125B/NA/S - Fluke - Datasheet.Live

TECHNICAL DATA

Fluke 120B Series Industrial

ScopeMeter® Hand-Held Oscilloscopes

KEY MEASUREMENTS

Voltage, current and power waveforms

with numerical values including harmonics,

resistance, diode, continuity and

capacitance measurements.

AUTOMATICALLY CAPTURE, VIEW AND

ANALYZE COMPLEX WAVEFORMS

Fluke Connect and View™ triggering

automatically displays waveforms without

having to adjust amplitude, timebase and

trigger settings, while Intellaset™ technology

analyzes the signal and automatically

displays critical numerical readings, making

troubleshooting faster than ever.

FLUKE CONNECT

® COMPATIBLE*

View data locally on the instrument,

or via Fluke Connect mobile app.

*Not all models are available in all countries.

Check with your local Fluke representative.

Simplified testing, more insight and faster

electro-mechanical troubleshooting

The compact ScopeMeter® 120B Series, is the rugged oscilloscope

solution for industrial electrical and electro-mechanical equip-

ment troubleshooting and maintenance applications. It’s a truly

integrated test tool, with oscilloscope, multimeter and high-speed

recorder in one easy-to-use instrument. The ScopeMeter 120B

Series also integrates with Fluke Connect® mobile app and

FlukeView® for ScopeMeter software to enable further collabora-

tion, data analysis and archiving of critical test information.

The 120B Series Industrial ScopeMeter Test Tools include innova-

tive functions designed to help technicians troubleshoot faster and

get the answers they need to keep their systems up and running.

Display waveforms with Connect and View™ trigger and setup

technology and automatically view related numerical measure-

ments using Fluke IntellaSet™ technology, all without making

manual measurement adjustments. With Recorder Event Detect

capabilities, elusive intermittent events are captured and logged

for easy viewing and analysis.

• Dual-input digital oscilloscope and multimeter

• 40 MHz or 20 MHz oscilloscope bandwidth

• Two 5,000-count true-rms digital multimeters

• Connect-and-View™ trigger simplicity for hands-off operation

• IntellaSet™ technology automatically and intelligently adjusts

numerical readout based on the measured signal

• Dual-input waveform and meter reading recorder for

trending data over extended periods

• Recorder Event Detect captures elusive intermittent signals on

repetitive waveforms up to 4 kHz

2 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

• Shielded test leads for oscilloscope, resistance and

continuity measurements

• Resistance, continuity, diode and capacitance meter

measurements

• Power measurements (W, VA, VAR, PF, DPF, Hz)

• Voltage, current and power harmonics

• Check Industrial networks with BusHealth physical layer tests

against defined reference levels

• Save or recall data and instrument setups

• Store instrument setups defined by a test sequence for routine

maintenance or most often used test procedures.

• External optically isolated USB interface to transfer, archive

and analyze scope or meter data

• Optional WiFi adapter connected to internal USB port to

wirelessly transfer information to the PC, laptop or

Fluke Connect® mobile app*

• FlukeView® ScopeMeter® Software for Windows®

• Rugged design to withstand 3g Vibration, 30g shock, and

rated IP51 according to EN/IEC60529

• Highest safety rating in the industry: safety rated for

CAT IV 600V

• Li-Ion rechargeable battery, seven-hours operation (with

four-hour charge time)

Connect-and-View™

triggering for an instant,

stable display

Oscilloscope users know how

difficult triggering can be.

Using the wrong settings can

lead to unstable waveform

captures, and sometimes the

wrong measurement data.

Fluke’s unique Connect-and-

View™ triggering technology

recognizes signal patterns, and

automatically sets up the correct

triggering to provide a stable,

reliable and repeatable display.

Connect-and-View™ triggering

is designed to work with virtu-

ally any signal, including motor

drives and control signals—

without adjusting parameters,

or even touching a button.

Signal changes are instantly

recognized and settings are

automatically adjusted, provid-

ing a stable display even when

measuring multiple test points

in quick succession.

