB3
SA37BCB4
SA37BCB5
Op. Force — 8 oz. max.
Release Force — 2 oz. min.
Pretravel — 1.19mm (.047″) max.
Differential Travel — .15 to
.41mm(.006to .016″)
Overtravel — 1.01mm (.040″) min.
Mechanical Life — 1 million op. min.
with min. median of 10 million.
Op. Position — 14.7mm (.578 ±.015″)
Free Position — 16.2mm (.640″) max.
QAdd code letters and numbers for Superstructure Style, Pushbutton Color and Pushbutton Shroud Color (if applicable). Example: SA37BCE12-2A6.
WNot available with decorative shroud.
COM
NC
NO S
6.01 (.237)
41.80
(1.646)
29.71
(1.170)
Flat This
Side
10.31
(.406)
2.89 (.114)
3.20 (.126)
20.19 (.795)
19.44 (.875)
0.88 (.035)
2.79 (.110)
0.81 Typ. (.032)
16.38
(.645)
5.76
(.227)
2.92
(.115)
24.71 (.973)
26.00 Dia.
(1.024)
19.40 Dia. (.764)
15/32 Dia. Nom.
32 Threads
Per Inch
C - H
COM
NC
NO S
2.03
(.080)
37.82
(1.489)
29.71
(1.170)
Flat This
Side
10.31
(.406)
2.89 (.114)
3.20 (.126)
20.19 (.795)
19.44 (.875)
0.88 (.035)
2.79 (.110)
0.81 Typ. (.032)
16.51
(.650)
5.76
(.227)
2.92
(.115)
24.71 (.973)
23.90 Dia.
(.941)
17.78 Dia. (.700)
15/32 Dia. Nom.
32 Threads
Per Inch
C - H
13.97 Dia.
(.550)
Switch base is the
same as the 17.78mm style.
11.63
(.458)14.09
(.550)
RECTANGULAR CAP STYLE 17.78 (.700) ROUND CAP STYLE 13.97 (.550) ROUND CAP STYLE
DIMENSIONSAPPROXIMATE IN MM (INCHES)
Screw
Solder Lug
Quick Connect
(.188″)
Quick Connect
(.250″)
Short Solder Lug
Screw
Solder Lug
Quick Connect
(.188″)
Quick Connect
(.250″)
Short Solder Lug
SA37BCE1
SA37BCE2
SA37BCE3
SA37BCE4
SA37BCE5 Round
17.78mm
(.700″) Dia.
Rectangular
19.43 x
15.37mm
(.765 x.605″)
13.97mm
(.550″)
Dia.W
2
5
4
White
Red
Black
Blue
Grey
Yellow
Green
Orange
-10
-2
-9
-4
-11
-5
-6
-12
A1
A6
A5
B1
B6
B5
Round Button
Shroud
White
Black
Grey
Rectangular
Shroud
White
Black
Grey
HIGH ELECTRICAL
LONG LIFE
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.8
SA37BCB42-2A6
Pushbutton Superstructure
4
4.9
SA37BCE45-10B6
Pushbutton Superstructure
SS12ET10-20Y2
Door Interlock
SS12ET10-21Y2
Door Interlock
Door Interlock Switches
ONE POLE
DIMENSIONS APPROXIMATE IN MM (INCHES)
DESCRIPTION
Door interlock switches are
attached to the door of
equipment where it is
necessary to turn power on or
off when the door is closed or
opened. This type of control is
used in applications where
maintenance and testing must
be performed inside a cabinet.
Interlock switches are supplied
with one 1PDT snap action
switch or two 1PDT miniature
snap action switches.
The snap action switches are
mounted in a frame and a
single actuator, which is spring
loaded, operates the switch.
When mounted in a door, the
closing of the door forces the
actuator against the spring
thereby closing the switch.
When the door is open, the
actuator springs out thereby
opening the power circuit.
The interlock switch has a
service position, which allows
service personnel to turn
power on even when the
cabinet door is open. When the
door is closed, the switch
automatically resets to the
normal closed position.
SPECIFICATIONS:
Ratings:
See selection table.
Operating Features:
Free position —
9.53mm (.375″) max.
Operate position —
5.12mm (.203″) max.
Depressed position —
3.17mm (.125″) max.
Materials and Finishes:
Switch — Contact Eaton
Customer Service.
1-800-962-0820
Bracket — Stainless steel.
Actuator — 1 P ole – Molded
noryl; 2 P ole – stainless steel.
Spring — Stainless steel.
Insulator — Glass cloth.
Mounting:
Tapped holes are provided for
mounting in either of two
positions — 2 screw side or
front panel mounting.
Mounting hardware is
not provided.
Options:
•Special circuits.
•Solder lug, spade, and
PC terminations.
•Special actuators.
Approvals:
UL Recognized.
CSA Certified.
42.16 Max.
(1.660)
Terminal Insulators
5.54
(.218)
4 Mtg. Holes
6-32 NC Thd. 20.63
(.812) 4.55
(.179)
6.35
(.250)
4 Mtg. Holes 6-32 NC Thd.
10.31 (.406)
12.70
(.500)
Free Position
9.53 Max. (.375) 47.75
(1.880)
Side Panel Measurement
13.21 (.520)
42.16 Max. (1.660)
Terminal Insulators
5.54
(.218) 6.35
(.250)
11.10
(.437)
4 Mtg. Holes
6-32 NC Thd.
20.63 (.812)
4.55
(.179)
47.75
(1.880)
Free Position
9.53 Max. (.375)
4 Mtg. Holes
6-32 NC Thd.
46.03
(1.812) 23.01
(.906)
Side Panel Measurement
13.21 (.520)
TWO POLE
DOOR INTERL OCK SELECTION TABLE (BOLD FACE TYPE INDICATES ITEMS NORMALLY IN DISTRIBUTOR STOCK)
Nominal Ratings Q
Amperes Horsepower
125-250V ac 125V dc 250V dc 125-250V ac
Number
of Poles Features Screw Terminal
Catalog Number
—SS12ET10-20Y3
15 0.5 0.25 1/2 One P ole #6-32 Tapped hole in SS12ET10-20Y2
actuator (.375″) deep
— SS12ET10-21Y3
15 0.5 0.25 1/2 Two P ole #6-32 Tapped hole in SS12ET10-21Y2
actuator (.375″) deep
QSea Level: 10A, Resistive or Inductive; 6A, Motor Load. 50,000 feet: 10A, Resistive; 6A, Inductive.
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.9
Paddle and Slide Controls
DIMMER AND WIPER CONTROLS
4
DESCRIPTION
Eaton’s unique family of dimmer
and wiper controls are field
proven to be the market’s most
dependable controls. Although
originally designed for the heavy
truck market, applications in
various other types of vehicles
exist. P addle and slide versions
are available and both have the
look, feel and durability associated
with our controls. Bezels and
actuators are molded in a soft
matte finish. Illuminated and
non-illuminated versions are
available. Board mounted LED’s
located behind a laser etched
panel provide illumination.
Customized light panel lettering
and custom pad printed bezels are
also available. Both dimmer and
wiper controls are designed to fit
in the NGR gang mount system
to compliment the NGR
family of switches.
SPECIFICATIONS
Ratings (Dimmer Only):
4, 6, 8,10A @ 14V dc.
2, 3, 4, 5A @ 28V dc.
Mechanical Life:
100,000 operations, maximum.
Operating Temperature Range:
-40°C to +85°C
(-40°F to 185°F).
Base Material:
High grade thermoplastic
molding material.
Mounting Means:
Snap-in mounting with
plastic bezel.
Mounting Hole:
Rectangular panel cutout.
44 x 22mm
(1.734 x .867″).
P anel Thickness:
.76 x 4.80mm
(.030 to .190″).
Approximate W eight:
1.5 oz.
