SN54HC595 SN74HC595 www.ti.com SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 8-BIT SHIFT REGISTERS WITH 3-STATE OUTPUT REGISTERS Check for Samples: SN54HC595 SN74HC595 FEATURES 1 * * * * * * * * 8-Bit Serial-In, Parallel-Out Shift Wide Operating Voltage Range of 2 V to 6 V High-Current 3-State Outputs Can Drive Up To 15 LSTTL Loads Low Power Consumption: 80-A (Max) ICC tpd = 13 ns (Typ) 6-mA Output Drive at 5 V Low Input Current: 1 A (Max) Shift Register Has Direct Clear SN54HC595...J OR W PACKAGE SN74HC595...D, DB, DW, N, NS, OR PW PACKAGE (TOP VIEW) QB QC QD QE QF QG QH GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC QA SER OE RCLK SRCLK SRCLR QH DESCRIPTION QC QB NC VCC QA 4 3 2 1 20 1 9 18 SER 5 17 6 16 7 15 8 9 10 11 14 12 1 3 OE NC RCLK SRCLK SRCLR QD QE NC QF QG QH Both the shift register clock (SRCLK) and storage register clock (RCLK) are positive-edge triggered. If both clocks are connected together, the shift register always is one clock pulse ahead of the storage register. SN54HC595...FK PACKAGE (TOP VIEW) GND NC Q H' The 'HC595 devices contain an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state. NC - No internal connection 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1982-2009, Texas Instruments Incorporated SN54HC595 SN74HC595 SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 www.ti.com ORDERING INFORMATION (1) TA PACKAGE PDIP - N SN74HC595N SN74HC595D Reel of 2500 SN74HC595DR Reel of 250 SN74HC595DT Tube of 40 SN74HC595DW Reel of 2000 SN74HC595DWR SOP - NS Reel of 2000 SN74HC595NSR HC595 SSOP - DB Reel of 2000 SN74HC595DBR HC595 Tube of 90 SN74HC595PW Reel of 2000 SN74HC595PWR CDIP - J Tube of 25 SNJ54HC595J SNJ54HC595J CFP - W Tube of 150 SNJ54HC595W SNJ54HC595W LCCC - FK Tube of 55 SNJ54HC595FK SNJ54HC595FK TSSOP - PW (1) (2) TOP-SIDE MARKING Tube of 40 SOIC - DW -55C to 125C ORDERABLE PART NUMBER Tube of 25 SOIC - D -40C to 85C (2) SN74HC595N HC595 HC595 HC595 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. Table 1. FUNCTION TABLE INPUTS 2 FUNCTION SER SRCLK SRCLR RCLK OE X X X X H Outputs QA-QH are disabled. X X X X L Outputs QA-QH are enabled. X X L X X Shift register is cleared. L H X X First stage of the shift register goes low. Other stages store the data of previous stage, respectively. H H X X First stage of the shift register goes high. Other stages store the data of previous stage, respectively. X X X X Shift-register data is stored in the storage register. Submit Documentation Feedback Copyright (c) 1982-2009, Texas Instruments Incorporated Product Folder Link(s): SN54HC595 SN74HC595 SN54HC595 SN74HC595 www.ti.com SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 LOGIC DIAGRAM (POSITIVE LOGIC) OE RCLK SRCLR SRCLK SER 13 12 10 11 14 1D C1 R 3R C3 3S 15 2S 2R C2 R 3R C3 3S 1 2S 2R C2 R 3R C3 3S 2 2S 2R C2 R 3R C3 3S 3 2S 2R C2 R 3R C3 3S 4 2S 2R C2 R 3R C3 3S 5 2S 2R C2 R 3R C3 3S 6 2S 2R C2 R 3R C3 3S 7 QA QB QC 9 QD QE QF QG QH QH Pin numbers shown are for the D, DB, DW, J, N, NS, PW, and W packages. Copyright (c) 1982-2009, Texas Instruments Incorporated Product Folder Link(s): SN54HC595 SN74HC595 Submit Documentation Feedback 3 SN54HC595 SN74HC595 SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 www.ti.com TIMING DIAGRAM SRCLK SER RCLK SRCLR OE QA QB QC QD QE QF QG QH QH' NOTE: 4 implies that the output is in 3-State mode. Submit Documentation Feedback Copyright (c) 1982-2009, Texas