1997 Nov 13 1
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
FEATURES
•Polarized aluminium electrolytic
capacitors, solid electrolyte MnO2
•Radial leads, max. height 9.5 mm,
resin dipped, orange coloured
•Extremely long useful life,
20000 hours/125 °C
•Extended usable temperature
range up to 175 °C
•Excellent low temperature,
impedance and ESR behaviour
•Charge and discharge proof,
application with 0 Ω resistance
allowed
•Reverse DC voltage up to 0.3 ×UR
allowed
•AC voltage up to 0.8 ×UR allowed
•Advanced technology to achieve
high reliability and high stability.
Fig.1 Component outlines.
handbook, 4 columns
MAM076 - 1
handbook, 4 columns
MBG074
SAL RPM
128
axial
version
SAL A
123 SAL RP
122
lower
CV/volume
APPLICATIONS
•EDP, telecommunication, general
industrial, automotive and
audio-video
•Smoothing, filtering and buffering •For small power supplies, DC/DC
converters.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Case sizes (Hmax ×Wmax ×Tmax in mm) 9.5 ×7×3 to 9.5 ×8×6
Rated capacitance range (E6 series), CR0.1 to 68 µF
Tolerance on CR±20%
Rated voltage range, UR6.3 to 40 V
Category temperature range:
UR= 6.3 to 40 V −55 to +85 °C
UC= 6.3 to 25 V −55 to +125 °C
Endurance test at 125 °C 10000 hours
Useful life at 125 °C 20000 hours
Useful life at 175 °C 2000 hours
Useful life at 40 °C, IR applied >300000 hours
Shelf life at 0 V, 125 °C 500 hours
Based on sectional specification IEC 384-4/CECC 30300
Detail specification IEC 384-4-2, CECC 30302
Climatic category IEC 68 55/125/56
1997 Nov 13 2
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Selection chart for CR, UR, UCand relevant maximum case sizes (H ×W×T in mm)
Preferred types in bold.
CR
(µF)
UR (V) at Tamb =85°C
6.3 10 16 25 35 40
UC (V) at Tamb = 125 °C
6.3 10 16 25 25 25
0.1 −−−−−9.5 ×7×3
0.15 −−−−−9.5 ×7×3
0.22 −−−−−9.5 ×7×3.5
0.33 −−−−9.5 ×7×3.5 9.5 ×7×4
0.47 −−−−9.5 ×7×4 9.5 ×7×5
0.68 −−−9.5 ×7×3.5 9.5 ×7×4 9.5 ×7×5
1−−−9.5 ×7×3.5 9.5 ×7×5 9.5 ×8×5
1.5 −−−9.5 ×7×3.5 9.5 ×8×5 9.5 ×8×6
2.2 −−9.5 ×7×3.5 9.5 ×7×4 9.5 ×8×6 9.5 ×8×6
3.3 −−9.5 ×7×3.5 9.5 ×7×5 9.5 ×8×6−
4.7 −9.5 ×7×3.5 9.5 ×7×4 9.5 ×8×5−−
6.8 −9.5 ×7×3.5 9.5 ×7×4 9.5 ×8×6−−
10 9.5 ×7×3.5 9.5 ×7×4 9.5 ×7×5 9.5 ×8×6−−
15 −9.5 ×7×4 9.5 ×8×5−−−
22 9.5 ×7×4 9.5 ×7×5 9.5 ×8×6−−−
33 9.5 ×7×5 9.5 ×8×5−−−−
47 9.5 ×8×5 9.5 ×8×6−−−−
68 9.5 ×8×6−−−−−
1997 Nov 13 3
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES
Fig.2 Form CB: Short leads, in boxes.
Dimensions in mm.
For dimensions see Table 1.
The diameter of the mounting holes in the printed-circuit board is 0.8 ±0.1 mm.
Flanges are provided with degassing grooves.
h
andbook, full pagewidth
T
W
MBC382 - 2
O 0.6 0.06
0.05
90.5
0
0.3
0.7
4.5
5.2 0.2
printed-circuit
board
Bottom view
Dimensions in mm.
For dimensions see Table 1.
The diameter of the mounting holes in the printed-circuit board is 0.8 ±0.1 mm,
except for the hole of the anode lead of Form CA capacitors: 1.3 −0.2 mm.
