3MTM DIN C-Form Plug .100 Standard Mount, Right Angle, Solder Tail Termination DIN 41612 Series C R ec e ON p h la T S c IN he e U d et b ED y 23 05 * Multi-pin count socket for VME, VXI and Multibus II daughter cards * Early mate late break (EMLB) grounding contacts for hot swapping * Expanded pin counts * Optional retention clips * Mates with C-form and R-form sockets * See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: March 26, 2007 Physical D IS Insulation Material: Flammability: Color: Contact Material: Plating Underplating: Wiping Area: Termination Area: Marking: Electrical TS-1132-B Sheet 1 of 4 Glass Filled Polyester (PCT) UL 94V-0 Gray or Black Copper Alloy 50 [ 1.27 m ] Min. Nickel (See Ordering Information) (See Ordering Information) Part Number and Date Code Contact Resistance: 20 m Max. Current Rating: 3.0 A @ 30C T-rise above ambient Insulation Resistance: 1 x 10 M min. at 500 VDC Environmental T Withstanding Voltage: 1 x 10 VAC for 1 minute Temperature Rating: -55C to +125C Process Temperature Rating: 260C per J-STD-020C Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN C-Form Plug .100 Standard Mount, Right Angle, Solder Tail Termination DIN 41612 Series D F O R S P E C IA L P IN A R R A N G E M E N T S C O N T A C T 3 M S A L E S R E P R E S E N T A T IV E S "X" "X " A .5 0 2 1 2.7 4 P IN A 1 .0 59 1.50 C R ec e ON p h la T S c IN he e U d et b ED y 23 05 .3 43 8 .71 .43 3 1 1 .0 0 C E .0 25 0.64 B .1 9 5 4 .9 5 .4 9 2 1 2 .5 0 .3 7 4 9 .5 0 .1 00 2 .54 .0 5 2 1 .3 2 .25 2 6 .4 0 .1 0 0 2.5 4 SE C T IO N X-X .1 0 0 2.5 4 .15 0 3 .8 1 .1 20 3 .05 IS In c h D RRX 'A ' S T Y L E R E T E N T IO N C L IP F O R .0 6 2" A N D .0 9 3" P C B T H IC K N E S S T Ordering Information [m m ] T o le ran c e U n le ss N o te d R R XL 'B ' S T Y LE R E T E N T IO N C L IP F O R .0 6 2" P C B T H IC K N E S S in c h .0 .0 0 .0 0 0 .1 .01 .0 0 5 [ ] D im en sio n s fo r R e fe re n ce O n ly DIN - XXX CP X - XXX - XXXX Plating and Insulator Color Options: See Table 3 Contact Quantity See Table 1 Contact Loading Pattern: A = A Row only B = Rows A & C Filled C = Rows A, B, & C Filled D = Rows A & B Filled E = B Row only SRX W IT H O U T R E T E N T IO N C LIP Termination Options: See Table 2 TS-1132-B Sheet 2 of 4 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN C-Form Plug .100 Standard Mount, Right Angle, Solder Tail Termination DIN 41612 Series Table 1 Load Pattern A B D E A B C D E A B C D E A B C D E A B C D E 2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10] 2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10] 2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10] 2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10] 2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10] 3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74] 3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74] 3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74] 3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74] 016 032 048 032 016 032 064 096 064 032 040 080 120 080 040 050 100 150 100 050 C R ec e ON p h la T S c IN he e U d et b ED y 23 05 Contact Quantity 3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74] 4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06] 4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06] 4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06] 4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06] 4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06] 5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46] 5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46] 5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46] 5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46] 5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46] Table 2 DIM "C" in (mm) 0.114 (2.90) 0.180 (4.57) 0.114 (2.90) 0.180 (4.57) 0.114 (2.90) 0.180 (4.57) Comments No retention clips No retention clips With "A" style retention clips With "A" style retention clips With "B" style retention clips With "B" style retention clips Table 3 Plating Suffix Plastic Color TG30 Gray TR Gray T D IS SOLDER TERMINATION OPTION No SR1 SR2 RR1 RR2 RR1L RR2L PRESS-FIT TERMINATION OPTION No NA MH HS KT 3M Interconnect Solutions http://www.3M.com/interconnects/ Black Solder Tail Terminations Plating Composition 0.76 m [30 "] Min. Au Contact Area (RIA E3 & C2 apply) 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over 0.08 m [3 "] Min. Au Contact Area 0.18 m [7 "] Min. PdNi Contact Area (RIA E3 & C2 apply) 2.54 m [100 "] Min. SnPb Tail Area 1.27 m [50 "] Min. Ni all over 0.76 m [30 "] Min. Au Contact Area 5.08 m [200 "] Min. Reflowed Matte Whisker (RIA E1 & C1 apply) Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over Black 0.08 m [3 "] Min. Au over 0.18 m [7 "] Min. PdNi Contact Area (RIA E1 & C1 apply) 5.08 m [200 "] Min. Reflowed Matte Whisker Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over Black 0.25 m [10 "] Min. Au Contact Area 5.08 m [200 "] Min. Reflowed Matte Whisker (RIA E1 & C1 apply) Mitigating Sn Term. Area 1.27 m [50 "] Min. Ni all over TS-1132-B Sheet 3 of 4 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM DIN C-Form Plug .100 Standard Mount, Right Angle, Solder Tail Termination DIN 41612 Series A .100 2.54 .209 5.31 0.200 5.08 C B A X 2 1 .100 2.54 0.100 TYP. 2.54 DRILLED HOLE. 2X l O 0.006 M A B C C R ec e ON p h la T S c IN he e U d et b ED y 23 05 -B- .004 O .110 2.79 0.10 E O DIM "F" D -C- PLATED THRU HOLE l O 0.004 M A B C RECOMMENDED PCB HOLE PATTERN DRILLED HOLE DIA. Cu THICKNESS in (mm) in (mm) HOLE "F" HOLE PLATING TABLE For TG and TR (Solder Tail Leads) OSP ENTEK Electrolitic Au Immersion Ag Thickness (in) m Thickness in (m) Thickness in (m) SnPb THICKNESS in (mm) FINISHED DIA. in (mm) 0.041 - 0.049 (1.04 - 1.24) T D IS HOLE PLATING TABLE For MH, HS and KT (Solder Tail Leads) Immersion Matte Sn DRILLED HOLE DIA. Cu THICKNESS OSP ENTEK Electrolitic Au Immersion Ag Thickness in (m) in (mm) in (mm) Thickness in (m) Thickness in (m) Thickness in (m) HOLE "F" FINISHED DIA. in (mm) 0.041 - 0.049 (1.04 - 1.24) TS-1132-B Sheet 4 of 4 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. C R ec e ON p h la T S c IN he e U d et b ED y 23 05 In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS D IS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS T Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-A CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. C R ec e ON p h la T S c IN he e U d et b ED y 23 05 In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS 20 Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. D IS Name and Content of Hazardous Substances or Elements Important Notice T All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-A (c) 3M 2007