TOSHIBA TD62706P-H/FA-H TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62706P-H, TD62706FA-H 6ch HIGH-VOLTAGE SOURCE-CURRENT DRIVER The TD62706P-H is and TD62706FA-H are comprised of six TD62706P-H source current Transistor Array. This driver is specifically designed for fluorescent display applications. For proper operation, the substrate (SUB) must be connected to the most negative voltage. FEATURES DIP16-P-300-2.54A TD62706FA-H @ Package Type P-H Type : DIP1GPIN FA-H Type : SSOP16PIN @ High Output Voltage : Vec - VOUT = 60V (MIN) @ Output Current (Single Output) : louT= -50mA (MAX) SSOP16-P-225-1.00A @ Input Compatible with Various Types of Logic Weight - Rin =10kQ DIP16-P-300-2.54A _: 1.119 (Typ.) * NIN SSOP16-P-225-1.00A : 0.14g (Typ.) @ Wide operating temperature range. : Topr= 40~105C PIN ASSIGNMENT (Top view) 01 02 03 O4 O05 O68 NC SUB De] bs] De] be] fre] Fr] [ro] NAAN | LIRIEILIGI Ee ye mM 2 B 4 15 16 VEE Vec 961001EBA1 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @ The products described in this document are subject to foreign exchange and foreign trade control laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1998-05-15 1/8TOSHIBA TD62706P-H/FA-H SCHEMATICS (Each driver) INPUT AA VEE OUTPUT >eO Vcc I b SUB (Note) The input and output parasitic diodes cannot be used as clamp diodes. MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT Vcc-VEE 30 Power Supply Voltage Vec-VsyB 60 Vv Output Voltage Vcc-VoOUT 60 Vv Input Voltage VIN-VEE Vcc-VEE V Output Current lOUT - 50 mA/ch Input Current lIN +10 mA PD a (Note 1) 10 Power Dissipation Ww PD 0.78 (Note 2) Operating Temperature Topr -40~105 a @ Storage Temperature Tstg -55~150 C (Note 1) TD62706P-H : Delated above 25C in the proportion of 8.0mw/C. (Note 2) TD62706FA-H : On Glass Epoxy PCB (50.x 50 x 1.6mm Cu 40% ). Delated above 25C in the proportion of 6.2mw/C. RECOMMENDED OPERATING CONDITIONS (Ta = - 40~85C) CHARACTERISTIC SYMBOL TEST CONDITION MIN | TYP. | MAX | UNIT Power Supply Voltage Vcc Vee =0V 45 25 V VsuB Vec=0V VouT| -55 Output Voltage VouT |Vcc=90V 0 -55 Vv Output Current lOUT 0 -40 |mA/ch Input Voltage VIN Veg =O0V, Vcc =25V 0 7 V Power Dissipation Pp TD62706P-H {| 052 | Vy TD62706FA-H when mounting 0.4 1998-05-15 2/8TOSHIBA TD62706P-H/FA-H ELECTRICAL CHARACTERISTICS (Ta = 25C) TEST CHARACTERISTIC SYMBOL | CIR- TEST CONDITION MIN | TYP. | MAX | UNIT CUIT Input "H Level | Vin 1 Veg =0V 2.2 Vv Voltage L" Level VIL VEE =0V 0.8 Input H Level WH 5 Veg =OV, VIN =2.4V 0.12 | 0.18} mA Current L" Level lL VEE =VIN=9V, Vcc =25V +1] yA Leak Veg =OV, Vec = 25V Output Leakage IcEX 3 EE =OV, Voc =25 _ |-100] pa Current VIN=VIL MAX. VOUT = 30V Collector-Emitter Vv A VEE =0V, Vec=Vecc MIN. _ _ Vec Vv Saturation Voltage CE (sat) VIN=VIH MIN. louT= -40mA -2.5 Supply Current Veg =OV, Voc =25V (Output On) IcC(ON) | 1 | Vin=Vin max, OUTPUT=OPEN | | 25} mA Turn-On Delay ton 5 RL = 1.4kQ, 0.2 ; Turn-Off Delay tOFF C, = 15pF 15/ | * RECOMMENDED OPERATING CONDITION (Ta = -40~105C) CHARACTERISTIC SYMBOL TEST CONDITION MIN | TYP. | MAX | UNIT Power Supply Voltage Vcc VEE = OV 45 25] y VsuB_ | Voc =9V VouT| | -955 Output Voltage VOUT Vcc =0V 0 -55 Vv 2 Circuits TD62706P-H 0 _ - 40 Parallel