IntellaSet™/AutoReading

The Auto Readings function

with Fluke IntellaSet™ technol-

ogy uses proprietary algorithms

to intelligently analyze the

measured waveform and auto-

matically displays the most

appropriate numerical measure-

ments on screen, so you can get

the data you need easier than

ever before. As an example,

when the measured wave-

form is a line voltage signal,

the Vrms and Hz readings

are automatically displayed,

whereas if the measured

waveform is a square wave, the

Vpeak-peak and Hz readings

are automatically displayed.

Using IntellaSet™ technology

in conjunction with Connect-

and-View™ automatic triggering

you can be sure you’re seeing

not only the correct wave-

form, but the appropriate

numerical reading as well. All

without touching a button.

*Not all models are available in all countries. Check with

your local Fluke representative.

Fluke Connect-and-View™ triggering

with Auto Reading function using Fluke

IntellaSet™ technology gives you quick

access to the data you need.

3 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Industrial equipment needs a reliable power supply to

operate properly, use the dual input to obtain key power

measurements.

For single phase or 3-phase balanced systems, the dual inputs

of the Industrial ScopeMeter® 120B Series can measure ac+dc

rms voltage on channel A and ac+dc rms current on channel

B. The Fluke 125B can then calculate; frequency, phase angle,

active power (kW), reactive power (VA or var), power factor (PF)

or displacement power factor (DPF) and can also calculate the

power values for a 3-phase system where all phases have equal

voltage and currents. This applies to both balanced system and

resistive loads.

Easily obtain key power characteristics to validate a system

power.

A single test tool measures volts, ohms,

amps or capacitance, in addition to

displaying waveforms.

One test lead to measure multiple

electrical parameters

High frequency waveform, meter, capacitance and

resistance measurements as well as continuity

checks are all covered by single set of shielded

test leads. No time is wasted finding or swapping

leads.

Harmonic spectrum overview with cursors

to measure the distortion as a percentage

of the fundamental.

FlukeView® ScopeMeter®

Software for Windows®

Get more out of your ScopeMeter

120B with FlukeView®Software:

• Store instrument’s screen

copies on the PC, in color

• Copy screen images into your

reports and documentation

• Capture and store waveform

data from your ScopeMeter

on your PC

• Create and archive wave-

form references for easy

comparison

• Copy waveform data into

your spreadsheet for detailed

analysis

• Use cursors for parameter

measurement

• Add user text to instrument

setups and send them to the

instrument for operator refer-

ence and instructions

Harmonics measurements

Harmonics are periodic distortions of voltage,

current, or power sine waves. Harmonics in

power distribution systems are often caused

by non-linear loads such as switched mode

dc power supplies and adjustable speed motor

drives. Harmonics can cause transformers,

conductors, and motors to overheat. In the

Harmonics function, the Test Tool measures

harmonics to the 51st. Related data such as dc

components, THD (Total Harmonic Distortion),

and K factor are measured to provide a com-

plete insight in to the electrical state of health

of your loads.

4 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Use the comprehensive

recorder modes to help find

intermittent faults with ease

The toughest faults to find are

those that happen only once

in a while—intermittent events.

They can be caused by bad

connections, dust, dirt, corro-

sion or simply broken wiring

or connectors. Other factors,

like line outages and sags or

the starting and stopping of

a motor, can also cause inter-

mittent events resulting in

equipment shutdowns. When

these events happen, you may

not be around to see it. But,

your Fluke ScopeMeter® Test

Tool will. You can either plot the

minimum and maximum peak

measurement values or record

the waveform trace. And, with

expandable micro SD memory,

recording sessions can be done

for up to 14 days. This recorder

is even more powerful with

the addition of Recorder Event

Detect, which makes detect-

ing and logging intermittent

faults easier than ever. Just set a

threshold on a meter reading or

scope trace and deviations are

tagged as unique events. You no

longer need to search through

masses of data to pinpoint faults,

and can quickly step from one

tagged event to the next, while

still having access to the full

data set.

