Low Signal Relay G5V-1 Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits * High sensitivity: 150 mW nominal power consumption. * Small size at 10 H x 7.5 W x 12.5 L mm. * Switches from 1 mA to 1 A. * Conforms to FCC part 68 requirements for coil to contacts. * Fully-sealed construction. * Ideal for use in telecommunications, security, and computer/peripheral equipment. * RoHS Compliant. RC Ordering Information To Order: Select the part number and add the desired coil voltage rating (e.g., G5V-1-DC12). Terminal Type PCB through-hole Contact form Standard SPDT Contact type Single crossbar Construction Fully sealed Model G5V-1 Model Number Legend G5V - 1 DC 2 3 1. Contact Form 1: SPDT 2. Pickup Voltage % Blank: Standard, 80% of nominal 3. Rated Coil Voltage 3, 5, 6, 9, 12, 24 VDC Specifications Contact Data Load Resistive load (p.f. = 1) Rated load 0.50 A at 125 VAC, 1A 24 VDC Contact material Ag + Au-Alloy Carry current 2A Max. operating voltage 125 VAC, 60 VDC Max. operating current 1A Max. switching capacity 62.50 VA, 30W Min. permissible load (See note) 1 mA, 5 VDC Note: P level: 60 = 0.1 x 10-6/operation This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 100 . This value may vary depending on the operating environment. Always double-check relay suitability under actual operating conditions. Low Signal Relay G5V-1 39 Coil Data Rated voltage (VDC) Rated current (mA) Coil resistance () Coil inductance (Ref. value) (H) Armature OFF Pick-up voltage Armature ON 3 50 60 0.05 0.11 5 30 167 0.15 0.29 6 25 240 0.20 0.41 9 16.70 540 0.45 0.93 12 12.50 960 0.85 1.63 24 6.25 3,840 3.48 6.61 Dropout voltage Maximum voltage % of rated voltage 80% 10% min. 200% at 23C Power consumption (mW) Approx. 150 Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. The operating characteristics are measured at a coil temperature of 23C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil. Characteristics Contact resistance (See note 1) 100 m max. Operate time (See note 2) 5 ms max. (mean value: approx. 2.50 ms) Release time (See note 2) 5 ms max. (mean value: approx. 0.90 ms) Operating frequency (max.) Mechanical 36,000 operations/hour Electrical 1,800 operations/hour Insulation resistance (See note 3) 1,000 M min. (at 500 VDC between coil and contacts, at 250 VDC between contacts of same polarity) Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between coil and contacts 400 VAC, 50/60 Hz for 1 minute between contacts of same polarity 1,500 V (10 X 160 s) between coil and contacts (conforms to FCC Part 68) Impulse withstand voltage Vibration Mechanical durability 10 to 55 Hz, 3.30 mm double amplitude Malfunction durability Shock Mechanical durability 1,000 m/s2 (approx. 100G) Malfunction durability 100 m/s2 (approx. 10 G) Ambient temperature -40C to 70C Humidity 5% to 85% RH Service life Mechanical 5 million operations min. (at 18,000 operations/hour) Electrical 100,000 operations min. (under rated load,1,800 ops/hr) See "Characteristic Data" Weight Approx. 2 g Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method. 2. Values in parentheses are typical values unless otherwise stated. 3. The insulation resistance was measured with a 500-VDC Megohmmeter between coil and contacts and a 250 VDC megohmmeter between contacts with the same polarity applied to the same parts as those for checking the dielectric strength. 4. The above values are initial values. Approvals UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40C Type G5V-1 Contact form SPDT Coil rating 3 to 24 VDC Contact ratings 100,000 0.3 A at 110 VDC (Resistive) 1A at 30 VDC (Resistive) 6,000 Note: In the interest of product improvement, specifications are subject to change. 40 Low Signal Relay G5V-1 Number of test operations 0.5A at 125 VAC (General Use) Characteristic Data Maximum Switching Capacity Electrical Service Life Ambient Temperature vs. Maximum Coil Voltage AC resistive load DC resistive load Maximum coil voltage (%) Service Life (x103 operations) Rated Operating current (A) 5,000 3,000 24-VDC resistive load 1,000 700 500 300 100 70 50 Rated Operating voltage (V) 125-VAC resistive load Rated coil voltage Rated Operating current (A) Ambient temperature (C) Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. Dimensions Note: 1. 2. 3. 4. All units are in millimeters unless otherwise indicated. To convert millimeters into inches, multiply by 0.03937. Numbers in parentheses are reference values. Tolerance: 0.1 Orientation marks are indicated as follows: G5V-1 7.5 max. (7.3)* 12.5 max. (12.3)* Terminal Arrangement/ Internal Connections (Bottom View) Mounting Holes (Bottom View) 2.54 7.62 (1.07) 10 max. (9.9) 0.5 1 10 3.5 5 9 0.3 5.08+0.1 6 (1.11) Six, 1-dia. holes * Average value 0.5 0.3 (1.11) 2 (1.07) 10.16+0.1 0.5 Precautions Long-term Continuously ON Contacts Relay Handling Using the Relay in a circuit where the Relay will be ON continuously for long periods (without switching) can lead to unstable contacts, because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. Be sure to use a fail-safe circuit design that provides protection against contact failure or coil burnout. When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40C. Do not put the Relay in a cold cleaning bath immediately after soldering. Low Signal Relay G5V-1 41 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. X301-E-1b Low Signal Relay 09/11 G5V-1 Specifications subject to change without notice Printed in USA