Flanges are provided with degassing grooves.
h
andbook, full pagewidth
MBC384 - 2
90.5
0
5.2 0.2
9 1
2 0.5
12.5
0.5
O 0.6 0.06
0.05
printed-circuit
board
T
W
Bottom view
1.0 0.1
0.25
0.05
Fig.3 Form CA: Long leads with keyed polarity, in boxes.
1997 Nov 13 4
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Table 1 Physical dimensions, mass and packaging quantities; see Figs 2 and 3
Note
1. In plastic bags of 200 units each.
MAXIMUM
CASE SIZE
H×W×T
(mm)
CASE
CODE MASS
(g)
PACKAGING QUANTITIES
FORM
CA
(note 1)
FORM
CB
(note 1)
FORM
TR+ FORM
TFA
9.5 ×7×310≈0.22 1000 1000 2000 2000
9.5 ×7×3.5 20 ≈0.25 1000 1000 2000 2000
9.5 ×7×430≈0.30 1000 1000 2000 2000
9.5 ×7×540≈0.35 1000 1000 1000 1000
9.5 ×8×550≈0.50 1000 1000 1000 1000
9.5 ×8×660≈0.60 1000 1000 1000 1000
TAPED PRODUCTS
Tape dimensions are specified in this handbook, section
“Packaging”
.
Form TR+: Taped on reel, positive leading.
Form TFA: Taped in ammopack.
Fig.4 Taped versions.
handbook, halfpage
MBC386 - 1
MARKING
The capacitors are marked (where possible) with the
following information:
•Rated capacitance (in µF)
•Tolerance code on rated capacitance (M for ±20%)
•Rated voltage (in V) and category voltage if applicable
•Date code in accordance with
“IEC 62”
•Name of manufacturer
•‘+’ sign to indicate the anode terminal
•‘I’ sign to indicate the cathode terminal.
MOUNTING
When bending, cutting or straightening the leads, ensure
that the capacitor body is relieved of stress.
Bending after soldering must be avoided.
1997 Nov 13 5
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
ELECTRICAL DATA AND ORDERING INFORMATION
Unless otherwise specified, all electrical values in Table 2 apply
at Tamb =20to25°C, P = 86 to 106 kPa, RH = 45 to 75%.
CRrated capacitance at 100 Hz, tolerance ±20%
IRmax. RMS ripple current no necessary DC applied
IL5 max. leakage current after 5 minutes at UR
Tan δmax. dissipation factor at 100 Hz
ESR max. equivalent series resistance at 100 Hz
Z max. impedance at 100 kHz
Ordering example
Electrolytic capacitors 128 series
10 µF/16 V; ±20%
Maximum case size: 9.5 ×7×5, Form CB
Catalogue number: 2222 128 55109.
Table 2 Electrical data and ordering information 128 series; preferred types in bold
UC
(V) UR
(V)
CR
100 Hz
(µF)
MAXIMUM
CASE SIZE
H×W×T
(mm)
CASE
CODE
IR
100 Hz
125 °C
(mA)
IR
10 kHz
85 °C
(mA)
IR
100 kHz
40 °C
(mA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
100 kHz
(Ω)
CATALOGUE NUMBER 2222 128.....