...to get to your
Add each appropriate Number or Letter... Complete Catalog Number
Control Actuator Application Amperage Bezel Print Connector Circuit LED Complete
Type Type Voltage Rating Style Type Board Color Catalog Number
D P 12 4 A A L G DP124AALG
HOW TO ORDER — PADDLE AND SLIDE CONTROLS
To determine your Complete Catalog Number, you must start with the appropriate Control Type and add the appropriate
Code Letters and/or Numbers as in the example below:
PADDLE AND SLIDE CONTROLS SELECTION TABLE
CODE LETTERS AND NUMBERS
Control Code Actuator Code Application Code Amperage Code Bezel Print Code Connector Type Code Circuit Code LED Code
Type Type V oltage Rating QStyle
Packard No.
Board WColor
Dimmer
Wiper
Paddle
Slide
12 V olts
24 V olts
4
6
8
10
Wiper
Style A
Style B
Style C
Style D
18 Sec Max
Nominal
Dwell
10 Sec Max
Nominal
Dwell
Dimmer
Green
Yellow
Red
Non-Illuminated
12020398
12015345
174930-1
12034295
Leads Only
D
W
P
S
12
24
4
6
8
10
W
A
B
C
D
L
S
D
G
Y
R
X
PANEL
Code C
PANEL
B
R
I
G
H
T
D
I
M
Code A Code D
0
1
2
WIPER W
A
S
H
Code B
BEZEL PRINT STYLEE
A
B
C
D
E
QAmperage ratings for dimmers only.
WMaximum dwell time describes the average time constant for delayed wiper activation.
ECustom Pad print available for bezel or button.
4.10
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.10
DS126AEDY
Dimmer Slide Control
DP124AEDY
Dimmer Paddle Control
WS12WBESY
Wiper Slide Control
WP12WBELY
Wiper Paddle Control
Lettering to be white. Lettering style
to be Helvetica Swiff Condensed 14 pt.
26.01
(1.024)
Symbol and lettering to be stamped in white.
"WIPER" & "WASH" Lettering style to be 12 pt. Univers 59.
"OFF" Lettering to be 10 pt. Univers 59.
Custom lettering is also available.
White
Yellow Blue
Black
49.78
(1.960)
33.83
(1.332)
40.18
(1.582)
11.53
(.454)
25.88 ± .51
(1.019)
5.44
(.214)
50° ± 5°
2.54
(.100)
21.79
(.857)
2 Places
43.64
(1.718)
WIPER
W
I
P
E
R
W
A
S
H
O
F
F
Terminal Identification:
Positive (+) (blue wire)
Negative (–) (black wire)
Load (yellow wire)
Positive (+) L.E.D. light (blue wire)
Washer (white wire) washer only
Negative (–) L.E.D. light (black wire)
PADDLE CONTROL
DIMENSIONS APPROXIMATE IN MM (INCHES)
PANEL
B
R
I
G
H
T
D
I
M
8.13
(.320)
20.32
(.800)
R 2.29 Typ
(R .090)
See Detail A
33.07
(1.302)
18.92
(.745) 19.76 Travel
(.778)
49.91
(1.965)
Black
Blue
Yellow
Black
Blue
41.91
(1.650)
Terminal Identification:
Positive (+) (blue wire)
Negative (–) (black wire)
Load (yellow wire)
Positive (+) L.E.D. light (blue wire)
Open Position
Negative (–) L.E.D. light (black wire)
11.38
(.448)
26.01
(1.024)
R 2.03 Typ
(R .080)
17.15
(.675)
R 3.96 Typ
(R .156) 2.54
(.100)
68.07
(2.680)
42.24
(1.663)
44.04 ± .127
(1.734)
22.02 ± .13
(.867)
Panel Opening
24.49 Ref
(.964)
Detail A
Typ 2 Plcs
C of
Pivot Point
SLIDE CONTROL
DIMENSIONS APPROXIMATE IN MM (INCHES)
4.11
4
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.11
RW 200 Series Rotary Wiper
DIMMER AND WIPER CONTROLS
4
DESCRIPTION
The Rotary Wiper has been
designed to be a highly durable
rotary wiper control for the
transportation industry. The
RW200 series wiper has four
wiper control positions via a
rotating knob: Off , Intermittent,
Continuous Low Speed and
Continuous High Speed. The
device has a washer function that
operates the washer pump and
wiper while the knob is depressed.
Meets SAE standards J1455,
J1944 and J1988.
SPECIFICATIONS
Operating Voltage Range:
9V dc to 16V dc.
Continuous Load Rating:
17A from -40°C to 23°C
(-40°F to 73°F).
Derated to 5A @ 85°C (185°F).
Wiper Electromechanical Life:
50,000 Cycles.
Electrical Cycle Life:
250,000 Cycles in the
Intermittent Position.
300,000 Cycles combined in
the Low and High P ositions.
Operating Temperature:
-40°C to 85°C
(-40°F to 185°F).
Humidity Rating:
Device will operate properly
at 98% humidity between
-40°C to 38°C
(-40°F to 100°F).
Mechanical Shock:
The switch will withstand a three
foot drop on concrete.
Vibration:
The device will operate properly
while being exposed to 133 hours
of 1 G RMS vibration along all
3 axis, sweeping from 5 Hz to
1500 Hz at 1 octave per minute.
Load Dump Protection:
The switch will withstand a 120
Volt Load Dump per SAE J1455.
Reverse V oltage Protection:
The device shall not be damaged
when exposed to 12V dc for
5 minutes.
Options:
•Variable bushing length.
•Variable spindle length.
•Choice of connectors.
•P ad printing on knob.
ROTARY WIPER SELECTION TABLE
RW 12V dc
Series Voltage Packard Bushing Catalog
Connectors Length Number
12064752 .261″RW20012AA
12064752 .424″RW20012AB
12977042 .261″RW20012BA
12977042 .424″RW20012BB
6288538 .261″RW20012CA
6288538 .424″RW20012CB
6294544 & 2977048 .261″RW20012DA
6294544 & 2977048 .424″RW20012DB
CONNECTOR DRAWINGS
12064752 12977042 6288538
6294544 2977048
4.12
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.12
Rotary Wiper
SWITCH POSITION CIRCUIT CONTINUITY
Off Open
Intermittent Yellow – R ed and Brown
Low Speed Yellow
High Speed White
Washer Brown
Red – Positive
Black – Negative
-.015
Off/Park
(Push In)
Washer
Slowest
Intermittent
Speed
(.099)
Black Lead
Yellow Lead
WIPER
WASHER
114.43 Approx.
(4.505 Approx.)
Ref
Continuous
Fast Speed
84.71 Approx.
(3.335 Approx.)
Continuous
Low Speed
Fastest
Intermittent
Speed
Brown Lead
Red Lead
Blue Lead
White Lead
2.51
45.84
(1.805)
10.77
(.424)
15.47
.609
-.38
+.25
+.010 34.50
(1.358)
VIEW B
9.40
(.370)
Flats
1.176
29.87
(2.230)
56.643.029 -.010
+.006
-.25
76.94+.15
Dia
Dia
+.010
VIEW B
55.57
(2.188)
55.57
(2.188)
6.30 Dia
(.248 Dia)
20º
20º
70º
20º
EATON
+.25
-.64
-.025
()
()
()
RW200 SERIES
DIMENSIONS APPROXIMATE IN MM (INCHES)
CIRCUIT CONTINUITY WIRE TERMINATIONS
WIRE COLOR SWITCH CONNECTIONS
Yellow Motor Low Speed Terminal
White Motor High Speed Terminal
Blue Motor Park Terminal
Black Ground
Brown Washer Pump
Red + 12V dc (Positive)
4.13
4
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.13
SPECIAL DEVICES AND ACCESSORIES
4
DESCRIPTION
General P urpose
These keylock switches provide
reliable performance in a space
saving design. They all utilize
Quick-make/Quick-break switching
mechanisms, with wiping action
blades for self-cleaning contacts.
Heavy Duty
These switches have a
Slow-make/Slow-break switching
mechanism with large butt type
contacts. Their high current
switching capability allows them
to be used for locking switching
circuits in power applications.
SPECIFICATIONS
Ratings:
See selection table.
Circuits:
General P urpose
1PST, 1PDT, 2PST, 2PDT.
Maintained action.
Heavy Duty
2PST, 2 Circuit.