Industrial Bus Health Test

verifies electrical signal

quality on industrial buses

Bus Health Test analyzes the

electrical signals on the indus-

trial bus or network and gives

a clear “Good”, “Weak” or “Bad”

indication mark for each of the

relevant parameters, presented

next to the actual measurement

value. Measured values are

compared to standard values

based on the selected bus types

(CAN-bus, Profi-bus, Foundation

Field, RS-232 and many more),

or, unique reference values

can be set if different toler-

ances are required. The Fluke

125B can validate the quality

of the electrical signals as soon

as they are passed along the

network, without looking at the

data content. Additionally, the

125B checks the signal levels

and speed, transition times and

distortion, and compares these

to the appropriate standards

to help you find errors such as

improper cable connections, bad

contacts, incorrect grounding or

improper terminators.

Quickly understand industrial ﬁeld bus

signal physical layer analog characteristics.

Quickly step through recorded events

to identify and troubleshoot intermittent

faults.

Fluke Connect mobile app

compatibility

Automated industrial machinery

is harder than ever to trouble

shoot. It’s not enough to just

know where you have to test,

you also have to know what to

look for—and that can be hard

without baseline measurement

data or access to subject matter

experts. The Fluke Connect®

Assets wireless system of

software and wireless test tools

enables technicians to reduce

maintenance costs and increase

uptime with accurate equip-

ment records and maintenance

data that is easy to interpret,

and share. Compare and

contrast test point measure-

ment data and trends so you

can better understand signal

characteristics and changes

over time. And, by storing

maintenance data on the Fluke

Cloud™ you can enable team

members to access it from

wherever and whenever they

need to so you can get advice

or approvals in the field and

get your systems up and run-

ning faster than ever before.

5 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Specifications

Oscilloscope mode

Vertical

Frequency response - dc coupled without probes and test leads (with BB120) 123B: dc to 20 MHz (-3 dB)

124B and 125B: dc to 40 MHz (-3 dB)

with STL120-IV 1:1 shielded test leads DC to 12.5 MHz (-3 dB) / dc to 20 MHz (-6 dB)

with VP41 10:1 Probe 123B: dc to 20MHz (-3 dB)

124B and 125B: dc to 40 MHz (-3 dB)

Frequency response - ac coupled

(lf roll off)

without probes and test leads <10 Hz (-3 dB)

with STL120-IV 1:1 shielded test leads <10 Hz (-3 dB)

with VP41 10:1 Probe <10 Hz (-3 dB)

Rise time, excluding probes,

test leads

123B <17.5 ns

124B and 125B <8.75 ns

Input impedance without probes and test leads 1 MΩ//20 pF

with BB120 1 MΩ//24 pF

with STL120-IV 1:1 shielded test leads 1 MΩ//230 pF

with VP41 10:1 Probe 5 MΩ//15.5 pF

Sensitivity 5 mV to 200 V/div

Analog bandwidth limiter 10 kHz

Display modes A, -A, B, -B

Max. input voltage A and B direct, with test leads, or with VP41 Probe 600 Vrms CAT IV, 750 Vrms maximum voltage.

with BB120 600 Vrms

Max. floating voltage, from any

terminal to ground

600 Vrms CAT IV, 750 Vrms up to 400Hz

Horizontal

Scope modes Normal, Single, Roll

Ranges (Normal)

Equivalent sampling 123B: 20 ns to 500 ns/div,

124B and 125B: 10 ns to 500 ns/div

Real time sampling 1 μs to 5 s/div

Single (real time) 1 μs to 5 s/div

Roll (real time) 1s to 60 s/div

Sampling rate (for both channels

simultaneously)

Equivalent sampling (repetitive signals) up to 4 GS/s

Real time sampling 1 μs to 60 s/div 40 MS/s

Trigger

Screen update Free run, on trigger

Source A, B

Sensitivity A and B @ DC to 5 MHz 0.5 divisions or 5 mV

@ 40 MHz 123B: 4 divisions

124B and 125B: 1.5 divisions

@ 60 MHz 123B: N/A

124B and 125B: 4 divisions

Slope Positive, negative

Advanced scope functions

Display modes Normal Captures up to 25 ns glitches and displays

analog-like persistence waveform.

Smooth Suppresses noise from a waveform.

Glitch off Does not capture glitches between samples

Envelope Records and displays the minimum and

maximum of waveforms over time.