FORM
CB FORM
CA
FORM
TR+
REEL
FORM
TFA
AMMO
6.3 6.3 10 9.5 × 7 × 3.5 20 22.4 320 595 2 0.10 20 2.0 53109 73109 23109 33109
22 9.5 ×7×430 32.9 470 870 4 0.10 9 1.0 53229 73229 23229 33229
33 9.5 ×7×5 40 65.4 595 1100 5 0.10 6.1 0.70 53339 73339 23339 33339
47 9.5 ×8×550118.4 740 1360 7 0.10 4.3 0.50 53479 73479 23479 33479
68 9.5 ×8×6 60 153.0 800 1650 11 0.10 3.0 0.40 53689 73689 23689 33689
10 10 4.7 9.5 ×7×3.5 20 16.1 230 425 2 0.10 43 3.00 54478 74478 24478 34478
6.8 9.5 ×7×3.5 20 18.9 270 500 2 0.10 30 2.20 54688 74688 24688 34688
10 9.5 ×7×430 21.7 310 573 3 0.10 20 1.70 54109 74109 24109 34109
15 9.5 ×7×4 30 27.3 390 720 4 0.10 14 1.20 54159 74159 24159 34159
22 9.5 ×7×540 51.7 470 870 6 0.10 9 0.90 54229 74229 24229 34229
33 9.5 ×8×5 50 81.6 510 940 8 0.10 6.1 0.60 54339 74339 24339 34339
47 9.5 ×8×660105.4 620 1140 12 0.10 4.3 0.40 54479 74479 24479 34479
16 16 2.2 9.5 ×7×3.5 20 14.0 200 370 2 0.10 91 4.50 55228 75228 25228 35228
3.3 9.5 ×7×3.5 20 16.1 230 425 2 0.10 61 3.30 55338 75338 25338 35338
4.7 9.5 ×7×430 18.9 270 500 2 0.10 43 2.30 55478 75478 25478 35478
6.8 9.5 ×7×4 30 22.4 320 590 3 0.10 30 1.65 55688 75688 25688 35688
10 9.5 ×7×540 42.9 390 720 4 0.10 20 1.10 55109 75109 25109 35109
15 9.5 ×8×5 50 71.2 445 820 6 0.10 14 0.85 55159 75159 25159 35159
22 9.5 ×8×660 86.7 510 940 9 0.10 9 0.65 55229 75229 25229 35229
1997 Nov 13 6
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
25 25 0.68 9.5 ×7×3.5 20 7.7 110 200 2 0.10 295 17.00 56687 76687 26687 36687
1 9.5 ×7×3.5 20 9.1 130 240 2 0.10 200 12.50 56108 76108 26108 36108
1.5 9.5 ×7×3.5 20 10.8 155 285 2 0.10 135 9.50 56158 76158 26158 36158
2.2 9.5 ×7×430 13.6 195 360 2 0.10 91 7.00 56228 76228 26228 36228
3.3 9.5 ×7×5 40 16.1 230 425 2 0.10 61 5.20 56338 76338 26338 36338
4.7 9.5 ×8×550 25.3 270 500 3 0.10 43 3.50 56478 76478 26478 36478
6.8 9.5 ×8×6 60 52.7 310 570 4 0.10 30 2.70 56688 76688 26688 36688
10 9.5 ×8×660 64.8 360 660 6 0.10 20 2.00 56109 76109 26109 36109
25 35 0.33 9.5 ×7×3.5 20 5.6 80 145 2 0.10 610 27.00 50337 70337 20337 30337
0.47 9.5 ×7×430 6.3 90 165 2 0.10 430 20.00 50477 70477 20477 30477
0.68 9.5 ×7×4 30 7.7 110 205 2 0.10 295 15.00 50687 70687 20687 30687
1 9.5 ×7×540 13.7 125 230 2 0.10 200 10.00 50108 70108 20108 30108
1.5 9.5 ×8×5 50 24.8 155 285 2 0.10 135 7.00 50158 70158 20158 30158
2.2 9.5 ×8×660 33.1 195 360 2 0.10 91 4.50 50228 70228 20228 30228
3.3 9.5 ×8×6 60 39.9 235 435 3 0.10 61 3.50 50338 70338 20338 30338
25 40 0.1 9.5 ×7×310 2.0 40 75 2 0.10 1990 45.00 57107 77107 27107 37107
0.15 9.5 ×7×3 10 2.5 50 95 2 0.10 1330 35.00 57157 77157 27157 37157
0.22 9.5 ×7×3.5 20 4.2 60 115 2 0.10 910 27.00 57227 77227 27227 37227
0.33 9.5 ×7×4 30 5.3 75 140 2 0.10 610 20.00 57337 77337 27337 37337
0.47 9.5 ×7×540 10.4 95 175 2 0.10 430 15.00 57477 77477 27477 37477
0.68 9.5 ×7×5 40 12.1 110 205 2 0.10 295 10.00 57687 77687 27687 37687
1 9.5 ×8×550 20.0 125 230 2 0.10 200 7.00 57108 77108 27108 37108
1.5 9.5 ×8×6 60 25.5 150 280 2 0.10 135 5.50 57158 77158 27158 37158
2.2 9.5 ×8×660 33.1 195 360 2 0.10 91 4.20 57228 77228 27228 37228
UC
(V) UR
(V)
CR
100 Hz
(µF)
MAXIMUM
CASE SIZE
H×W×T
(mm)
CASE
CODE
IR
100 Hz
125 °C
(mA)
IR
10 kHz
85 °C
(mA)
IR
100 kHz
40 °C
(mA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
100 kHz
(Ω)
CATALOGUE NUMBER 2222 128.....