Maintained.
Contact Mechanism:
General P urpose
Quick-make/Quick-break
wiping action.
Heavy Duty
Slow-make/Slow-break
butt contact.
Contact Material:
General P urpose
Movable — Bronze silver plated.
Stationary — Brass silver plated.
Heavy Duty
Movable — Silver cadmium oxide.
Stationary —
Silver cadmium oxide.
Termination Types:
General P urpose
Solder Lugs — Brass
silver plated.
Heavy Duty
7842 Series:
Screw Terminals — Brass
designed to accept
#7-32 x 3/16 binding head
(Cat. No. 11-6085-2) screws.
Furnished unassembled.
7846 Series:
Quick-Connect Terminals — Brass.
4.14
General Purpose Heavy Duty Keylock Switches — AC/DC Rated
GENERAL PURPOSE KEYL OCK AC/DC SWITCHES SELECTION TABLE
Rating Poles
and
Throw
Key
Removal
Position
Solder Lug
Terminals
Catalog
Number
Circuit with Key in... (Keyway Down)
LEFT CENTER RIGHT
Position Position Position
(Keyway)
1 P.S.T — OFF ON CENTER 8928K492
— OFF ON CENTER AND RIGHT 8928K493
1 P.D.T. — ON ON CENTER AND RIGHT 8928K494
1 P.D.T. — ON ON CENTER 8283K150
— OFF ON CENTER 8370K150
2 P.S.T. — ON OFF CENTER 8370K151
ON OFF — LEFT 8370K152
2 P.S.T. — OFF ON CENTER AND RIGHT 8928K495
2 P.D.T. — ON ON CENTER 8373K150
— ON ON CENTER AND RIGHT 8373K151
6A, 125V ac/dc
3A, 250V ac/dc
6A, 125V ac/dc
1A, 250V ac/dc
6A, 125V ac/dc
1 1/2A, 250V dc
6A, 125V ac/dc
3A, 250V dc
6A, 125V ac/dc
3A, 250V ac/dc
6A, 125V ac/dc
3A, 250V dc
HEAVY DUTY KEYL OCK AC RATED SWITCHES SELECTION TABLE
Rating Circuit Action Key Removal
Position Type of
Termination Catalog
Number Key Style Q
Slotted Bushing Length
mm inches
2 P.S.T. OFF-ON (Clockwise) OFF 14.27 .562 Screw 7842K2 WA
OFF-ON (Clockwise) Both 14.27 .562 Screw 7842K3 WA
2 P.S.T. OFF-ON-OFF-ON OFF 12.70 .500 Quick-Connect 7846K1 WE
20A, 120V ac
20A, 240V ac
1 1/2 Hp, 120V ac
2 Hp, 240V ac
20A, 120V ac
20A, 240V ac
1 1/2 Hp, 120V ac
2 Hp, 240V ac
7842 TYPE SERIES
7846 TYPE SERIES
QKey Style: A — 13-5496, E — 13-8173.
WNot CSA Certified.
59-01 Special Devices Section 4 1/28/99 2:18 PM Page 4.14
8928K493
General Purpose Keylock
4
4.15
8373K151
General Purpose Keylock
7846K1
Heavy Duty Keylock
7842K2
Heavy Duty Keylock
5.03 (.198)
5.08 (.200)
1.42 (.056)
1.73 (.068)
Mtg. Hole
11.96 (.471)
12.01 (.473)Dia.
Key Removable
In Both
Positions
4.97 (.196)
18º
18º 13.11
(.516)
15/32-32
Thds.
27.43
(1.08)
20.90
(.823)
4.44
(.175)
18.67
(.735)
5.59
(.220)
0.25
(.010)
17.45
(.687)
13.84
(.545)
34.92
(1.375)
5.03 (.198)
5.08 (.200)
1.42 (.056)
1.73 (.068)
Mtg. Hole
11.96 (.471)
12.01 (.473)Dia.
Key Removable
In Both
Positions
4.97 (.196)
18º
18º 13.11
(.516)
15/32-32
Thds. 1.55 (.061)
1.60 (.063)
27.43
(1.08)
12.45 (.490)
21.36
(.841)
19.05
(.750)
24.38
(.960)
12.70
(.500)
18.24
(.718)
8.71
(.343) 33.32
(1.312)
15/32 - 32 T.P.T.
Keyway 2.03 - 2.16 W. x 1.12 - 1.17 D.
(.080) (.085) (.044) (.046)
23.01
(.906)
14.27
(.562)
15/32 - 32 T.P.T.
Keyway 1.65 W. x 0.81 - 0.89 D.
(.065) (.032) (.035)
24.21
(.953)
29.74
(1.171)
32.92
(1.296)
8928K493 — 1PST/1PDT 8373K151 — 2PST/2PDT
DIMENSIONS APPROXIMATE IN MM (INCHES)
Mounting Means:
General P urpose
Threaded Bushing —
11.89mm (.468″) dia.
Keyway — 1.55-1.70mm
wide x .89-.94mm deep
(.062-.067″wide x
.035-.370″deep)
Hardware Supplied —
1 hexnut (Cat. No. 15-192)
and 1 chamfered dress nut
(Cat. No. 15-994-2) supplied.
Furnished unassembled.
Heavy Duty
7842 Series:
Slotted Bushing —
11.89mm (.468″) dia.
Hardware Supplied —
4 terminal screws
(Cat. No. 11-6085-2) and 1
hexnut (Cat. No. 15-2525-58).
Furnished unassembled.
7846 Series:
Hardware Supplied —
2 hexnuts
(Cat. No. 15-2525-59).
Dielectric Withstand:
1000V RMS minimum.
Operating
Temperature Range:
-17.8°C to +65.6°C
(0°F to 150°F).
Agency Approvals:
UL Recognized.
CSA Certified
(except where noted).
For more information, contact your
Eaton Sales Representative.
7842K2 — 2PST 7846K1 — 2PST
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.15
SPECIAL DEVICES AND ACCESSORIES
4
DESCRIPTION
Utility
The 140 Series Trigger Switch has
a proven record of meeting the
demanding requirements for both
consumer and industrial tools.
Industrial
The rugged PT Series Trigger
Switch is designed for use in high
performance, professionally
rated power tools.
SPECIFICATIONS
Ratings:
See selection table.
Terminal TypesQ:
Utility
Screw Terminals — Brass
designed to accept #M3.5 x 5.0
P osidrive (Cat. No. A160-166)
terminal screws.
Plug-in Terminals —
Accept #18 or #20 AWG WireW.
Industrial
Screw Terminals —
Copper designed to accept
#M6.3 x .6 Thread
(Cat. No. A60-117)
terminal screws.
Approvals:
UL Recognized.
CSA Certified.
European Approvals.
4.16
Utility and Industrial ON-OFF Trigger Switch
7.00 (.270)
2.73 (.100)
36.00
(1.410)
11.05
(.430) 16.20
(.640)
13°
8.10
(.310)
4.30 (.170)
29.00
(1.140)
5.00 (.190)
Travel
11
22
33.00
(1.300)
28.65
(1.120)
140 SERIES IN-LINE TRIGGER STYLE (UTILITY)
1
1
2
2
10.0
(.394)
36.20 ± 0.76
(1.145)
14.90 ± 0.38
(.587)
3.40 ± 0.25
(.134)
60.33 ± 0.38
(2.375)
48.60 (1.913) 21.74 ± 0.51
(.856)
10.40
(.409)
42.29 (1.665)
R 28.60
(R 1.125)
Ø 4.35
(Ø .171)
16.99 (.669)
Ref.
