TQQ7307 2535 MHz LTE Band 7 Uplink BAW Filter Applications * LTE Band 7 Uplink Infrastructure * Base Station * General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features * * * * * * * * Functional Block Diagram 70 MHz Bandwidth High Attenuation Low Loss 50 Ohm Input/Output Impedance Single-ended Operation Small Size: 3 x 3 x 1.02 mm Surface Mount Device RoHS Compliant, Pb-Free 1 Ground 6 Ground Input 2 5 Output Ground 3 4 Ground Top View General Description Pin Configuration The TQQ7307 is a general purpose uplink BAW filter for LTE Band 7. This filter is housed in a compact 3 x 3 mm package for base station applications. Low insertion loss, coupled with high attenuation makes this filter an ideal choice for uplink RF filtering needs. Pin No. Label 2 5 1,3,4,6 Input Output Ground The TQQ7307 is part of TriQuint's extensive portfolio of RF BAW and SAW filters. Ordering Information Part No. Description TQQ7307 TQQ7307-EVB 2535 MHz BAW Filter Evaluation board Standard T/R size = 2500 pieces on a 7" reel Advanced Datasheet: Rev B 07-16-14 (c) 2014 TriQuint - 1 of 8 - Disclaimer: Subject to change without notice www.triquint.com TQQ7307 2535 MHz LTE Band 7 Uplink BAW Filter Absolute Maximum Ratings Parameter Recommended Operating Conditions Rating Storage Temperature RF Input Power (CW, +55C for 10,000 hours) -40 to +95C +30 dBm Parameter Min TCASE -40 Typ Max Units +85 C Electrical specifications are measured at specified test conditions. Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications (1,2,3) Test conditions unless otherwise specified: Temp. +25 C, ZS=ZL=50 Ohms Parameter Conditions Pass Band Frequency Center Frequency 3.5 dB Bandwidth Maximum Insertion Loss Amplitude Variation(5) Group Delay Variation(6) Group Delay Variation(6) Input VSWR Output VSWR Stopband Attenuation (relative to zero dB) Source/Load Impedance (7) Min 2500 - 2570 MHz 2500 - 2570 MHz 2500 - 2570 MHz Any 5 MHz band in passband 2500 - 2570 MHz 2500 - 2570 MHz 0.9 - 1100 MHz 1100 - 2170 MHz 2170 - 2260 MHz 2260 - 2450 MHz 2450 - 2480 MHz 2590 - 2620 MHz 2620 - 2690 MHz 2690 - 2900 MHz 2900 - 3800 MHz 3800 - 5000 MHz 5000 - 6000 MHz Single ended 2500 36 30 38 32 12 8 40 40 30 13 - Typ(4) Max 2535 83 2.0 0.9 14 7 1.9:1 1.8:1 40 34 45 39 20 12 48 47 37 17 4 50 2570 3.5 2.4 30 13 2.4:1 2.4:1 - Units MHz MHz dB dB ns p-p ns p-p - dB Ohms Notes: 1. All specifications are based on the TriQuint schematic for the main reference design. 2. Production test is performed at room temp. to a guard-banded specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the design to account for variation due to temperature drift and manufacturing tolerances. 4. Typical values are based on average measurements at room temperature of 25C. 5. This is defined as the difference between the maximum and minimum insertion loss within the specified band. 6. This is defined as the worst case difference between a peak and adjacent valley within defined frequency points. 7. This is the optimum impedance in order to achieve the performance shown. Advanced Datasheet: Rev B 07-16-14 (c) 2014 TriQuint - 2 of 8 - Disclaimer: Subject to change without notice www.triquint.com TQQ7307 2535 MHz LTE Band 7 Uplink BAW Filter TQQ7307-PCB Evaluation Board 2 Q7307 50 5 1,3,4,6 Single-ended Input 50 Single-ended Output Bill of Material - TQQ7307-PCB Reference Des. U1 n/a n/a Value n/a n/a n/a Description Manuf. Part Number 2535 MHz BAW Filter Printed Circuit Board SMA Edge Connector TriQuint TriQuint Radiall TQQ7307 960700 9602-1111-018 Evaluation Board PCB Information Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Advanced Datasheet: Rev B 07-16-14 (c) 2014 TriQuint - 3 of 8 - Disclaimer: Subject to change without notice www.triquint.com TQQ7307 2535 MHz LTE Band 7 Uplink BAW Filter Performance Plots Test conditions unless otherwise noted: Temp= +25C Frequency Response 0 -1.4 -10 -1.8 -20 d B Passband Response -1 -2.2 -30 d B -40 -2.6 -3 -3.4 -3.8 -50 -4.2 -60 -4.6 -70 2335 2385 2435 2485 2535 2585 2635 2685 