o 7 5 5 4 3 2 | DRAWING MADE IN THIRO ANGLE PROJECTION VY THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION ,19 . Loc DIST REVISIONS COPYRIGHT 19 ay AMP INCORPORATED. ALL INTERNATIONAL RIGHTS RESERVED. AA | 24 ole | zone | ctr DESCRIPTION DATE APPD B | OBS -2; EC 0502-0773-97 16suNg8 |W WIRE RETAINER QUANTITY 2 GEL SEALANT > DIMENSTONS ARE MAXIMUM UNLESS OTHERWISE SPECIFIED. D HOLE EXTENDER > MATERIAL: SCREW - STAINLESS STEEL PLATED WITH 7.62 pm L[.000300] MINIMUM ZINC. 32.84 MODULE - POLYESTER MOLDING COMPOUND, tT. 231 NATURAL. 38.94 TAPE POLYURETHANE, TRANSPARENT. [1.334 LUG ASSEMBLY: LUG - POLYESTER MOLDING COMPOUND, BLACK; TERMINAL - COPPER ALLOY PLATED WITH 2.54pm [.000100] MINIMUM TIN-LEAD ALLOY OVER NICKEL FLASH. Y SEALANT - LIQUID GEL. MODULE 3. EACH WIRE ENTRY HOLE ACCEPTS ONE UNSTRIPPED DROP-WIRE CONDUCTOR: COMBINATION SLOT, PAN HEAD, SELF-TAPPING SCREW FITHER A SINGLE 18-1/2 AWG COPPER- NO.8 HEAD, 10 - 16 THREAD 3. 6540.51 [.38+.02] LONG STEEL 4.572 (.180] OUTSIDE INSULATION MAXIMUM DIAMETER OR A SINGLE 22 - 24 LUG ASSEMBLY AWG SOLID COPPER 0.762 [.030] OUTSIDE QUANTITY 2 INSULATION MINIMUM DIAMETER. DROP- WIRES WITH CONDUCTORS OTHER THAN THESE SHALL BE SUBMITTED TQ AMP PRODUCT ENGINEERS FOR APPLICATION APPROVAL. __ | RO T SEL SEALANT =<_| | aa | | cEL SEALANT 4. DROP-WIRE TERMINATION IS ACCOMPLISHED AS FOLLOWS: 37.2 [1.47] 4.1 WHEN TWO DROP-WIRES ARE 10 BE TERMINATED, ONE UNSTRIPPED CONDUCTOR FROM ONE DROP-WIRE IS FULLY INSERTED INTO EITHER WIRE ENTRY HOLE IN ONE LUG. Pr ape S.O08+0.25 uF [.20+.01] WIRE ENTRY HOLE ONE UNSTRIPPED CONDUCTOR FROM SECOND DROP-WIRE 1S THEN FULLY INSERTED . +O. g8-13+0.13 S 1.78+0.13 | INTO OTHER WIRE ENTRY HOLE OF SAME 40.39 [.070+.005] r330+_005] LUG. WHILE CONDUCTORS ARE HELD FIRMLY [1.59] IN PLACE, THIS LUG IS ROTATED APPROXIMATELY 70 UNTIL IT CONTACTS MODULE /oneine BUILT-IN STOP. PROCEDURE IS THEN 33.0240.13 C1.300+.005] 16.5140.13 [.650+. 005] je $_$_$______ REPEATED STARTING WITH INSERTION OF $3.68+0.13 SECOND CONDUCTOR FROM EACH DROP-WIRE /| C.145+.005] INTO WIRE ENTRY HOLES IN OTHER LUG. 4- _~ OPTIONAL POSITIONING POSTS 4.2 WHEN ONE DROP-WIRE IS TO BE TERMINATED, B ONE UNSTRIPPED CONDUCTOR IS FULLY INSERTED INTO EITHER WIRE ENTRY HOLE IN ONE LUG. WHILE CONDUCTOR IS HELD 14.3340.13 FIRMLY IN PLACE, LUG IS ROTATED O.7640.25 [.030+.010] * 2 PLC 4545 @7.B87+0.13 C.310+.005] OPTIONAL POSITIONING POST S _ .564+.005] ! @3.1840.13 9.6540.25 [.125+.005] * .38+.01] DEEP O.76+0.13 % 45+45 C.030+.005] 3 Sao | | ih | t 4 340.95 I |! [.130+.010] 1.440.123 C.055+.005] SUGGESTED MOUNT ING DIMENSIONS APPROXIMATELY 7O UNTIL [IT CONTACTS BUILT-IN STOP. THE SECOND UNSTRIPPED CONDUCTOR IS THEN FULLY [INSERTED INTO EITHER WIRE ENTRY HOLE IN OTHER LUG AND, WHILE CONDUCTOR 1S HELD FIRMLY IN PLACE, THIS LUG IS ROTATED UNTIL IT CONTACTS BUILT-IN STOP. YELLOW STRIPES ON LUG AND MODULE WILL BE ALIGNED WHEN IN CLOSED POSITION. STRIPES MUST BE FULLY ALIGNED 10 COMPLETE TERMINATION. 77325371 PART NO DO NOT SCALE PRINT. UNLESS SPECIFIED DIMENSIONS IN mm CINCHES] TOLERANCES ON : 2 PLC DEC + 3 PLC DEC + /\ ANGLES + DR 7-21-94 T. WOOTEN AIMIE2 AMP Incorporated CHK 19-13-94 BD. HUSSEY Harrisburg, PA 17105-3608 APPD 19-13-94 T. PIZZULO NAME MATERIAL A APPD 10-13-94 R. GUZMAN MODULE ASSEMBLY, 1 PAIR, PRODUCT SPEC 1086-30300 NONPROTECTED, GEL-FILLED, QUIET FRONT THIS DRAWING [S A CONTROLLED DOCUMENT FOR AMP INCORPORATED. [T [5 SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. FINISH A APPLICATION SPEC SIZE CAGE CODE DRAWING NO 1D} 00779 |6e775253 WEIGHT pacaAce De ] SHEET 7 OF 7 AMP 1756-3 REV 3-92 YY? 31-0CT-95 09:32:42 amp23644 /home/amp23644/edmmod | CUSTOMER DRAWING