TECHNICAL DATA
Firmware
iWRAP™ firmware including all relevant Bluetooth profiles
and simple control interface to access the Bluetooth
functionality
Standard HCI over UART/USB available
Possibility to develop custom firmware
Hardware
Size: 35 x 14 x 3,5 mm (L x W x H)
TX power : +20 dBm
RX sensitivity : -90 dBm
UART with hardware flow control
USB device interface (USB 2.0 compatible
6 x GPIO
1 x 8-bit AIO
Support for 802.11 coexistence
Product Codes
Development and Evaluation
WT41-A Evaluation Board:
Evaluation board with an integrated WT41
RS-232 and USB interfaces
SPI for upgrading the firmware and parameters
On- board PCM codec and 3,5mm audio jacks
16 pin I/O interface
Certications
Fully qualified Bluetooth 2.1 + EDR end product
EN300328, EN300489, FCC, Industry Canada
Information subject to changes 26/10/10
For more information about Bluegiga Technologies, please contact:
Bluegiga Technologies Oy
Sinikalliontie 5 A
02630 Espoo, Finland
Phone: +358 9 435 50 60
Fax: +358 9 435 50 660
www.bluegiga.com
sales@bluegiga.com
© Bluegiga Technologies 2000-2010.
Bluegiga Technologies takes no responsibility for any mistakes that
might appear in this document. It reserves the right to change devices,
software or specifications detailed here at any time without notice,
and does not make any commitment to update the information
contained here. Bluegiga products are not authorised for any use as
critical components in life support devices or systems.
Bluegiga Access Server, Access Point, iWRAP and WRAP THOR are
trademarks of Bluegiga Technologies.
The Bluetooth trademark and logo are registered trademarks and
are owned by the Bluetooth SIG, Inc.