Auto set (Connect-and-View™) Continuous fully automatic adjustments of amplitude, time base, trigger levels, trigger gap, and

hold-off. Manual override by user adjustment of amplitude, time base, or trigger level.

6 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Dual input meter

The accuracy of all measurements is within ± (% of reading + number of counts) from 18 °C to 28 °C.

Add 0.1x (specific accuracy) for each °C below 18 °C or above 28 °C. For voltage measurements with 10:1 probe, add probe

uncertainty +1 %. More than one waveform period must be visible on the screen.

Input A and input B

DC voltage (VDC)

Ranges 500 mV, 5 V, 50 V, 500 V, 750 V

Accuracy ± (0.5 % +5 counts)

Common mode rejection (CMRR) >100 dB @ dc, >60 dB @ 50, 60, or 400 Hz

Full scale reading 5000 counts

True-rms voltages (V ac and V ac+dc)

Ranges 500 mV, 5 V, 50 V, 500 V, 750 V

Accuracy for 5 % to 100 % of

range (DC coupled)

DC to 60 Hz (V ac+dc) ± (1 % +10 counts)

1 Hz to 60 Hz (V ac) ± (1 % +10 counts)

Accuracy for 5 % to 100 % of

range (AC or dc coupled)

60 Hz to 20 kHz ± (2.5 % +15 counts)

DC rejection (only VAC) >50 dB

Common mode rejection (CMRR)

>100 dB @ dc

>60 dB @ 50, 60, or 400 Hz

Full scale reading 5000 counts, reading is independent of any signal crest factor.

Peak

Modes Max peak, Min peak, or pk-to-pk

Ranges 500 mV, 5 V, 50 V, 500 V, 2200 V

Accuracy Accuracy Max peak or Min peak 5 % of full scale

Accuracy Peak-to-Peak 10 % of full scale

Full scale reading 500 counts

Frequency (Hz)

Ranges 123B: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz,1 MHz, 10 MHz, and 50 MHz

124B and 125B: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz, 10 MHz, and 70 MHz

Frequency range 15 Hz (1 Hz) to 50 MHz in continuous autoset

Accuracy @1 Hz to 1 MHz ± (0.5 % +2 counts)

Full scale reading 10 000 counts

RPM

Max reading 50.00 kRPM

Accuracy ± (0.5 % +2 counts)

Duty cycle (PULSE)

Range 2 % to 98 %

Frequency range 15 Hz (1 Hz) to 30 MHz in continuous autoset

Pulse width (PULSE)

Frequency range 15 Hz (1 Hz) to 30 MHz in continuous autoset

Full scale reading 1000 counts

Amperes (AMP)

With current clamp Ranges same as V dc, V ac, V ac+dc, or PEAK

Scale factors 0.1 mV/A, 1 mV/A, 10 mV/A, 100 mV/A, 400 mV/A,

1 V/A, 10 mV/mA

Accuracy same as V dc, V ac, V ac+dc, or PEAK

(add current clamp uncertainty)

7 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Temperature (TEMP) with optional temperature probe

Range 200 °C/div (200 °F/div)

Scale factor 1 mV/°C and 1 mV/°F

Accuracy as V dc (add temp. probe uncertainty)

Decibel (dB)

0 dBV 1 V

0 dBm (600 Ω /50 Ω) 1 mW referenced to 600 Ω or 50 Ω

dB on V dc, V ac, or Vac+dc

Full scale reading 1000 counts

Crest factor (CREST)

Range 1 to 10

Full scale reading 90 Counts

Phase

Modes A to B, B to A

Range 0 to 359 degrees

Resolution 1 degree

Power (125B only)

Configurations 1 phase / 3 phase 3 conductor balanced loads (3 phase: fundamental component only, AUTOSET

mode only)

Power factor (PF) Ratio between watts and VA range - 0.00 to 1.00

Watt RMS reading of multiplying corresponding samples of input A (volts) and input B (amperes)

Full scale reading 999 counts

VA Vrms x Arms

Full scale reading 999 counts

VA reactive (var) √((VA)2-W2)