29.10 ± 0.76
(1.145) 22.70
(.894)
10.00 ± 0.25
(.394)
11.13
(.438)
12.70
(.500)
4.00
(.157) 1.50
(.059)
47.00
(1.850)
PT SERIES (INDUSTRIAL)
UTILITY AND INDUSTRIAL ON-OFF TRIGGER SWITCHES SELECTION T ABLE
Ratings Poles and Throw
10A, 125V ac
8 (6)A, 250V ac
22A, 125V ac/dc
10A, 250V ac/dc
2 P.S.T.
2 P.S.T.
2 P.S.T.
2 P.S.T.
2 P.S.T.
2 P.S.T.
Mounting
Nest
Nest
Nest
Nest
Flange
Flange
Termination Trigger Style T rigger or Lever
Material With Lock-On
Screw
Screw Overhanging
Overhanging Nylon
Nylon No
Yes
Plug-in
Plug-in
Screw
Screw
In-line
In-line
In-line
In-line
Nylon
Nylon
Nylon
Nylon
Yes
No
Yes
No
1402
140L2
140CP2
140CPL2
Catalog Number
PT2A21B
PT2A1A11B
UTILITY UTILITY
INDUSTRIAL INDUSTRIAL
DIMENSIONS APPROXIMATE IN MM (INCHES)
QAll terminals are furnished unassembled.
WDo not insert # 20 Wire after removing #18 Wire.
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.16
140PHX02
Utility ON/OFF
4
4.17
PT2M21H
Industrial ON/OFF
8600 Series
AC Variable
J1/J2 Series
AC Variable
AC Variable Speed Control Switches
AC VARIABLE SELECTION TABLE
Ratings Wiring
Diagram
(See Below) Capacitor
Connection Trigger
or Lever
Material
Cat. No.
With Side
Lock Pin
6A, 125V ac Q
DESCRIPTION
Our broad range of ac speed
control switches are designed
to meet the requirements of
portable electric power tools
for either 125/115V or
250/230V input. Both 1/2
wave (SCR) and full wave
(Triac) circuits are available as
well as resistor and
potentiometer outputs.
SPECIFICATIONS
Circuits:
1PST or 2PST with integrated
1/2 wave or full wave speed
control with bypass contact.
Contact Material:
Moveable — Copper.
Stationary — Copper.
Terminal Types:
Jepac Series —
Screw Terminals for
Line Connector.
Plug-in Terminals for
Motor Connector —
0.5-1.5mm2/#22-16 A WGWire.
Plug-in Terminals for
capacitor connector for
European market.
8600/8622 —
Plug-in terminals for line
and motor connector.
Base Material:
Nylon, Phenolic or P olyester.
Dielectric Withstand:
1000V RMS Minimum
UL/CSA Requirement.
1500V RMS Minimum
European Requirement.
Options:
•Various trigger styles
and colors.
•Various reversing lever styles
and colors.
•Potentiometer.
•ON/OFF and 2-speed versions.
•Half-wave.
•Full-Wave.
•Lock-on or lock-off —
custom lock buttons.
•Actuator adjustment wheel.
•Reversing Switch.
Approvals:
UL Recognized, CSA Certified.
European Approvals
(Jepac only).
Poles and
Throw
2 P.S.T. A Plug-in No In-line Nylon Yes 8600K2
2 P.S.T. A Plug-in No In-line Nylon Yes 8600K3
2 P.S.T. A Plug-in No Overhanging Nylon No 8622K2 Q
1 P.S.T. B Screw Plug-in Yes In-line Nylon Yes J1 Series
1 P.S.T. B Screw Plug-in Yes In-line Nylon Yes J2 Series
Termination Trigger Style With
Reversing
Q8622K2: 4A, 125V. Series 8600 have higher ratings available. Contact your local Eaton Sales Representative.
Diagram A
Line 1
Line 2
Load 1
Load 2
1
1a
2
2
1
2
Main
Contact
Diagram B
Electronics
Bypass
28.45
(1.120)
7.87 (.310)
Travel
3.81
(.150)
11.43
(.440)
2.27
(.090)
17.27
(.680)
31.75
(1.250)
28.45 (1.120)
5.84 (.230)
0.76 (.030)
15.24 (.600)
7.87 (.310)
Travel
61.60 (2.420)
41.78
(1.640)
28.83
(1.130)
26.16
(1.030)
8.00 (.310)
Travel
24.33
(.960)
74.79 (2.940)
48.39 (1.900)
14.99
(.590) 16.00
(.630)
8622 SERIES OVERHANGING TRIGGER JEPAC SERIES
12.95 (.510) T ravel
17.35
(.680)
22.35
(.880)
30.35
(1.190)
15.54
(.610)
Off Position
62.74 (2.470)
9.78
(.380)
8.20 (.320)
12.70 (.500)
35.71
(1.410)
24.00
(.936)
5.05
(.197)
33.00
(1.287)
64.00
(2.496)
15.40
(.601)
33.00
(1.287)
29.00
(1.131)
29.00
(1.131)
16.00
(.624)
(1.090)
13.50
(.527)
1
2
49.10 ± .10
27.94 ± .25
10°
(.312)
(1.915)
8.00 ± .10
DIMENSIONS APPROXIMATE IN MM (INCHES)
WIRING DIAGRAMS 8600 SERIES IN-LINE TRIGGER
7A, 125V ac
6A, 250V ac
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.17
SPECIAL DEVICES AND ACCESSORIES
4
4.18
Industrial Rocker Switch and Locking Rocker
INDUSTRIAL ROCKER SWITCH SELECTION TABLE
Rating Poles
and
Throw Mounting Screw Terminals
Catalog Number
BASE
CIRCUIT
SEE PAGE4.28
Circuit with Rocker in
16A, 125V ac/dc
8A, 250V ac/dc 2 P.S.T. ON NONE OFF C Flush 8630K50
1 Hp, 125V ac/dc
UP
Position CENTER
Position DOWN
Position
DESCRIPTION
Locking Rocker
This unique switch features a
patented internal locking
mechanism, which allows the
switch to be locked in the
off-position to prevent
unauthorized or accidental
operation. The key to locking or
unlocking the switch is a
removable paddle rocker cap,
which must be inserted in order
tomove the switch to the
“ON”position. The switch can
stillbe turned “OFF.”
The locking rocker is ideally suited
for such markets as the portable
tools, computers, lawn and
gardenequipment, marine
andconstruction.
Industrial Rocker Switch
This all-plastic rocker switch was
originally designed for portable
tool applications. It has a high
rated Quick-make, Quick-break
over center type contact
mechanism suitable for either ac
or dc service.
SPECIFICATIONS
Ratings:
See selection table.
Circuits:
Industrial Rocker Switch
2PST maintained action.
Contact Mechanism:
Locking Rocker
Slow-make/Slow-break
contactmechanism.
LOCKING ROCKER SELECTION TABLE
Rating QPoles
and
Throw
BASE
CIRCUIT
SEE PAGE4.28 Catalog
Number
Circuit with Rocker in
1 P.S.T. ON NONE OFF A 8166K27
1 P.D.T. ON NONE ON B 8166K28
2 P.S.T. ON NONE OFF C 8166K25
2 P.D.T. ON NONE ON D 8166K26
1 P.S.T. ON NONE OFF A 8166K23
1 P.D.T. ON NONE ON B 8166K24
2 P.S.T. ON NONE OFF C 8166K21
2 P.D.T. ON NONE ON D 8166K22
UP
Position CENTER
Position DOWN
Position
WITHOUT PALM GUARD FEATURE WITHOUT PALM GUARD FEATURE
WITH PALM GUARD FEATURE WITH PALM GUARD FEATURE
INDUSTRIAL ROCKER SWITCH INDUSTRIAL ROCKER SWITCH
20A, 125V ac
20A, 250V ac
1Hp, 125V ac
2 Hp, 250V ac
20A, 125V ac
20A, 250V ac
1Hp, 125V ac
2 Hp, 250V ac
20A, 125V ac
20A, 250V ac
1Hp, 125V ac
2 Hp, 250V ac
20A, 125V ac
20A, 250V ac
1Hp, 125V ac
2 Hp, 250V ac
QRatings listed for 125V ac also apply at 28V dc. Also supplied with a 20A, 277V ac rating as standard.
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.18
4.19
Butt action contact mechanism
designed specifically for use
on ac and low voltage
dc applications.
Contact Material:
Locking Rocker
Movable — Silver plated
copper with cad-oxide contact
face button.
Stationary — Copper with
cad-oxide contact face button.