2735 -5 2482.5 2500 2517.5 Frequency (MHz) Wideband Response 0 2570 2587.5 2.6 2.2 1.8 -20 1.4 -30 1 2482.5 -40 3 2500 2517.5 2535 2552.5 2570 2587.5 2500 2517.5 2535 2552.5 2570 2587.5 2.6 -50 2.2 1.8 -60 -70 2552.5 Input / Output VSWR 3 -10 d B 2535 Frequency (MHz) 1.4 0 750 1500 2250 3000 3750 4500 5250 6000 1 2482.5 Frequency (MHz) Frequency (MHz) Output Smith Chart Input Smith Chart 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 0 -1 -0 .5 Advanced Datasheet: Rev B 07-16-14 (c) 2014 TriQuint 0 0.5 -1 1 -0 .5 0 -0 .2 -0 .2 -0 .4 -0 .4 -0 .6 -0 .6 -0 .8 -0 .8 -1 -1 - 4 of 8 - 0.5 1 Disclaimer: Subject to change without notice www.triquint.com TQQ7307 2535 MHz LTE Band 7 Uplink BAW Filter Package Marking and Dimensions 3.000.10 2x 0.10 C (5X) 0.650x X 0.600y A 3.000.10 2x 0.10 C A B PIN 1 0.10 C Pin #1 Identifier (1X) 1.400x X 0.600y 0.700 1.071 C A B 0.10 B Q7307 YYWW aXXXX 1.100 3.000.10 3.000.10 1.100 1.075 Package Marking Product Identifier: Q7307 Date Code: YYWW Assembly Code: AaXXXX 0.1000.100 0.1000.100 BOTTOM VIEW TOP VIEW 0.10 C C 1.020.07 3.000.10 SIDE VIEW Notes: 1. All dimensions are in millimeters 2. All tolerances are 0.15 mm except overall length and width 0.10 mm 3. Contact plating : ENIG (Electroless Nickel Immersion Gold) 4. Terminations: 0.5 - 1.0 m Au plating, over a 2 - 6 m Ni plating PCB Mounting Pattern Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Use 1 oz. copper minimum for top and bottom layer metal. Advanced Datasheet: Rev B 07-16-14 (c) 2014 TriQuint - 5 of 8 - Disclaimer: Subject to change without notice www.triquint.com TQQ7307 2535 MHz LTE Band 7 Uplink BAW Filter Tape and Reel Information - Carrier and Cover Tape Dimensions Tape and reel specifications for this part are also available on the TriQuint website. Standard T/R size = 2500 pieces on a 7" reel. Feature Cavity Centerline Distance Cover Tape Carrier Tape Measure Symbol Size (in) Size (mm) Length A0 0.132 3.35 Width Depth Pitch Cavity to Perforation - Length Direction Cavity to Perforation - Width Direction Width Width B0 K0 P1 P2 F C W 0.132 0.055 0.157 0.079 0.138 0.213 0.315 3.35 1.40 4.00 2.00 3.50 5.40 8.00 Advanced Datasheet: Rev B 07-16-14 (c) 2014 TriQuint - 6 of 8 - Disclaimer: Subject to change without notice www.triquint.com TQQ7307 2535 MHz LTE Band 7 Uplink BAW Filter Tape and Reel Information - Reel Dimensions Tape and reel specifications for this part are also available on the TriQuint website. Standard T/R size = 2,500 pieces on a 7" reel. Feature Flange Hub Measure Diameter Thickness Space Between Flange Outer Diameter Arbor Hole Diameter Key Slit Width Key Slit Diameter Advanced Datasheet: Rev B 07-16-14 (c) 2014 TriQuint - 7 of 8 - Symbol Size (in) Size (mm) A W2 W1 N C B D 6.969 0.559 0.346 2.283 0.512 0.079 0.787 177.0 14.2 8.8 58.0 13.0 2.0 20.0 Disclaimer: Subject to change without notice www.triquint.com TQQ7307 2535 MHz LTE Band 7 Uplink BAW Filter Product Compliance Information ESD Sensitivity Ratings Solderability Compatible with both lead-free (260C maximum reflow temperature) and tin/lead (245C maximum reflow temperature) soldering processes. Caution! ESD-Sensitive Device Contact plating: ENIG (Electroless Nickel Immersion Gold) ESD Rating: Value: Test: Standard: Class 1B Passes 500V to < 1000V Human Body Model (HBM) JEDEC Standard JS-001-2012 ESD Rating: Value: Test: Standard: Class B Passes 200V to < 400V Machine Model (MM) JEDEC Standard JESD22-A115 RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: * Lead Free * Halogen Free (Chlorine, Bromine) * Antimony Free * TBBP-A (C15H12Br402) Free * PFOS Free * SVHC Free MSL Rating MSL Rating: Level 3 Test: 260C convection reflow Standard: JEDEC Standard IPC/JEDEC J-STD-020 Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@triquint.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@triquint.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Advanced Datasheet: Rev B 07-16-14 (c) 2014 TriQuint - 8 of 8 - Disclaimer: Subject to change without notice www.triquint.com