Full scale reading 999 counts

Vpwm

Purpose to measure on pulse width modulated signals, like motor drive inverter outputs

Principle readings show the effective voltage based on the average value of samples over a whole number of

periods of the fundamental frequency

Accuracy as Vrms for sinewave signals

Input A to common

Ohm (Ω)

Ranges 123B and 124B 500 Ω , 5 kΩ, 50 kΩ, 500 kΩ, 5 MΩ, 30 MΩ

125B 50 Ω, 500 Ω , 5 kΩ, 50 kΩ, 500 kΩ, 5 MΩ, 30 MΩ

Accuracy ± (0.6 % + 5 counts) 50 Ω ±(2 % + 20 counts)

Full scale reading 50 Ω to 5 MΩ - 5000 counts, 30 MΩ - 3000 counts

Measurement current 0.5 mA to 50 nA, decreases with increasing ranges

Open circuit voltage <4 V

Continuity (Cont)

Beep <(30 Ω ± 5 Ω) in 50 Ω range

Measurement current 0.5 mA

Detection of shorts of ≥1 ms

Diode

Measurement voltage @0.5 mA >2.8 V

@open circuit <4 V

Measurement current 0.5 mA

Polarity + on input A, - on COM

8 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Capacitance (CAP)

Ranges 50 nF, 500 nF, 5 μF, 50 μF, 500 μF

Full scale reading 5000 counts

Measurement current 500 nA to 0.5 mA, increases with increasing ranges

Advanced meter functions

Zero Set Set actual value to reference

AutoHold (on A) Captures and freezes a stable measurement result. Beeps when stable. AutoHold works on the main

meter reading, with thresholds of 1 Vpp for AC signals and 100 mV for DC signals.

Fixed decimal point Activated by using attenuation keys.

Cursor Readout (124B and 125B)

Sources A, B

Single vertical line Average, min and max readout

Average, min, max and time from start of readout (in ROLL mode; instrument in HOLD)

Min, max and time from start of readout (in RECORDER mode; instrument in HOLD)

Harmonics values in POWER QUALITY mode.

Dual vertical lines Peak-peak, time distance and reciprocal time distance readout

Average, min, max and time distance readout (in ROLL mode; instrument in HOLD)

Dual horizontal lines High, low and peak-peak readout

Rise or fall time Transition time, 0 %-level and 100 %-level readout (manual or auto leveling; auto leveling only

possible in single channel mode)

Accuracy As oscilloscope accuracy

Recorder

The recorder captures meter readings in Meter Recorder mode or continuously captures waveform samples in Scope Recorder mode. The

information is stored on internal memory or on optional SD card (with the 125B or 124B).

The results are displayed as Chart recorder display that plots a graph of min and max values of Meter measurements over time or as a

waveform recorder display that plots all the captured samples.

Meter readings

Measurement Speed Maximum 2 measurements/s

Record Size (min, max, average) 2 M readings for 1 channel

Recorded Time Span 2 weeks

Maximum number of events 1024

Waveform record

Maximum sample rate 400 K sample/s

Size Internal memory 400 M samples Recorded Time

Span internal memory 15 minutes at 500 μs/div 11 hours at 20 ms/div

Record Size SD card 1.5 G samples

Recorded Time Span SD card 11 hours at 500 μs/div 14 days at 20 ms/div

Maximum number of events 64

9 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Power Quality (125B only)

Readings Watt, VA, var, PF, DPF, Hz

Watt, VA, var ranges (auto) 250 W to 250 MW, 625 MW, 1.56 GW

when selected: total (%r) ± (2 % + 6 counts)

when selected: fundamental (%f) ± (4 % + 4 counts)

DPF 0.00 to 1.00

PF 0.00 to 1.00, ± 0.04

Frequency range 10.0 Hz to 15.0 kHz 40.0 Hz to 70.0 Hz

Number of Harmonics DC to 51

Readings / Cursor readings

(fundamental 40 Hz to 70 Hz)

V rms / A rms /Watt each harmonic from fundamental maybe selected

for individual readings

Includes frequency of fundamental, phase Angle and K-factor (in Amp and Watt)