Industrial Rocker Switch
Movable — Copper
silver plated.
Stationary — Bronze
silver plated.
Terminal Types:
Locking Rocker
.250″spade terminals
are standard.
Industrial Rocker Switch
Screw Terminals — Brass
designed to accept
#5-40 x 1/4″binding head
(Cat. No. 811-14) screws.
Furnished unassembled.
Mounting Means:
Industrial Rocker Switch
Flush — Four holes (.098″)
dia. Designed for use with
#4 plastite screw.
Rocker Material:
Locking Rocker
Custom styled, red
thermoplastic rocker key with
“REMOVE TO LOCK” across the
top of the key in raised letters.
Dielectric:
Locking Rocker
1000V RMS minimum.
Approvals:
UL Recognized.
CSA Certified.
Contact your local Eaton Sales
Representative for Selection Information
and Optional Features. 4
Cavity For Optional
Coring Only
20.57
(.810)
12.45
(.490) Max.
39.12 (1.540)
45.97 (1.810) 2.29
(.090)
Dia. 4 Hole
33.53 (1.320) Max.
14.22 (.560)
23.11
(.910) 8.89
(.350)
7.11 (.280)
47.50 (1.870)
#5 – 40 x 1/4 Lg.
Binding
Head Screw
52.58 (2.070) Max.
45.97 (1.810) Ref.
3.05 (.120) Dia.
2 Holes
14.22
(.560)
DIMENSIONS APPROXIMATE IN MM (INCHES)
INDUSTRIAL ROCKER SWITCH
8630K50
Industrial Rocker
8166K27
Locking Rocker without Palm Guard
8166K21
Locking Rocker with Palm Guard
27.43
(1.080)
43.18
(1.700)
11.18
(.440) 18.92
(.745)
24.38
(.960)
16.51 (.650)
6.35
(.250)
36.83
(1.45)
Recommended
Panel Cut Out
Dimensions
17.27 (.680)
21.08 (.830)
30.23
(1.19)
18.90
(.744) 5.72 (.225)
24.38 (.960)
18.92
(.745)
16.51 (.650)
43.18
(1.70)
24.38
(.960)
27.43
(1.08)
11.18
(.440)
6.35
(.250)
36.83
(1.45)
Recommended
Panel Cut Out
Dimensions
17.27 (.680)
21.08 (.830)
30.23
(1.19)
LOCKING ROCKER SWITCH WITHOUT PALM GUARD
LOCKING ROCKER SWITCH WITH PALM GUARD
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.19
SPECIAL DEVICES AND ACCESSORIES
4
These completely molded,
ruggedly constructed switch
assemblies are designed
specifically for sump pump and
liquid level applications. All series
feature Quick-make/Quick-break
mechanisms with snap acting butt
contacts. They provide high
reliability and long life at an
economical cost. Currently used in
many pedestal and submersible
type residential sump pumps,
these switches can be supplied to
operate with float type or weight
type actuators.
SPECIFICATIONS
Ratings:
See selection table.
Electrical Life:
Life expectancy in excess of
100,000 on-off cycles.
Circuits:
2PST.
Maintained — For use with float
type actuators.
Momentary — For use with
weight type actuators.
Contact Mechanism:
Quick-make/Quick-break snap
acting butt contact.
Contact Materials:
Movable — Fine silver.
Stationary — Fine silver.
Termination:
All Types — 2 male tabs,
6.33 x .81mm (.250 x .032″)
as line connections.
P edestal Types — 2 additional
wire leads, 95.25mm (3.750″)
long with 6.33mm (.250″)
female connectors.
Submersible Types — 2 additional
wire leads, 95.25mm (3.750″)
long, with approximately
(.085″) dia. female pin connectors
(AMP #42745-1).
General Purpose Type —
2 additional wire leads,
95.25mm (3.750″) long, stripped
10.31mm (.406″) for connecting
with wire nuts.
Termination Materials:
Brass.
Mounting Means:
P edestal Types — Holes in flange
to fit most motor heads.
General Purpose Types —
Universal strap mountings for
pedestal pipe, discharge pipe or
motor head O .D.
Submersible Types — 2 holes for
mounting inside of submersible
pump housing.
Housing and Operating
Lever Material:
Thermoplastic — Meets impact
and flammability requirements of
UL Specification #746 as applied
in UL Specification #778.
Dielectric Withstand:
2000V RMS for 60 seconds.
Operating Temperature Range:
-17.8°C to +65.6°C
(0°F to + 150°F).
Operating Force:
Float Activated Switches —
2-8 ounces to open and
close contacts.
Submersible Switches —
8-12 ounces to open and
close contacts.
Weight Activated Switches —
2.8 ounces minimum to “ON”.
12.2 ounces maximum to “OFF”.
Approvals:
UL Recognized, CSA Certified.
4.20
Sump Pump Switches — AC Rated
SUMP PUMP SWITCH SELECTION TABLE
10A, 125V ac
5A, 250V ac
1/2 Hp, 125V ac
Rating Circuit Type How Housing Lever Terminal Lever Position Catalog
Activated Profile Type Connector WFor “ON” Number
Pedestal Weight High Long .250″Female Up 8980K44
2 P.S.T. Pedestal Float High Long .250″Female Up 8980K49
Pedestal
Q
Float High Long .250″Female Up 8980K50
Submersible — Low Short Pin Type Down 8980K55
2 P.S.T. Submersible — Low Short Pin Type Up 8980K147
General Purpose Float — Long 2 Wire Leads Up 8980K148
2 P.S.T. General Purpose Weight — Long 2 Wire Leads Up 8980K60
12A, 125V ac
6A, 250V ac
1/2 Hp, 125-250V ac
10A, 125V ac
5A, 250V ac
1/2 Hp, 125V ac
QElongated hole provided in base mounting.
WSee terminal information.
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.20
8980K44
Pedestal
4
4.21
8980K55
Submersible
7.92 (.312) Dia.
20.57
(.810) 5.16
(.203)
33.02 (1.300)
91.44
(3.060)
69.85 (2.750)
20.57
(.810)
4.75 (.187)
33.02 (1.300)
31.75
(1.250)
43˚
Ref.
11.10 (.437)
4.78 (.188) Dia.
2 Holes
2-6.35 (.250) Wide X .81 (.032) Deep
Quick Connect Tabs
30˚
Contacts open,
this position
operating force
2 oz. min.-7 oz. max.
Float Switch Type
10.67
(.420)
6.35
(.250) 9.40 (.370)
23.11 (.910)
37.34 (1.470)
Weight
Switch Type
2 Female terminals for
6.35 (.250) X .81 (.032)
Q.C. terms.
PEDESTAL TYPE WEIGHT/FLOAT SWITCH
47.45
(1.868)
22.94
(.903)
55.55
(2.187)
44.20
(1.740) 4.75
(.187)
Dia. (2)
Holes
20.04
(.789)
2-.250 Wide X .032 Deep
Quick Connect Tabs
2-Female terminals for pin
type quick connect to tabs.
(AMP 427-42745-1)
30˚
Total Throw
35.05
(1.380)
9.37
(.369)
28.96
(1.140)
5.59
(.220)
SUBMERSIBLE TYPE SWITCH
R 71.37
(R 2.810) 25.40
(1.000)
R 106.68
(R 4.200)
55.55
(2.187)
34.93
(1.375)
34.93
(1.375)
47.45
(1.868)
55.55
(2.187)
3.18
(.125)
Mounting
bracket
for 1-1/4 -
1-1/2
dia. pipe
74.02
(2.914)
56.34
(2.218) Heyco
Strain
Relief
Bushing
#1207, Black
30˚
Total
Throw
38.86
(1.530)
WEIGHT/FLOAT SWITCH GENERAL PURPOSE TYPE SWITCH
DIMENSIONS APPROXIMATE IN MM (INCHES)
8980K60
General Purpose
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.21
SPECIAL DEVICES AND ACCESSORIES
4
DESCRIPTION
All bushing mounted switches are
furnished with two mounting nuts.
One nut is mounted behind the
panel to prevent the bushing
sleeve from being distorted if the
front panel is overtightened.
