G5V-1-DC5 - OMRON ELECTRONIC COMPONENTS

Low Signal Relay G5V-1 39

Low Signal Relay

G5V-1

Ultra-miniature, Highly Sensitive SPDT

Relay for Signal Circuits

• High sensitivity: 150 mW nominal power consumption.

• Small size at 10 H x 7.5 W x 12.5 L mm.

• Switches from 1 mA to 1 A.

• Conforms to FCC part 68 requirements for coil to contacts.

• Fully-sealed construction.

• Ideal for use in telecommunications, security, and comput-

er/peripheral equipment.

• RoHS Compliant.

Ordering Information

To Order: Select the part number and add the desired coil voltage rating (e.g., G5V-1-DC12).

Model Number Legend

Specifications

■Contact Data

Note: P level: λ60 = 0.1 x 10–6/operation

This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 100 Ω. This value may

vary depending on the operating environment. Always double-check relay suitability under actual operating conditions.

Terminal Type Contact form Contact type Construction Model

PCB through-hole Standard SPDT Single crossbar Fully sealed G5V-1

Load Resistive load (p.f. = 1)

Rated load 0.50 A at 125 VAC, 1A 24 VDC

Contact material Ag + Au-Alloy

Carry current 2 A

Max. operating voltage 125 VAC, 60 VDC

Max. operating current 1 A

Max. switching capacity 62.50 VA, 30W

Min. permissible load (See note) 1 mA, 5 VDC

1. Contact Form

1: SPDT

3. Rated Coil Voltage

3, 5, 6, 9, 12, 24 VDC

2. Pickup Voltage %

Blank: Standard, 80% of nominal

G5V - - DC

12 3

40 Low Signal Relay G5V-1

■Coil Data

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.

2. The operating characteristics are measured at a coil temperature of 23°C.

3. The maximum voltage is the highest voltage that can be imposed on the relay coil.

■Characteristics

Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method.

2. Values in parentheses are typical values unless otherwise stated.

The insulation resistance was measured with a 500-VDC Megohmmeter between coil and contacts and a 250 VDC megohmmeter between con-

tacts with the same polarity applied to the same parts as those for checking the dielectric strength.

4. The above values are initial values.

■Approvals

UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C

Note: In the interest of product improvement, specifications are subject to change.

Rated

voltage

(VDC)

Rated current

(mA)

Coil

resistance

(Ω)

Coil inductance

(Ref. value) (H)

Pick-up

voltage

Dropout

voltage

Maximum

voltage

Power

consumption

(mW)

Armature OFF Armature ON % of rated voltage

3 50 60 0.05 0.11 80%10% min. 200%

at 23°C

Approx. 150

5 30 167 0.15 0.29

6 25 240 0.20 0.41

9 16.70 540 0.45 0.93

12 12.50 960 0.85 1.63

24 6.25 3,840 3.48 6.61

Contact resistance (See note 1) 100 mΩ max.

Operate time (See note 2) 5 ms max. (mean value: approx. 2.50 ms)

Release time (See note 2) 5 ms max. (mean value: approx. 0.90 ms)

Operating frequency (max.) Mechanical 36,000 operations/hour

Electrical 1,800 operations/hour

Insulation resistance (See note 3) 1,000 MΩ min. (at 500 VDC between coil and contacts, at 250 VDC between

contacts of same polarity)

Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between coil and contacts

400 VAC, 50/60 Hz for 1 minute between contacts of same polarity

Impulse withstand voltage 1,500 V (10 X 160 μs) between coil and contacts (conforms to FCC Part 68)

Vibration Mechanical durability 10 to 55 Hz, 3.30 mm double amplitude

Malfunction durability

Shock Mechanical durability 1,000 m/s2 (approx. 100G)

Malfunction durability 100 m/s2 (approx. 10 G)

Ambient temperature -40°C to 70°C

Humidity 5% to 85% RH

Service life Mechanical 5 million operations min. (at 18,000 operations/hour)

Electrical 100,000 operations min. (under rated load,1,800 ops/hr) See “Characteristic Data”

Weight Approx. 2 g

Type Contact form Coil rating Contact ratings Number of test operations

G5V-1 SPDT 3 to 24 VDC 0.5A at 125 VAC (General Use) 100,000

0.3 A at 110 VDC (Resistive)

1A at 30 VDC (Resistive)

6,000

Low Signal Relay G5V-1 41

■Characteristic Data

Dimensions

Note: 1. All units are in millimeters unless otherwise indicated. To convert millimeters into inches, multiply by 0.03937.

2. Numbers in parentheses are reference values.

3. Tolerance: ±0.1

4. Orientation marks are indicated as follows:

G5V-1

Precautions

Long-term Continuously ON Contacts

Using the Relay in a circuit where the Relay will be ON continuously

for long periods (without switching) can lead to unstable contacts,

because the heat generated by the coil itself will affect the insulation,

causing a film to develop on the contact surfaces. Be sure to use a

fail-safe circuit design that provides protection against contact failure

or coil burnout.

Relay Handling

When washing the product after soldering the Relay to a PCB, use a

water-based solvent or alcohol-based solvent, and keep the solvent

temperature to less than 40°C. Do not put the Relay in a cold clean-

ing bath immediately after soldering.

Maximum Switching Capacity Ambient Temperature vs.

Maximum Coil Voltage

Electrical Service Life

DC resistive load

Rated Operating current (A)

Maximum coil voltage (%)

Rated Operating voltage (V) Ambient temperature (°C)Rated Operating current (A)

Service Life (x10 operations)

resistive

load

125-VAC

resistive

load

24-VDC resistive load Rated coil voltage

Note: The maximum coil voltage refers to the maxi-

mum value in a varying range of operating

power voltage, not a continuous voltage.

100

300

500

700

1,000

3,000

5,000

12.5 max.

(12.3)*

7.5 max.

(7.3)*

10 max.

(9.9) 0.5

3.5

0.5

Terminal Arrangement/

Internal Connections

(Bottom View)

Mounting Holes

(Bottom View)

125

2.54 7.62

(1.07)

(1.11)

Six, 1-dia. holes

5.08+0.1

10.16+0.1

* Average value

0.5

0.30.3

Low Signal Relay G5V-1

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

Cat. No. X301-E-1b Printed in USA

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

09/11 Specifications subject to change without notice

All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which

can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.