Bus health tester (Fluke 125B only)

Type Subtype Protocol

AS-i NEN-EN50295

CAN I S O -118 9 8

Interbus S RS-422 EIA-422

Modbus RS-232 RS-232/EIA-232

RS-485 RS-485/EIA-485

Foundation Fieldbus H1 61158 type 1, 31.25 kBit

Profibus DP EIA-485

PA 61158 type 1

RS-232 EIA-232

RS-485 EIA-485

Miscellaneous

Display Type 5.7-inch color active matrix TFT

Resolution 640 x 480 pixels

Waveform Display Vertical 10 div of 40 pixels

Horizontal 12 div of 40 pixels

Power External via Power Adapter BC430

Input voltage 10 V DC to 21 V DC

Power consumption 5 W typical

Input connector 5 mm jack

Internal via Battery Pack BP290

Battery power Rechargeable Li-Ion 10.8 V

Operating time 7 hours with 50 % backlight brightness

Charging time 4 hours with test tool off,

7 hours with test tool on

Allowable ambient temp 0 to 40 °C (32 to 104 °F) during charging

Memory Internal memory can store 20 data sets

(screen waveform and setup)

Micro SD card slot with optional SD card

(max size of 32 GB)

Mechanical Size 259 mm x 132 mm x 55 mm

(10.2 in x5.2 in x 2.15 in)

Weight 1.4 kg (3.2 lb) including battery pack

10 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Interface Optically isolated Transfer screen copies (bitmaps), settings and

data

USB to PC/laptop OC4USB optically isolated USB adapter/cable,

(optional), using FlukeView® software for

Windows®.

Optional WiFi adapter Fast transfer of screen copies (bitmaps), settings

and data to PC/laptop, tablet, smartphone, etc.

A USB port is provided for attaching the WiFi

dongle. Do not use the USB port with a cable for

safety reasons.

Environmental

Environmental MIL-PRF-28800F, Class 2

Temperature Battery Operation 0 to 40 °C (32 to 104 °F)

Power Adapter Operation 0 to 50 °C (32 to 122 °F)

Storage -20 to 60 °C (-4 to 140 °F)

Humidity (Operating) @ 0 to 10 °C (32 to 50 °F) noncondensing

@ 10 to 30 °C (50 to 86 °F) 95 %

@ 30 to 40 °C (86 to 104 °F) 75 %

@ 40 to 50 °C (104 to 122 °F) 45 %

Storage @ -20 to 60 °C (-4 to 140 °F) noncondensing

Altitude Operating at 3 km (10 000 feet) CAT III 600 V

Operating at 2 km (6 600 feet) CAT IV 600 V

Storage 12 km (40 000 feet)

EMC electromagnetic

compatibility

International IEC 61326-1: Industrial, CISPR 11:

Group 1, Class A

Korea (KCC) Class A Equipment (Industrial Broadcasting &

Communication Equipment)

USA (FCC) 47 CFR 15 subpart B. This product is considered

an exempt device per clause 15.103.

Wireless radio with adapter Frequency range 2412 MHz to 2462 MHz

Output power <100 mW

Enclosure protection IP51, ref: EN/IEC60529

Safety General IEC 61010-1: Pollution Degree 2

Measurement IEC 61010-2-033: CAT IV 600 V/CAT III 750 V

Max. input voltage input A and B Direct on input or with leads 600 Vrms CAT IV for derating

With Banana-to BNC Adapter BB120 600 Vrms for derating

Max. floating voltage from any terminal to ground 600 Vrms CAT IV, 750 Vrms up to 400 Hz

Fluke 123B Fluke 124B Fluke 125B

Functions

Full function dual input scope and meter ···

Oscilloscope bandwidth MHz 20 40 40

Meter and Scope Recorder ···

Scope cursor measurements · ·

Power and harmonics measurements ·

Bus health ·

Included accessories

10:1 voltage probe · ·

i400S AC Current Clamp ·

11 Fluke Corporation Fluke 120B Series Industrial ScopeMeter® Hand-Held Oscilloscopes

Fluke Connect is not available in all countries.