Eaton accepts no responsibility for
damage to switches mounted
without the backup nuts.
4.22
Mounting Hardware for One Hole Mounting Switches
C
D
A
B
A
C
CA
B
A
C
C
A
CA
B
CA
B
CA
B
B
C
A
1.09
(.043) 12.07
(.475)
1.27
(.050)
1.60
(.063)
2.77
(.109)
0.79
(.031)
0.79
(.031)
18.26 (.719)
HEXAGON LOCKNUTS KNURLED FACENUT KNURLED NUT CHAMFERED DRESS NUT KNURLED DRESS NUT
OR FACENUTS WITH SHOULDER CATALOG NO. 15-994-2 CATALOG NO. 15-189-5
KNURLED DRESS NUT DRESS NUT PLAIN INTERNAL TOOTH LOCKING
CATALOG NO. 15-1048-3 CATALOG NO. 15-2523-4 WASHER LOCKWASHER RING
MOUNTING HARDWARE SELECTION TABLEQ(BOLD FACE TYPE INDICATES ITEMS NORMALLY IN DISTRIBUTOR STOCK)
Size Description Material
Dimensions mm (inches)
Thickness Inside O.D. or Dim. Dim. Across Catalog
(Dim. A) Diameter Across Flats Corners Number
(Dim. B) (Dim. C) (Dim. D)
DIMENSIONS APPROXIMATE IN MM (INCHES)
15/32-32
3/8-27 Nickel Plated Brass 3.18 (.125) — 14.27 (.562) 15.88 (.625) 15-2526-2
3/8-24 Bright Nickel Plated Brass 3.18 (.125) — 14.27 (.562) 15.88 (.625) 15-2525-6
11/32-32 Nickel Plated Brass 1.60 (.063) — 12.01 (.473) 13.49 (.531) 15-2525-2
Zinc-Chromate Treated 1.91 (.075) — 15.88 (.625) — 15-192
Hexagon Locknut Bright Nickel Plated Brass 1.98 (.078) — 13.87 (.546) 15.88 (.625) 15-2525-58
Nickel Plated Brass 1.98 (.078) — 13.87 (.546) 15.88 (.625) 15-2525-59
Zinc-Chromate Treated 4.76 (.188) 19.89 (.783) 25.80 (1.125) — 15-2528-2
Hexagon Facenut Nickel Plated Brass 1.98 (.078) — 14.27 (.562) 16.66 (.656) 15-966-2
Semi-Lustre Nickel Plated Brass 1.98 (.078) — 14.27 (.562) 16.66 (.656) 15-966-6
Bright Nickel Plated Brass 1.68 (.066) — 14.27 (.562) — 15-124F1
Knurled Facenut Black Cupric Oxide Plated Brass 1.68 (.066) — 14.27 (.562) — 15-124F5
Nickel Plated Brass 2.77 (.109) — 15.88 (.625) — 15-90
Chamfered Dress Nut Bright Nickel Plated Brass 3.84 (.151) 7.92 (.312) 17.45 (.687) — 15-994-2
Standard Knurl Nut with Shoulder Nickel Plated Brass 2.77 (.109) — 15.06 (.593) — 15-2534-14
Dress Nut Satin Chrome Plated Brass 3.18 (.125) — 14.27 (.562) — 15-2523-4
Black Nylon 4.75 (.187) 9.91 (.390) 16.26 (.640) — 15-1048-3
Knurled Dress Nut Chrome Plated Brass 4.75 (.187) 7.92 (.312) 16.26 (.640) — 15-189-5
3/4-32 Hexagon Facenut Nickel Plated Steel 2.36 (.093) — 23.80 (.937) 27.38 (1.078) 15-1043
#8-40 Hexagon Locknut and F acenut Nickel Plated Steel 1.52 (.060) — 6.22 (.245) 5.49 (.216) 15-1047
For 9.53 (.375″) Bushing Steel 0.69 (.027) 9.65 (.380) 18.29 (.720) — 16-4183-3
For 9.98 (.393″) Bushing Stainless Steel 1.24 (.049) 3.05 (.120) 7.14 (2.810) — 16-4183-6
Plain Washer Cadmium Plated Steel 0.79 (.031) 12.29 (.484) 19.05 (.750) — 16-1382
For 15/32 Bushing Internal Tooth Lockwasher Cadmium Plated Steel 0.53 (.021) 11.96 (.471) 15.06 (.593) — 16-3557
Locking Ring Zinc Plated Steel 1.02 (.040) 12.07 (.475) 18.24 (.718) — 29-761-5
Hexagon Locknut
Flat Washer
QHardware items are sold for use with Eaton switches only. Minimum ordering quantity on all items is 100.
MOUNTING NUTS MOUNTING NUTS
MOUNTING WASHERS AND LOCKING RING MOUNTING WASHERS AND LOCKING RING
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.22
4
4.23
Snap-On Pushbutton Caps — Standard
APPLICATION TABLEQ
Switch
Catalog
Number
Catalog Numbers
Locknut Facenut Lockwasher Locking Terminal
Ring Screws
7070-7073 15-192 15-124F1 — — 811-2
7320-21 15-192 15-966-2 — — 811-14
7300-7317 — 15-966-6 — — 811-2
7360-61 15-192 15-966-2 — — 811-161
7402 15-192 15-966-2 — — 11-1766
7500-7510 15-192 15-124F1 — — 811-2
7546-7548 15-192 15-124F1 — — 811-2
7560-71 15-192 15-124F1 — — 811-2
7576 15-192 15-124F1 — — 11-1369
7580-87 15-192 15-124F1 — — 811-2
7590-97,99 15-192 15-124F1 — — 811-2
7630-32 15-192 15-124F1 — — 811-2
7660-7670 — 15-966-2 16-886 29-761 11-1893
7690-95 15-192 15-124F1 — — 811-2
7700-05 15-192 15-966-2 — — 811-2
7800-7805 15-192 15-124F1 — — 811-2
7810 — — — — 11-6106
7811 — — — — 11-6074-4
7812-7813 — — — — 11-6074-11
7814-16 — 15-1043 — — 11-6100
7818 — — — — 11-6074-4
7835-36 15-192 15-124F1 — — —
7842K2, K3 15-2525-58 — — — 11-6085-2
7846 15-2525-59 — — — —
7990-92 15-192 15-966-2 — — 811-2
8004-05 — — — — 811-2
8054-8057 — — — — 811-2
Switch
Catalog
Number
Catalog Numbers
Locknut Facenut Lockwasher Locking Terminal
Ring Screws
8130-8166 — — — — 811-2
8194 — — — — 11-1766
8261-62 — 15-966-6 16-886 — —
8280, 90, 95 15-192 15-124F1 — — 11-26
8282,83,92,97 15-192 15-124F1 — — 11-26
8307 — — — — 11-26
8337 — — — — 811-161
8370-75 15-192 15-124F1 — — 11-26
8381-82,86,91,96 15-192 15-124F1 — — 11-26
8406 — — — — 11-26
8410 — — — — 811-7206
8411, 18 15-192 15-966-2 — — 811-7206
8432-35 15-192 15-124F1 — — 811-2
8440 15-192 15-124F1 — — 11-26
8442-45 15-192 15-124F1 — — 811-2
8448 15-192 15-966-2 — — 811-2
8690 15-192 15-966-2 — — 811-7248
8800-8860 — 15-966-6 16-886 29-761 11-1893
8928K478-482 15-192 15-124F1 — — 11-26
8928K492-495 15-192 15-994-2 — — —
8980 — — — — W
SA37 15-192 ————
QThe Application Table lists the original equipment hardware supplied.
WContact Customer Service Center. See back cover.
APPLICATION TABLE APPLICATION TABLE
DESCRIPTION
These snap-on pushbutton
caps are made of molded
plastic for use with grooved
style switches. They are
ordered separately for
user assembly.