ON TD62706FA-H 0 _ -40 4 Circuits TD62706P-H 0 _ -37 Output Current lOUT Parallel ON TD62706FAH 0 = =30 mA/ch 6 Circuits TD62706P-H o | | -15 Parallel ON TD62706FA-H| O | | -25 Input Voltage VIN VEE =0V, Vcc =25V 0 7 Vv Power Dissipation p TD62706P-H _ _ 0.36 W ower Missipaulo D TD62706FA-H when mounting | | 028 1998-05-15 3/8TOSHIBA ELECTRICAL CHARACTERISTICS (Ta = 105C) : TD62706P-H TD62706P-H/FA-H TEST CHARACTERISTIC SYMBOL | CIR- TEST CONDITION MIN | TYP. | MAX | UNIT CUIT Input H" Level VIH 1 VEE =O0V 1.8 V Voltage L" Level VIL VEE =0V 0.6 Input H Level WH 5 Veg =OV, VIN =2.4V 0.12 | 0.18} mA Current L" Level lL VEE =VIN=9V, Vcc =25V +10] pA Leak Veg =OV, Voc =25V Output Leakage IcEX 3 EE=9V, Vcc =25 _ |-300] ya Current VIN=VIL MAX. VOUT = 30V Collector-Emitter Vv A VEE =0V, Vec=Vecc MIN. _ _ Vec Vv Saturation Voltage CE (sat) VIN=VIH MIN. louT= -40mA -2.5 Supply Current Veg =OV, Voc =25V (Output On) IeC(ON) | 1 vin =Vin max, OUTPUT=OPEN | | 25) mA Turn-On Delay ton 5 RL =1.4kQ, Single circuit 0.4 ; Turn-Off Delay tOFF C, = 15pF _ 30/ | * ELECTRICAL CHARACTERISTICS (Ta=105C) : TD62706FA-H TEST CHARACTERISTIC SYMBOL | CIR- TEST CONDITION MIN | TYP. | MAX | UNIT CUIT Input "H" Level | Viq 1 Veg =0V 1.8 Vv Voltage L" Level VIL Veg =0V 0.6 Input "H Level NH 5 Veg =OV, Vin =2.4V 0.12 | 0.18) mA Current L" Level NL VEE =VIN =OV, Vcc =25V +10] YA Output Leakage Veg =O0V, Vcc =25V | |- A Current CEX 3 VIN=VIL MAX. VOUT = 30V 300) Collector-Emitter Vv A Vee =Vsup =OV, Vcc =Vec MIN. Vec Vv Saturation Voltage CE (sat) VIN=VIH MIN. louT= 25mA 7 7 - 1.1 Supply Current Vee =Vsup =9V, Vcc = 16V I 1 _ _ 1 A (Output On) Cc (ON) VIN=VIH MAX, OUTPUT = OPEN Oo; m Turn-On Delay ton 5 R, = 1.4kQ, Single circuit 04]; ; Turn-Off Delay tOFF CL = 15pF | 30/ | * 1998-05-15 4/8TOSHIBA TEST CIRCUIT 1. ViHe VIL lee 3. ICEX Vee 5. ton, toFF vec neuf PULSE GENERATOR OUTPUT CF SR,=1.4kQ il vee | VsuB CL = 15pF (Includes probe and jig capacitance) PRECAUTIONS for USING TD62706P-H/FA-H 2. UHe UL Vec 4. VCE (sat) vec Input condition VCE (sat) VIN Vec VSUB TD62706 0-3V 25V -30 VIN : Pulse Width 50,s Duty Cycle 50% tr=5ns t= 10ns Utmost care is necessary in the design of the output line, Vcc and GND (SUB, Veg) line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 1998-05-15 5/8TOSHIBA TD62706P-H/FA-H IN - VIN (ON) louT - VIN _ < z = 3 5 = = 2 Ta=85C}P 25+ -1 z 5 uw & = a a K bE ~ > 2 E _ D> 3 0 1 2 3 4 5 6 7 0 0.5 1.0 15 2.0 2.5 3.0 INPUT VOLTAGE Vin-Veg (V) OUTPUT VOLTAGE Vin-Vege (V) lp VF Pp - Ta ~ Ta=25C @ Type-P-H Open Air @ Type-FA-H On glass epoxy PCB n = ~ a e a 3 fe E 3 & 2 g 2 co g 3 << = 2 a 3 id 0 0.2 04 06 0.8 1.0 1.2 14 0 25 50 75 100 125. 150175 FORWARD BIAS VOLTAGE Vp (V) AMBIENT TEMPERATURE Ta (C) 1998-05-15 6/8TOSHIBA TD62706P-H/FA-H OUTLINE DRAWING DIP16-P-300-2.54A 16 9 Clo ro nN ') Fi T S T LCI CST Ly Ly LL Ld B * . 19.75MAX 4 19.25+0.2 . 0.95+0.1 +0.2 4.15+0.3 0.735TYP Weight : 1.11g (Typ.) 1998-05-15 7/8TOSHIBA TD62706P-H/FA-H OUTLINE DRAWING SSOP16-P-225-1.00A 16 9 HH HHHHHH wl O i 1 8 4.60.2 6,540.3 O.6TYP _ | | 0.4+0.1 10.20) 8.7MAX a 8.240.2 Le a! >| 1.50.2 1.9MAX 1 0.159:5 Weight : 0.14g (Typ.) 0.157845 le Unit : mm E uD A N | |__| 0.525+0.2 1998-05-15 8/8