MCC FR2A-L THRU FR2M-L omponents 20736 Marilla Street Chatsworth !"# $ % !"# TM Micro Commercial Components Features * 2.0 Amp Fast Recovery Rectifier 50 to 1000 Volts Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) * Epoxy meets UL 94 V-0 flammability rating * Moisture Sensitivity Level 1 * Higher Temp Soldering: 260oC for 10 Seconds At Terminals * Available on Tape and Reel * Halogen free available upon request by adding suffix "-HF" Maximum Ratings o o DO-214AA (SMB) (LEAD FRAME) Operating Temperature: -50 C to +150 C o o Storage Temperature: -50 C to +150 C MCC Catalog Number Device Marking FR2A-L FR2B-L FR2D-L FR2G-L FR2J-L FR2K-L FR2M-L FR2A FR2B FR2D FR2G FR2J FR2K FR2M Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V A Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V B C F H D G E o Electrical Characteristics @ 25 C Unless Otherwise Specified DIMENSIONS Average Forward Current Peak Forward Surge Current o IF(AV) 2.0A T J =90 C IFSM 50A 8.3ms half sine Maximum Instantaneous Forward Voltage VF 1.30V Maximum DC Reverse Current At Rated DC Blocking Voltage IR IFM =2.0A T A=25 oC* DIM A B C D E F G H INCHES MIN .160 .130 .006 .030 .205 .079 .077 .002 MAX .180 .155 .012 .060 .220 .103 .087 .008 MM MIN 4.06 3.30 0.15 0.76 5.21 2.01 1.96 0.05 MAX 4.57 3.94 0.31 1..52 5.59 2.62 2.21 0.20 NOTE SUGGESTED SOLDER PAD LAYOUT Maximum Reverse Recovery Times FR2A-L~FR2G-L FR2J-L FR2K-L~FR2M-L trr Typical Junction Capacitance Cj 5.0uA T J =25 oC 150ns 250ns 500ns IF =0.5A, IR=1.0A, Irr=0.25A 0.106" MAX 0.083" MIN 50pF 0.050" MIN Measured at 1.0MHz, VR =4.0V Note:1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. *Pulse test: Pulse width 300 usec, duty cycle 2%. www.mccsemi.com Revision: C 1 of 4 2013/08/20 MCC FR2A-L thru FR2M-L TM Micro Commercial Components Figure 1 Typical Forward Characteristics 20 Figure 2 Forward Derating Curve 10 3.0 6 4 2.5 2 25C Amps 2.0 1 .6 1.5 Amps .4 1.0 .2 .5 .1 Single Phase, Half Wave 60Hz Resistive or Inductive Load .06 0 .04 0 50 75 100 125 150 175 C .02 .01 .4 .6 .8 1.0 Average Forward Rectified Current - Amperesversus Ambient Temperature - C 1.4 12 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF TJ=25C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 Junction Capacitance - pFversus Reverse Voltage - Volts www.mccsemi.com Revision: C 2 of 4 2013/08/20 MCC FR2A-L thru FR2M-L TM Micro Commercial Components Figure 4 Maximum Non-Repetitive Forward Surge Current 90 75 60 45 Amps 30 15 0 1 2 4 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50 10 trr +0.5A 0 Pulse Generator Note 2 25Vdc 1 Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive www.mccsemi.com Revision: C 3 of 4 2013/08/20 MCC TM Micro Commercial Components Ordering Information : Device Packing Tape&Reel: 3Kpcs/Reel FR2A-LTP~FR2M-LTP Note : Adding "-HF" suffix for halogen free, eg. FR2A-LTP-HF~FR2M-LTP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 4 of 4 2013/08/20