15.88
(.625)
6.35
(.250)
6.35
(.250)
12.70 (.500)
CAT. NO. 35-3338 CAT. NO. 53-3338-2
SELECTION TABLE
Black Molded 15.88 (.625) 53-3338
Red Molded 15.88 (.625) 53-3338-2
Description Button Diameter Catalog
mm (inches) Number
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.23
Rotary Keylock Brackets — Security Tumbler Type
Keys For Locking Switches
Decorator Facenuts
SPECIAL DEVICES AND ACCESSORIES
4
DESCRIPTION
This series of rotary keylock
is designed for use in security
applications. They provide a
simple method of converting
1 and 2 pole toggle switches. For
use with 2 or 3 position switches.
SPECIFICATIONS
Bushing:
7/8″Dia., 24 threads/inch.
Mounting Hardware and Keys:
1 hexagon locknut
(Cat. No. 15-2528-2) and 1 bright
chrome plated dress nut
(Cat. No. 15-2528-2). Furnished
unassembled. Plus 2 keys
(Cat. No. 13-8171).
Finish:
Lock Bushing — Diecast zinc.
Lock Barrel and Dress Nut —
Chrome plated brass.
Keys — Brass.
4.24
DESCRIPTION
Additional keys may be ordered
from the table below.
Key styles below match those
listed for specific switches in the
keylock section on pages 4.14.
13-5496 13-8171 13-8173
KEYS SELECTION TABLE
General Purpose & 13-5496
Heavy Duty Series
Security Locking 13-8171
Bracket
Heavy Duty Series 13-8173
Where Used Catalog No.
KEYS SELECTION TABLE
Key removable in 8980P25
counter -clockwise position
Key removable in 8980P26
center position
Key removable in 8980P27
clockwise position
Key removable in either 8980P28
extreme position
Where Used Catalog No.
SELECTION TABLEQ
Knurled Facenuts Black 15-1048-3
Brite Clear 15-1048-7
Beveled Facenuts Brite Black 15-1049-3
Brite Clear 15-1049-7
Type Color Catalog Number
20˚
11.13
(.438)
Dia.
Hole
15.88
(.625)
1.60
(.063)
Dia.
11.13
(.438)
Dia.
Hole
15.88
(.625)Dia.
CAT. NO. 15-1048 CAT. NO. 15-1049
19.05
(.750)26.21 (1.032)
- 24 T.P.I.
(22.23)
7
8
8980P27
DIMENSIONS APPROXIMATE IN MM (INCHES)
QDecorator Facenuts for designer line and 15/32″bushing switches, 15/32-32 thread.
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.24
The dust protection assembly
(Cat. No. 8916K693) consists
of neoprene washer and cap
nut. It is recommended for use
with tool handle switches that
have a 15/32″bushing
(Cat. No. 7320-7322,
7360-7361).
•P revents moisture and
contaminants from entering
panel enclosure.
•Behind panel mounting.
•Stainless steel cup washer
assures proper seating of
silicone rubber seal.
•Seal withstands 20 psi
water pressure.
•Cat. No. 32-341.4.25
Dust Protection Cap Nut Assembly
Replacement Terminal Screws
Indicating Plates
Panel Seal
SELECTION TABLEQ
#5-40 x 1/8″11-1117
#5-40 x 5/32″11-26
#5-40 x 3/16″Binding Head 811-7206
#5-40 x 1/4″Binding Head 811-14
#6-32 x 3/16″Binding Head 811-2
#6-32 x 1/4″Binding Head 811-161
#6-32 x 1/4″Binding Head 811-7248
#6-32 x 1/4″Pan Head — Brass 11-1893
#6-32 x 3/8″Binding Head 811-129
#8-32 x 3/16″Binding Head 11-1618
#8-32 x 1/4″11-1369
#8-32 x 1/4″811-408-2
#8-32 x 3/8″Binding Head 11-1766
#8-32 x 3/8″Binding Head 11-6074-4
#6-32 x 7/32″Binding Head 11-6085-2
Screw Size Catalog Number Q
SELECTION TABLEQ
ON OFF .320″Steel Burnished Nickel 30-5632-4
ON OFF .032″Steel Burnished Nickel 30-5632-13
Keyway Location Marking Material Finish Catalog Number
Opposite Keyway Keyway Side
.072
.082
.427
.432
.467
.472
1/16" Lettering (located on angular surface).
Dia.
Silicone
Rubber
.105
.120
.670
.650
Cupwasher
Stainless Steel
Dia. Thickness of
brusning seal is
reduced to .080
when mounted to panel.
32-341
QHardware items are sold for use with Eaton Switches only.
QIndicating plates for 15/32″bushing mounted switches.
OFF
ON
ANeoprene
Washer
A VIEW A - A
CAT. NO. 8916K693
4
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.25
Accessories for EURO/SR, FULL SIZE, ESPORT and NGR Rockers
SPECIAL DEVICES AND ACCESSORIES
4
ESPORT Connector
Catalog Number 28-5558
locations 1, 2, 3, 4, 5, and 6 accept
Packard 12015870 Metri-Pack Terminals.
Location 7 And 8 accept Packard
12034046 Metri-Pack Terminals.
3
2
1
7
6
5
4
8
Retaining hinge functions to keep parts intact
through shipment and handling. Fracture of the
hinges does not affect form, fit, or function of
the connector and its terminal retention features.
Dimension applies at
base of snap leg
43.10 ± .51
(1.697)
23.11 ± .51
(.910)
35.36 ± .38
(1.392)
43.21 ± .51
(1.701)
55.37 ± .51
(2.180)
ESPORT CONNECTOR
7
4
5A
5B
6
8
NGR Connector
Catalog Number 28-5637-2 accepts
Packard 12015870 Metri-Pack Terminals
or AMP compatible connector 28-5940
accepts AMP terminals 42100-2.
33.78 ± .13
(1.335)
24.38 ± .76
(.962) 45.97 ± 1.52
(1.815)
47.50 ± 1.52
(1.877)
24.13 ± .13
(.954)
7
4
5A
5B
6
8
NGR Connector
Catalog Number 28-5637-2 accepts
Packard 12015870 Metri-Pack Terminals
or AMP compatible connector 28-5940
accepts AMP terminals 42100-2.
33.78 ± .13
(1.335)
24.38 ± .76
(.962) 45.97 ± 1.52
(1.815)
47.50 ± 1.52
(1.877)
24.13 ± .13
(.954)
NGR CONNECTOR
35.56 (1.400)
24.79 (.976)
35.56 (1.400) 31.88 (1.255)
23.11 (.910)
17.73
(.698)
20.62
(.812)
20.62
(.812)
55.37 (2.180)
EURO-LOOK and EURO/SR Connector
Catalog Number 28-3426 accepts
Packard 12015870 Metri-Pack Terminals
EURO-LOOK AND EURO/SR CONNECTOR
DIMENSIONS APPROXIMATE IN MM (INCHES)
4.26
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.26
22.02
(.867)
26.16
(1.03) 52.32
(2.06) R 3.18
(R .125)
R 4.75
(R .187)
R 4.19
(R .165)
48.18
(1.897) End
Bezel
(2) End Bezels (2) End Bezels And (1) Center Bezel
44.02
(1.734)50.80
(2.00)
3.81
(.150)
30.48
(1.20)
25.63
(1.009)
12.55
(.494)
16.79
(.661)
57.91
(2.28)
Panel Opening
For 2 End
Bezels
Panel Opening
For 2 Ends and 1 Center Bezel
EURO-LOOK
NGR
17-19264
17-21160
Bezel Catalog Numbers
17-19263
17-21159
End Center
Panel Opening
Reference Only
Thickness: 1.0 to 2.0 to 3.0
(.039 to .078 to .118)
Dimensions: 51.46 (2.026 +.254 –.000) plus
number of center bezels times 1.030
Tolerence: +.254 –.000 for each center
bezel up to a maximum of +.050
48.26
+.51
–.00
77.62
(3.056)
–.00
(2.026)
+.25
51.46
48.26
(1.900)
+.51
–.00
(1.900)
+.51
–.00
GANG MOUNTING SYSTEM
DIMENSIONS APPROXIMATE IN MM (INCHES)
AC
B
E
35.05
(1.38)
(26.01
1.024)
21.51
(.847)
38.86
(1.53)
50.04
(1.97)
Panel plug Catalog Number 17-19544-2
For use with Euro-Look and ESPORT.
