100 SM PC Series Powertron * * * * * * * Resistances to 25MOhms Resistance Tolerances to 0.005% Temperature Coefficients of 1 ppm/K Power Ratings to 2W 100% Acceptance Tested / Traceable to NIST Long Term Stability / 100ppm/year Matched Resistance Sets to 0.001% and 0.5 ppm/K SPECIFICATIONS Type Commercial Wattage ( Watts ) Maximum Ohms SM-2 0.06 75k Minimum Tolerance (%) Dimensions Lead Diameter 0.002" [0.05mm] 1 Maximum Working Voltage Diameter 0.005" [0.13mm] Length 0.025" [0.64mm] 0.100 [2.5] 0.210 [5.3] 0.020 [0.5] 75 100 SM-3 0.08 150k 0.125 [3.2] 0.260 [6.6] 0.020 [0.5] 0.025 [0.6] SM-4 0.10 250k 0.125 [3.2] 0.375 [9.5] 0.020 [0.5] 100 SM-13 0.10 250k 0.156 [4.0] 0.312 [7.9] 0.020 [0.5] 100 SM-5 0.12 400k 0.187 [4.7] 0.250 [6.4] 0.025 [0.6] 150 SM-6 0.15 500k 0.187 [4.7] 0.295 [7.5] 0.025 [0.6] 150 139A 0.15 500k 0.250 [6.4] 0.250 [6.4] 0.025 [0.6] 100 200 SM-15 0.175 750k 0.187 [4.7] 0.375 [9.5] 0.025 [0.6] 0.020 [0.5] SM-12 0.20 750k 0.187 [4.7] 0.450 [11.4] 0.025 [0.6] 200 100 0.20 800k 0.250 [6.4] 0.375 [9.5] 0.032 [0.8] 0.025 [0.6] 200 SM-7 0.25 1M 0.210 [5.3] 0.465 [11.8] 0.025 [0.6] 250 300 0.005 101 0.25 1.2M 0.250 [6.4] 0.500 [12.7] 0.032 [0.8] 0.025 [0.6] 102 0.33 2.5M 0.250 [6.4] 0.750 [19.1] 0.032 [0.8] 0.025 [0.6] 400 120 0.40 3.8M 0.375 [9.5] 0.500 [12.7] 0.032 [0.8] 300 121 0.50 3.8M 0.375 [9.5] 0.750 [19.1] 0.032 [0.8] 400 129 0.75 10M 0.375 [9.5] 1.000 [25.4] 0.032 [0.8] 600 106 1.00 12M 0.500 [12.7] 1.000 [25.4] 0.032 [0.8] 800 107 1.50 15M 0.500 [12.7] 1.500 [38.1] 0.032 [0.8] 900 108 2.00 25M 0.500 [12.7] 2.000 [50.8] 0.032 [0.8] 1000 1 Where more than one lead is listed / the top value is Standard Lead Length = 1.50 [38] Min. Ordering Information Part Number - Resistance - Tolerance - TCR ( If not standard ) Example: SM-6 25kOhms 0.1% Document Number: 64300 Revision: 20-09-10 For technical questions, contact: powertron@vishaypg.com www.powertron.de 1 100 SM PC Series Powertron SPECIFICATIONS (continued) PC Series Type Commercial Wattage ( Watts ) Maximum Ohms 100PC 0.125 130PC 0.125 131PC 0.125 500k 101PC 0.25 600k 120PC 0.40 104PC 0.50 Dimensions Minimum Tolerance (%) 1 Length 0.025" [0.64mm] Lead Diameter 0.002" [0.05mm] 500k 0.250 [6.4] 0.375 [9.5] 0.025 [0.6] 0.150 [3.8] 150 500k 0.250 [6.4] 0.312 [7.9] 0.025 [0.6] 0.150 [3.8] 150 0.250 [6.4] 0.312 [7.9] 0.025 [0.6] 0.200 [5.1] 150 0.250 [6.4] 0.500 [12.7] 0.025 [0.6] 0.150 [3.8] 150 800k 0.375 [9.5] 0.500 [12.7] 0.032 [0.8] 0.200 [5.1] 300 1M 0.500 [12.7] 0.500 [12.7] 0.032 [0.8] 0.025 [0.6] 0.300 [7.6] 400 0.005 1 Lead Spacing 0.015" [0.4mm] Where more than one lead is listed / the top value is Standard Lead Length = 1.00 [25] Min. Rectangular Series Type Commercial Wattage ( Watts ) Maximum Ohms SM-8 0.125 SM-9 0.250 SP5086 SP5232 Dimensions Lead Diameter1 0.002" [0.05mm] Lead Spacing 0.015" [0.4mm] 0.250 [6.4] 0.270 [6.9] 0.032 [0.8] 0.125 [3.2] 150 0.270 [6.9] 0.540 [13.7] 0.032 [0.8] 0.250 [6.4] 150 0.102 [2.6] 0.320 [8.1] 0.300 [7.6] 0.025 [0.6] 0.150 [3.8] 150 0.160 [4.1] 0.525 [13.3] 0.585 [14.9] 0.032 [0.8] 0.400 [10.2] 150 Height 0.025" [0.64mm] 500k 0.140 [3.6] 750k 0.150 [3.8] 0.300 500k 0.500 1M 1 Specification Value Tolerances 0.005% to 1% ( See Derating Curve ) Temperature Coefficient ( Standard ) >100W : 10ppm/K 10W to100W : 20ppm/K <10W : 30ppm/K Temperature Range -55C to +145C ( See Derating Curve ) ( down to 1ppm on request ) Power Derating Curve Percentage of Rated Power 160 1% / 140 0.05% 120 100 0.5% / 0.02% / 0.1% Tolera n 80 Fast Rise Time - These resistors are available in a low reactance design for fast rise time and extended frequency response. Toler a nce High Stability - These resistors are available in a High Stability version with maximun resistance change of 20ppm/year under normal conditions. e 60 0.005% Tolera nce 40 20 0 0 20 www.powertron.de 2 40 60 80 Lead Length = 1.00 [25] Min. Notes: ( Contact Factory for these options ) ce 0.01% T oleranc Maximum Working Voltage Length 0.010" [0.25mm] Width 0.010" [0.25mm] 180 Maximum Working Voltage Diameter 0.005" [0.13mm] 100 Ambient Temperature C 120 140 160 High TC - These resistors are available in High TC configurations. Standard TC's are +2600 / +3850 / +4500 / +5000 / and +6000 ppm/K. For technical questions, contact: powertron@vishaypg.com Document Number: 64300 Revision: 20-09-10 Legal Disclaimer Notice Vishay Precision Group Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay Precision Group"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify Vishay Precision Group's terms and conditions of purchase, including but not limited to, the warranty expressed therein. Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group's knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document No.: 63999 Revision: 27-Apr-11 www.vishaypg.com 1