FORM
CB FORM
CA
FORM
TR+
REEL
FORM
TFA
AMMO
1997 Nov 13 7
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Additional electrical data
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods Us≤1.15 ×UR
Reverse voltage Urev < 0.3 ×UR
Maximum peak AC voltage reverse voltage applied ≤2V
Maximum peak AC voltage without
reverse voltage applied Tamb ≤85 °C
at f ≤0.1 Hz 0.30 ×UR
at 0.1 Hz <f≤1 Hz 0.45 ×UR
at 1 Hz <f≤10 Hz 0.60 ×UR
at 10 Hz <f≤50 Hz 0.65 ×UR
at f >50 Hz 0.80 ×UR
85 °C<Tamb ≤125 °C
at f ≤0.1 Hz 0.15 ×UR
at 0.1 Hz <f≤1 Hz 0.22 ×UR
at 1 Hz <f≤10 Hz 0.30 ×UR
at 10 Hz <f≤50 Hz 0.32 ×UR
at f >50 Hz 0.40 ×UR
Inductance
Equivalent series inductance (ESL) case sizes 9.5 ×7×3 to 9.5 ×7×5 mm typ. 9 to 14 nH
case sizes 9.5 ×8×5 and 9.5 ×8×6 mm typ. 11 to 16 nH
all case sizes max. 20 nH
Dissipation
Maximum power dissipation case sizes 9.5 ×7×3 to 9.5 ×7×5mm P
125 =88mW
case sizes 9.5 ×8×5 and 9.5 ×8×6mm P
125 = 104 mW
Current
Maximum leakage current after 5 minutes at UR and Tamb =25°CI
L5 ≤0.025CR×UR or 2 µA
whichever is greater;
see Table 2
Typical leakage current 15 s at UR and Tamb =25°C
U
R= 6.3 to 16 V ≈0.2 ×value stated in Table 2
UR=25to40V ≈0.1 ×value stated in Table 2
1997 Nov 13 8
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Voltage
Ripple current (IR)
Applying the maximum RMS ripple current given in Table 2 will cause a device temperature of 138 °C.
The 100 kHz values in Table 2 for other temperatures are to be calculated with the following IR multipliers:
PARAMETER Tamb
25 °C40°C65°C85°C 105 °C 125 °C
IR multiplier 1.1 1.0 0.88 0.75 0.59 0.37
Fig.5 Maximum permissible voltage up to Tamb = 175 °C.
Curve 1: UR= 6.3 V to 25 V.
Curve 2: UR= 35 and 40 V.
handbook, 4 columns
U
UR
(%)
50
T ( C)
050
85 100 125 150 175
0
33
50
66
100
MRA486
amb o
2
1
1997 Nov 13 9
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Capacitance (C)
Typical capacitance change after endurance test at Tamb = 125 °C
Fig.6 Typical multiplier of capacitance and standard deviation as functions of ambient temperature.
C0= capacitance at 25 °C and 100 Hz.
handbook, 4 columns
80 40 40
1.1
1.0
0.8
0.9
MGB017
0Tamb ( C)
o
C
0
80 120 160
standard deviation σ
σ0.05
0
0.6
1.2
0.7
C
Fig.7 Change of capacitance as a function of cumulative frequency after endurance test.
handbook, full pagewidth
MGB018
0.01
10
4
8
6
2
4
2
0
0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.99
cumulative frequency (%)
∆C
(%) 2000 h
10000 h
5000 h
1997 Nov 13 10
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Leakage current
Typical leakage current change after endurance test at Tamb = 125 °C
Fig.8 Typical multiplier of leakage current as a function of ambient temperature.
I0= leakage current during continuous operation at UR and Tamb =25°C.
handbook, 4 columns
16040 0 40
10
MGB019
10
1
10 120
Tamb ( C)
o
80
I0
I
1
2
handbook, full pagewidth
MGB020
0.01
1
4
60
2
3
30
6
8
10
20
40
100
80
leakage current (% of initial requirements)
5
50
0.05 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.95 99.99
cumulative frequency (%)
2000 h
10000 h
5000 h
init.
Fig.9 Leakage current change as a function of cumulative frequency after endurance test.
1997 Nov 13 11
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Dissipation factor (tan δ)
Typical tan δ change after endurance test at Tamb = 125 °C
handbook, 4 columns
– 80 – 40 40
MGB021
0Tamb ( C)
o
80 120 160
0
tan δ
tan δ
2.0
1.5
1.0
0.5
0
standard deviation σ
σ0.5
0
Fig.10 Typical multiplier of dissipation factor and standard deviation as functions of ambient temperature.
Tan δ0= dissipation factor at Tamb =25°C and 100 Hz.
Fig.11 Tan δ change as a function of cumulative frequency after endurance test.
handbook, full pagewidth
MGB022
0.01
0
20
40
120
60
80
100
tan δ (% of initial requirements)
0.1 0.5 1 2 5 10 20 30 40 50 60 70 80 90 95 98 99 99.5 99.9 99.99
cumulative frequency (%)
2000 h
10000 h
5000 h
init.
1997 Nov 13 12
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Equivalent series resistance (ESR)
Fig.12 Typical ESR as a function of ambient temperature.
Curve 1: 0.1 µF, 40 V.
Curve 2: 1.5 µF, 40 V.
Curve 3: 3.3 µF, 25 V.
Curve 4: 10 µF, 6.3 V.
Curve 5: 22 µF, 10 V.
ESR at 100 Hz.
handbook, 4 columns
103
102
10
1
10 1150100
MBC593
50 0 50 100
104
ESR
(Ω)
Tamb ( C)
o
1
2
3
4
5
Fig.13 Typical ESR as a function of frequency.
Curve 1: 0.22 µF, 40 V.
Curve 2: 1.5 µF, 25 V.
Curve 3: 2.2 µF, 16 V.
Curve 4: 10 µF, 6.3 V.
Case size H ×W×T=9.5 ×7×3.5 mm.
Tamb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10310410 7
f (Hz)
102
101
1
105106
102
MRA481
2
3
4
1
10 1
10 2
1997 Nov 13 13
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Fig.14 Typical ESR as a function of frequency.
Curve 1: 2.2 µF, 25 V.
Curve 2: 4.7 µF, 16 V.
Curve 3: 22 µF, 6.3 V.
Case size H ×W×T = 9.5 ×7×4 mm.
Tamb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA482
10 1
10 2
2
3
1
Fig.15 Typical ESR as a function of frequency.
Curve 1: 0.47 µF, 40 V.
Curve 2: 3.3 µF, 25 V.
Curve 3: 10 µF, 16 V.
Curve 4: 33 µF, 6.3 V.
Case size H ×W×T = 9.5 ×7×5 mm.
Tamb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA483
10 1
10 2
2
3
4
1
1997 Nov 13 14
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Fig.16 Typical ESR as a function of frequency.
Curve 1: 1 µF, 40 V.
Curve 2: 4.7 µF, 25 V.
Curve 3: 47 µF, 6.3 V.
Case size H ×W×T = 9.5 ×8×5 mm.
Tamb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA484
10 1
10 2
2
3
1
Fig.17 Typical ESR as a function of frequency.
Curve 1: 10 µF, 25 V.
Curve 2: 22 µF, 16 V.
Curve 3: 68 µF, 6.3 V.
Case size H ×W×T = 9.5 ×8×6 mm.
Tamb =25°C.
handbook, 4 columns
103
ESR
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA485
10 1
10 2
2
3
1
1997 Nov 13 15
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Impedance (Z)
Fig.18 Typical multiplier of impedance as a function of frequency at different ambient temperatures.
Z0= initial impedance value at Tamb =25°C.
handbook, 4 columns
MGB023
2.0
0
0.5
10210 3104105106107
1.5
1.0
f (Hz)
Z
0
108
Z
+125 C
o
+50 C
o
+25 C
o
–20 C
o
–55 C
o
T =
amb
Fig.19 Typical impedance as a function of frequency.
Curve 1: 0.22 µF, 40 V.
Curve 2: 1.5 µF, 25 V.
Curve 3: 2.2 µF, 16 V.
Curve 4: 10 µF, 6.3 V.
Case size H ×W×T = 9.5 ×7×3.5 mm.
Tamb =25°C.
handbook, 4 columns
103
Z
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA491
10 1
10 2
2
3
4
1
1997 Nov 13 16
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Fig.20 Typical impedance as a function of frequency.
Curve 1: 2.2 µF, 25 V.
Curve 2: 4.7 µF, 16 V.
Curve 3: 22 µF, 6.3 V.
Case size H ×W×T = 9.5 ×7×4 mm.
Tamb =25°C.
handbook, 4 columns
103
Z
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA492
10 1
10 2
2
3
1
Fig.21 Typical impedance as a function of frequency.
Curve 1: 0.47 µF, 40 V.
Curve 2: 3.3 µF, 25 V.
Curve 3: 10 µF, 16 V.
Curve 4: 33 µF, 6.3 V.
Case size H ×W×T = 9.5 ×7×5 mm.
Tamb =25°C.
handbook, 4 columns
103
Z
(Ω)
10 310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA493
10 1
10 2
2
3
4
1
1997 Nov 13 17
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Fig.22 Typical impedance as a function of frequency.
Curve 1: 1 µF, 40 V.
Curve 2: 4.7 µF, 25 V.
Curve 3: 47 µF, 6.3 V.
Case size H ×W×T = 9.5 ×8×5 mm.
Tamb =25°C.
handbook, 4 columns
103
Z
(Ω)
10310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA494
10 1
10 2
2
3
1
Fig.23 Typical impedance as a function of frequency at Tamb =25°C; case size 9.5 ×8×6 mm.
Curve 1: 10 µF, 25 V.
Curve 2: 22 µF, 16 V.
Curve 3: 68 µF, 6.3 V.
Case size H ×W×T = 9.5 ×8×6 mm.
Tamb =25°C.
handbook, 4 columns
103
Z
(Ω)
10310 410 7
f (Hz)
102
101
1
10 510 6
10 2
MRA495
10 1
10 2
2
3
1
1997 Nov 13 18
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, section
“Tests and Requirements”
.
Table 3 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb = 125 °C; UR= 6.3 to 25 V with UR
applied; UR= 35 and 40 V with UC
applied; 10000 hours
∆C/C: ±10%
tan δ≤1.2 ×spec. limit
Z≤1.2 ×spec. limit
IL5 ≤spec. limit
Useful life CECC 30302
subclause 1.8.1 Tamb = 125 °C;
IR applied and:
UR= 6.3 to 25 V with UR applied;
UR= 35 and 40 V with UC applied;
20000 hours
∆C/C: ±15%
tan δ≤1.5 ×spec. limit
Z≤1.5 ×spec. limit
IL5 ≤spec. limit
no short or open circuit,
no visible damage
total failure percentage: <1%
Shelf life (storage
at high temperature) IEC 384-4/
CECC 30302
subclause 4.17
Tamb = 125 °C; no voltage applied;
500 hours ∆C/C: ±10%
tan δ≤1.2 ×spec. limit
IL5 ≤1×spec. limit
Charge and
discharge IEC 384-4-2
subclause 9.21 106cycles without series resistance:
0.5 s to UR; 0.5 s to ground ∆C/C: ±5%
no short or open circuit,
no visible damage
Solvent resistance IEC 68-2-45
test XA
IEC 653
immersion: 5 ±0.5 minutes with or
without ultrasonic at 55 ±5°C
solvents: demineralized water and/or
calgonite solution (20 g/l)
visual appearance not affected
1997 Nov 13 19
Philips Components Product specification
Solid Al - electrolytic capacitors
Solid Al, Radial Pearl Miniature SAL-RPM 128
Extended vibration IEC 68-2-6
test Fc 10 to 2000 Hz; 1.5 mm or 20 g;
1 octave/minute; 3 directions;
1 sweep per direction; no voltage applied
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
∆C/C: ±5%
tan δ≤1.2 ×spec. limit
Z≤1.2 ×spec. limit
IL5 ≤1.5 ×spec. limit
Shock test IEC 68-2-27
test Ea half-sine or sawtooth pulse shape; 50 g;
11 ms; 3 successive shocks in each
direction of 3 mutually perpendicular
axes; no voltage applied
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
∆C/C: ±5%
tan δ≤1.2 ×spec. limit
Z≤1.2 ×spec. limit
IL5 ≤1.5 ×spec. limit
Passive
flammability test IEC 695-2-2 capacitor mounted to a vertical
printed-circuit board, one flame on
capacitor body; Tamb =20to25°C;
test duration = 20 s
after removing the test flame
from the capacitor, the
capacitor must not continue to
burn for more than 15 s; no
burning particles must drop
from the sample
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