NGR panel plug Catalog Number 17-21543
Part will also fit Eaton
gang mounting boxes.
Catalog Number
17-19263 and 17-19264.
Bottom
View
D
44.04
22.02
Panel Opening
Reference Only
Thickness:
.76 to 4.83mm
(.030 to.190)
+.13
–.00
(1.734)
(.867)
+.13
–.00
Euro-Look/
Esport
2.03
(.080)
A
B
C
D
E
2.54
(.100)
R 2.03
(R .080)
8.51
(.335)
13.97
(.550)
R 6.35
(R .250)
R 1.52
(R .060)
8.64
(.340)
13.46
(.530)
R 3.96
(R .156)
NGR
EURO-LOOK, ESPORT & NGR PANEL PLUGS
R 3.96
(R .156)
44.07 ± .31
(1.735)
Panel
Opening
Top
View
16.66
(.680) 21.08
(.830)
30.23
(1.190)
36.83
(1.450)
20.83 ± .13
(.820)
16.51
25.02 ± .20
(.985)
3.30 ± .25
(.130)
Panel plug Catalog Number 53-3318
For use with EURO/SR
31.88
36.25 ± .13
(1.427)
Panel Opening
Reference Only
Thickness: 1.01 to 3.55
(.040 to .140)
Best Results Obtained From:
2.03 to 3.17
(.080 to .125)
+.25
–.03
(1.255)
+.25
-.02
(.650)
EURO/SR PANEL PLUGS
4.27
4
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.27
SPECIAL DEVICES AND ACCESSORIES
4
4.28
Rocker, Toggle and Pushbutton Switch Circuit Diagrams
LEGENDS
ROCKER, TOGGLE AND PUSHBUTTON SWITCH LEGEND
Contact Terminal — will make contact with switch lever
Isolated Terminal — does not make contact with lever
Center terminal and switch lever
Bulb
Momentary Contact
Denotes mechanical contact portion
ROCKER, TOGGLE AND PUSHBUTTON CIRCUIT DIAGRAMS
Circuit
Letter Schematic
A
(1 P.S.T.)
B
(1 P.D.T.)
C
(2 P.S.T.)
D
(2 P.D.T.)
E
(4 P.S.T.) Q
F
(4 P.D.T.)W
G E
(1 P.S.T.)
H R
(1 P.D.T.)
3
2
6
5
2
3
15
6
4
3
26
59
812
11
2
3
15
6
48
9
711
12
10
3
24
6
3
24
6
Circuit
Letter Schematic
I
(2 Circuit)T
J
(1 P.S.T.)
K
(1 P.D.T.)
L
(2 P.S.T.)
M
(2 P.S.T.)
N Y
(2 P.D.T.)
P
(1 P.D.T.)
Q U
(2 Circuit)
36
14
4
31
2
1 3
2 4
B
AC
C
NC NO
G
H
NONC
QPoles 11 and 12 may be eliminated for 3poledevices.
WPoles 10, 11 and 12 may be eliminated for 3pole devices.
EDependent Lamp.
RIndependent Lamp.
TTwo Circuit — Indicates a special type of double throw switch in which the two circuitsbeing controlled
may be independentofeachother.
YFor 206 Series, an additional lamp is available.
UAvailable in 1PDT or 2PDT.
TERMINAL IDENTIFICATION
When specified on order, switches
will have the terminals identified as
shown in the illustration at right.
Terminal markings will be
ink-stamped on the side of the
switch case and unused terminal
positions will not be identified.
All views are rear of switch with
keyway or flat down as applicable.
Terminal numbers 2, 2 & 5, and
5& 8 are considered inboard
terminals for single, two and four
pole switches respectively. All
others are considered outboard.
TERMINAL MARKINGS
1
2
Single Pole
3
1
2
Double Pole
3
4
5
6
1
2
Four Pole
3
4
5
6
7
8
9
10
11
12
3
2
2
3
1
Connection Points Single Pole
Connect Common to Terminals 2
Connect Circuit “A” to Terminals 6
Connect Circuit “B” to Terminals 4
Connect Circuit “C” to Terminals 1
3 “ON”
Independent No.
of
Poles
Circuit with Lever in
Circuit A Circuit B Circuit C
213
546
UP
Position CENTER Position
(Maintained) DOWN Position
(Keyway)
1P3T 1
“THREE INDEPENDENT” ON-ON-ON CIRCUIT DIAGRAM
Note:For switch modified with “Three Independent” ON-ON-ON Special
Circuit. ExternalJumpersare required. Converts 2PDT to 1P3T or 4PDT to
2P3T. Userto connect wiring per instructions given below.
213
546
213
546
See page 4.29 for 92, Midsize and Elite Circuit Diagrams.
See pages 1.41-1.45 for NGR Circuit Diagrams.
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.28
4
4.29
Rocker Switch Circuit Diagrams
92, MIDSIZE AND ELITE SERIES CIRCUIT DIAGRAMSQ
Schematic
Circuit with Rocker in
1ON NONE OFF
(1 P.S.T.)
2ON NONE OFF
(1 P.S.T.)
3ON* NONE OFF
(1 P.S.T.)
4ON NONE OFF*
(1 P.S.T.)
5ON NONE ON
(1 P.D.T.)
6ON OFF ON
(1 P.D.T.)
7ON NONE ON*
(1 P.D.T.)
8ON* OFF ON
(1 P.D.T.)
9ON* OFF ON*
(1 P.D.T.)
18 ON NONE OFF
(1 P.S.T.)
19 ON NONE OFF
(1 P.S.T.)
20 ON NONE OFF
(1 P.S.T.) W
21 ON* NONE OFF
(1 P.S.T.)
22 ON NONE OFF*
(1 P.S.T.)
23 ON NONE ON
(1 P.D.T.)
24 ON OFF ON
(1 P.D.T.)
25 ON NONE ON*
(1 P.D.T.)
1
2
11
12
1
2
1
2
1
23
1
32
1
32
1
32
* Momentary contact.
Q Terminal numbers 1, 2 and 3 denotes single pole base.
Terminal numbers 11, 12, 13, 24, 25 and 26 denotes double pole base.
W Single pole in double pole base with lamp independently wired.
E Double Pole — Independently wired lamp.
UP
Position CENTER
Position DOWN
Position Schematic
Circuit with Rocker in
11 24
12 25
11 24
12 25
11 24
12 25
11 24
12 25 2613
11 24
13 26 25
12
11 24
13 26 25
12
11 24
13 26 2512
11 24
13 26 2512
UP
Position CENTER
Position DOWN
Position
NON-ILLUMINATED NON-ILLUMINATED
ILLUMINATED ILLUMINATED
10 ON NONE OFF
(2 P.S.T.)
11 ON* NONE OFF
(2 P.S.T.)
12 ON NONE OFF*
(2 P.S.T.)
13 ON NONE ON
(2 P.D.T.)
14 ON OFF ON
(2 P.D.T.)
15 ON NONE ON*
(2 P.D.T.)
16 ON* OFF ON
(2 P.D.T.)
17 ON* OFF ON*
(2 P.D.T.)
26 ON OFF ON*
(1 P.D.T.)
27 ON OFF ON*
(2 P.S.T.)
28 ON NONE OFF
(2 P.S.T.)
29 ON NONE OFF
(2 P.S.T.) E
30 ON* NONE OFF
(2 P.S.T.)
31 ON NONE OFF*
(2 P.S.T.)
32
(Indicator)
1
32
12
3
11 24
12
11 25 26
12
12
3
11 13
12
24 13
25 26
24
26 25
13
24
26 25
13
26
24
25
13
26
24
25
13
12 25
24
11
11
13 26
12
24
25
12 25
24
11
12 25
2411
32
Circuit
Number
(Circuit
Designation)
Circuit
Number
(Circuit
Designation)
59-01 Special Devices Section 4 1/28/99 2:19 PM Page 4.29