Instruments Incorporated Product Folder Link(s): SN54HC595 SN74HC595 SN54HC595 SN74HC595 www.ti.com SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) VCC Supply voltage range IIK Input clamp current (2) -0.5 V to 7 V (2) IOK Output clamp current IO Continuous output current VI < 0 or VI > VCC 20 mA VO < 0 or VO > VCC 20 mA VO = 0 to VCC 35 mA Continuous current through VCC or GND Package thermal impedance (3) JA Tstg (1) (2) (3) 70 mA D package 73C/W DB package 82C/W DW package 57C/W N package 67C/W NS package 64C/W PW package 108C/W -65C to 150C Storage temperature range Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS (1) SN54HC595 VCC Supply voltage VCC = 2 V VIH High-level input voltage VCC = 4.5 V VCC = 6 V SN74HC595 MIN NOM MAX 2 5 6 MIN NOM MAX 2 5 6 1.5 1.5 3.15 3.15 4.2 VCC = 2 V VCC = 4.5 V UNIT V V 4.2 0.5 0.5 1.35 1.35 VIL Low-level input voltage VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V VCC = 6 V 1.8 VCC = 2 V t/v TA (1) (2) Input transition rise/fall time (2) Operating free-air temperature 1.8 1000 1000 VCC = 4.5 V 500 500 VCC = 6 V 400 400 -55 125 V -40 85 ns C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. If this device is used in the threshold region (from VILmax = 0.5 V to VIHmin = 1.5 V), there is a potential to go into the wrong state from induced grounding, causing double clocking. Operating with the inputs at tt = 1000 ns and VCC = 2 V does not damage the device; however, functionally, the CLK inputs are not ensured while in the shift, count, or toggle operating modes. Copyright (c) 1982-2009, Texas Instruments Incorporated Product Folder Link(s): SN54HC595 SN74HC595 Submit Documentation Feedback 5 SN54HC595 SN74HC595 SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 www.ti.com ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = -20 A VOH VI = VIH or VIL QH, IOH = -4 mA QA-QH, IOH = -6 mA QH, IOH = -5.2 mA QA-QH, IOH = -7.8 mA IOL = 20 A VOL VI = VIH or VIL QH, IOL = 4 mA QA-QH, IOL = 6 mA QH, IOL = 5.2 mA QA-QH, IOL = 7.8 mA II TA = 25C MIN TYP SN54HC595 MAX MIN MAX SN74HC595 MIN 2V 1.9 1.998 1.9 1.9 4.5 V 4.4 4.499 4.4 4.4 6V 5.9 5.999 5.9 5.9 3.98 4.3 3.7 3.84 3.98 4.3 3.7 3.84 5.48 5.8 5.2 5.34 5.48 5.8 5.2 5.34 4.5 V 6V MAX V 2V 0.002 0.1 0.1 0.1 4.5 V 0.001 0.1 0.1 0.1 6V 0.001 0.1 0.1 0.1 0.17 0.26 0.4 0.33 0.17 0.26 0.4 0.33 0.15 0.26 0.4 0.33 0.15 0.26 0.4 0.33 4.5 V 6V UNIT V VI = VCC or 0 6V 0.1 100 1000 1000 nA IOZ VO = VCC or 0, QA-QH 6V 0.01 0.5 10 5 A ICC VI = VCC or 0, IO = 0 6V 8 160 80 A 10 10 10 pF Ci 6 VCC Submit Documentation Feedback 2V to 6 V 3 Copyright (c) 1982-2009, Texas Instruments Incorporated Product Folder Link(s): SN54HC595 SN74HC595 SN54HC595 SN74HC595 www.ti.com SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 TIMING REQUIREMENTS over operating free-air temperature range (unless otherwise noted) VCC fclock Clock frequency SRCLK or RCLK high or low tw Pulse duration SRCLR low SER before SRCLK SRCLK before RCLK (1) tsu Setup time SRCLR low before RCLK SRCLR high (inactive) before SRCLK th (1) Hold time, SER after SRCLK TA = 25C MIN SN54HC595 MAX MIN MAX SN74HC595 MIN MAX 2V 6 4.2 5 4.5 V 31 21 25 6V 36 25 29 2V 80 120 100 4.5 V 16 24 20 6V 14 20 17 2V 80 120 100 4.5 V 16 24 20 6V 14 20 17 2V 100 150 125 4.5 V 20 30 25 6V 17 25 21 2V 75 113 94 4.5 V 15 23 19 6V 13 19 16 2V 50 75 65 4.5 V 10 15 13 6V 9 13 11 2V 50 75 60 4.5 V 10 15 12 6V 9 13 11 2V 0 0 0 4.5 V 0 0 0 6V 0 0 0 