Ordering information

Fluke-123B Industrial ScopeMeter® Hand Held

Oscilloscope (20 MHz)

Fluke-123B/S Industrial ScopeMeter® Hand Held

Oscilloscope (20 MHz)*

Fluke-124B Industrial ScopeMeter® Hand Held

Oscilloscope (40 MHz)

Fluke-124B/S Industrial ScopeMeter® Hand Held

Oscilloscope (40MHz)*

Fluke-125B Industrial ScopeMeter® Hand Held

Oscilloscope (40MHz)

Fluke-125B/S Industrial ScopeMeter® Hand Held

Oscilloscope (40MHz)*

Includes: Li-Ion battery pack, charger/power

adapter, 2 shielded test leads with ground leads,

black test lead, red and blue hook clips, banana

to BNC adapter, and WiFi USB adapter**

*Fluke 120B/S versions also include soft carry case,

FlukeView™ for Windows® software, magnetic hanger,

and screen protector.

**WiFi USB adapter NOT available in all countries. Check

with your local Fluke representative.

STL120-IV Shielded Test Lead Set 600 V CAT IV

HC120-II Set of 2 hook clips

BB120-II Set of 2 banana to BNC adapter

VPS41 Voltage probe set 40MHz 600 V CAT IV

C120B Soft Carrying Case For 120B Series

SP120B Screen Protector For 120B Series

SCC120B Accessory Kit 120B Series

OC4USB Fluke OC4USB USB Interface Cable

Fluke 80i 110s Fluke 80i-110s AC/DC Current

Clamp

Fluke i1000s Fluke i1000s AC Current Probe

Fluke i1010 Fluke i1010 AC/DC Current Clamp

Fluke i200s Fluke i200s AC Current Clamp

Fluke-i3000s Fluke i3000s AC Current Clamp

Fluke i3000s Flex 24 Fluke i3000s Flex-24 AC

Current Clamp, 610 mm (24 in.)

Fluke i3000s Flex 36 Fluke i3000s Flex-36 AC

Current Clamp, 915 mm (36 in.)

Fluke i30s Fluke i30s AC/DC Current Clamp

Fluke-i310s Fluke i310s Current Probe

Fluke i400s Fluke i400s AC Current Clamp

Fluke i410 Fluke i410 AC/DC Current Clamp

Fluke i5S Fluke i5S AC Current Clamp

Fluke Corporation

PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.

PO Box 1186, 5602 BD

Eindhoven, The Netherlands

Fluke. Keeping your world

up and running.®

Set up and sustain preventive maintenance practices with

ease to help you oversee your complex world with the Fluke

Connect® system of software and over 40 wireless test tools.

• Maximize uptime and make conﬁdent maintenance decisions with data

you can trust and trace.

• Save measurements to the Fluke Cloud™ and associate with an asset so

your team can consult baseline, historical and current measurements

from one location.

• Collaborate with ease by sharing your measurement data with team

members with ShareLive™ video calls and emails.

• Wireless one-step measurement transfer with AutoRecord™ measure-

ments eliminates transcription errors, clipboards, notebooks and multiple

spreadsheets.

• Generate reports with multiple measurement types to provide status or

next step recommendations.

Find out more and take a free trial at: ﬂukeconnect.com

Google and Android store images

WiFi or cellular service is required to share data. Smart phone, wireless

service and data plan not included with purchase. First 5 GB of storage is

free. Phone support details can be viewed at ﬂuke.com/phones.

Download the app at:

Smartphone wireless service and data

plan not included with purchase.

1:23 PM

100%

Fluke 125B

99.8

1.268

VAC rms

For more information call:

In the U.S.A. (800) 443-5853 or

Fax (425) 446-5116

In Europe/M-East/Africa +31 (0) 40 2675

200 or

Fax +31 (0) 40 2675 222

In Canada (800)-36-FLUKE or

Fax (905) 890-6866

From other countries +1 (425) 446-5500 or

Fax +1 (425) 446-5116

Web access: http://www.fluke.com

Specifications subject to change without notice.

Printed in U.S.A. 1/2016 6006986b-en

Modification of this document is not permitted

without written permission from Fluke Corporation.