Product: SPIDER-SL-20-08T1999999SY9HHHH Configurator: SPIDER-SL /-PL configurator Configurator Description Reliably transmit large amounts of data across any distance with the SPIDER III family of industrial Ethernet switches. These unmanaged switches have plug-and-play capabilities to allow for quick installation and startup - without any tools - to maximize uptime. Technical Specifications Product description Type SSL20-8TX (Product code:SPIDER-SL-20-08T1999999SY9HHHH ) Description Unmanaged, Industrial ETHERNET Rail Switch, fanless design, store and forward switching mode , Fast Ethernet Part Number 942132002 Port type and quantity 8 x 10/100BASE-TX, TP cable, RJ45 sockets, auto-crossing, auto-negotiation, auto-polarity More Interfaces Power supply/signaling contact 1 x plug-in terminal block, 3-pin Network size - length of cable Twisted pair (TP) 0 - 100 m Network size - cascadibility Line - / star topology any Power requirements Current consumption at 24 V DC Max. 63 mA Operating Voltage 12/24 V DC (9.6 - 32 V DC) Power consumption Max. 1.5 W Power output in BTU (IT)/h 5.3 Diagnostics features Diagnostic functions LEDs (power, link status, data, data rate) Ambient conditions MTBF 2.218.157 h (Telcordia) Operating temperature 0-+60 C Storage/transport temperature -40-+70 C Relative humidity (non-condensing) 10 - 95 % Mechanical construction Dimensions (WxHxD) 38 x 102 x 79 mm (w/o terminal block) Weight 150 g Mounting DIN rail Protection class IP30 plastic Mechanical stability IEC 60068-2-6 vibration 3.5 mm, 5-8.4 Hz, 10 cycles, 1 octave/min 1 g, 8.4-150 Hz, 10 cycles, 1 octave/min IEC 60068-2-27 shock 15 g, 11 ms duration, 18 shocks EMC interference immunity EN 61000-4-2 electrostatic discharge (ESD) 4 kV contact discharge, 8 kV air discharge EN 61000-4-3 electromagnetic field 10V/m (80 - 3000 MHz) EN 61000-4-4 fast transients (burst) 2 kV power line, 4 kV data line 2kV power line; 4kV data line (SL-40-08T only 2kV data line) EN 61000-4-5 surge voltage power line: 2kV (line/earth), 1kV (line/line); 1kV data line EN 61000-4-6 Conducted Immunity 10V (150 kHz - 80 MHz) EMC emitted immunity EN 55022 EN 55032 Class A FCC CFR47 Part 15 FCC 47CFR Part 15, Class A Approvals Basis Standard CE, FCC, EN61131 Safety of industrial control equipment cUL 61010-1/61010-2-201 Scope of delivery and accessories Accessories Rail Power Supply RPS 30/80 EEC/120 EEC (CC), Wall mounting plate for DIN rail mounting (width 40/70 mm) Scope of delivery Device, terminal block, safety instruction Further Instructions Product Documentation https://www.doc.hirschmann.com/index.html Certificates https://www.doc.hirschmann.com/certificates.html (c) 2021 Belden, Inc All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.