UNIT MHz ns ns ns This setup time allows the storage register to receive stable data from the shift register. The clocks can be tied together, in which case the shift register is one clock pulse ahead of the storage register. Copyright (c) 1982-2009, Texas Instruments Incorporated Product Folder Link(s): SN54HC595 SN74HC595 Submit Documentation Feedback 7 SN54HC595 SN74HC595 SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 www.ti.com SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) fmax SRCLK QH tpd QA-QH RCLK tPHL ten tdis SRCLR QH QA-QH OE QA-QH OE QA-QH tt QH VCC TA = 25C MIN TYP SN54HC595 MAX MIN MAX SN74HC595 MIN 2V 6 26 4.2 5 4.5 V 31 38 21 25 6V 36 42 25 29 MAX UNIT MHz 2V 50 160 240 200 4.5 V 17 32 48 40 6V 14 27 41 34 2V 50 150 225 187 4.5 V 17 30 45 37 6V 14 26 38 32 2V 51 175 261 219 4.5 V 18 35 52 44 6V 15 30 44 37 2V 40 150 255 187 4.5 V 15 30 45 37 6V 13 26 38 32 2V 42 200 300 250 4.5 V 23 40 60 50 6V 20 34 51 43 2V 28 60 90 75 4.5 V 8 12 18 15 6V 6 10 15 13 2V 28 75 110 95 4.5 V 8 15 22 19 6V 6 13 19 16 ns ns ns ns ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, CL = 150 pF (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) VCC tpd RCLK QA-QH ten QA-QH OE QA-QH tt TA = 25C MIN SN54HC595 MIN MAX SN74HC595 TYP MAX MIN MAX 2V 60 200 300 250 4.5 V 22 40 60 50 6V 19 34 51 43 2V 70 200 298 250 4.5 V 23 40 60 50 6V 19 34 51 43 2V 45 210 315 265 4.5 V 17 42 63 53 6V 13 36 53 45 UNIT ns ns ns OPERATING CHARACTERISTICS TA = 25C PARAMETER Cpd 8 Power dissipation capacitance Submit Documentation Feedback TEST CONDITIONS No load TYP UNIT 400 pF Copyright (c) 1982-2009, Texas Instruments Incorporated Product Folder Link(s): SN54HC595 SN74HC595 SN54HC595 SN74HC595 www.ti.com SCLS041H - DECEMBER 1982 - REVISED NOVEMBER 2009 PARAMETER MEASUREMENT INFORMATION VCC S1 Test Point From Output Under Test PARAMETER RL CL (see Note A) tPZH ten 1 k tPZL tPHZ tdis S2 RL tPLZ 1 k Reference Input VCC Data Input VCC 50% 10% 50% VCC 0V In-Phase Output 50% 10% tPHL 90% 90% tr tPHL Out-ofPhase Output 90% Closed Closed Open Open Open VCC th 90% 90% VCC 50% 10% 0 V tf 50% 10% tf Output Control (Low-Level Enabling) VCC 50% 50% 0V tPZL VOH 50% 10% V OL tf tPLZ Output Waveform 1 (See Note B) 90% tr VOH VOL VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES VCC VCC 50% 10% tPZH tPLH 50% 10% Open VOLTAGE WAVEFORMS SETUP AND HOLD AND INPUT RISE AND FALL TIMES 50% tPLH Open tr VOLTAGE WAVEFORMS PULSE DURATIONS 50% Closed 0V 0V Input Closed tsu 0V 50% Open 50% 50% tw Low-Level Pulse S2 50 pF or 150 pF LOAD CIRCUIT 50% S1 50 pF tpd or tt High-Level Pulse CL 50 pF or 150 pF VOL tPHZ Output Waveform 2 (See Note B) 50% 90% VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES FOR 3-STATE OUTPUTS NOTES: A. CL includes probe and test-fixture capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr = 6 ns, tf = 6 ns. D. For clock inputs, fmax is measured when the input duty cycle is 50%. E. The outputs are measured one at a time, with one input transition per measurement. F. t PLZ and tPHZ are the same as tdis. G. tPZL and tPZH are the same as ten. H. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms Copyright (c) 1982-2009, Texas Instruments Incorporated Product Folder Link(s): SN54HC595 SN74HC595 Submit Documentation Feedback 9 PACKAGE OPTION ADDENDUM www.ti.com 29-Aug-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-8681601EA ACTIVE CDIP J 16 1 TBD Call TI Call TI 5962-8681601VEA ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type 5962-8681601VFA ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type SN54HC595J ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type SN74HC595D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DBR ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DBRE4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DBRG4 ACTIVE SSOP DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DRG3 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) SN74HC595DRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DT ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DTE4 ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DTG4 ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Samples (Requires Login) 5962-86816012A CU SN (3) Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com Orderable Device (1) 29-Aug-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DWRE4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595DWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74HC595NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74HC595NSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595NSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595NSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595PW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595PWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595PWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595PWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595PWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC595PWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SNJ54HC595FK ACTIVE LCCC FK 20 1 TBD SNJ54HC595J ACTIVE CDIP J 16 1 TBD A42 SNJ54HC595W OBSOLETE TBD Call TI The marketing status values are defined as follows: Addendum-Page 2 Samples (Requires Login) SN74HC595DWE4 16 (3) POST-PLATE N / A for Pkg Type N / A for Pkg Type Call TI PACKAGE OPTION ADDENDUM www.ti.com 29-Aug-2012 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54HC595, SN54HC595-SP, SN74HC595 : * Catalog: SN74HC595, SN54HC595 * Enhanced Product: SN74HC595-EP, SN74HC595-EP * Military: SN54HC595 * Space: SN54HC595-SP NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Enhanced Product - Supports Defense, Aerospace and Medical Applications Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 29-Aug-2012 * Military - QML certified for Military and Defense Applications * Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74HC595DBR SSOP DB 16 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN74HC595DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN74HC595DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN74HC595DRG4 SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN74HC595DRG4 SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 SN74HC595DWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 SN74HC595NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 SN74HC595PWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74HC595DBR SSOP DB 16 2000 367.0 367.0 38.0 SN74HC595DR SOIC D 16 2500 367.0 367.0 38.0 SN74HC595DR SOIC D 16 2500 333.2 345.9 28.6 SN74HC595DRG4 SOIC D 16 2500 333.2 345.9 28.6 SN74HC595DRG4 SOIC D 16 2500 367.0 367.0 38.0 SN74HC595DWR SOIC DW 16 2000 366.0 364.0 50.0 SN74HC595NSR SO NS 16 2000 367.0 367.0 38.0 SN74HC595PWR TSSOP PW 16 2000 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated