3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Interconnect Solutions
http://www.3M.com/interconnects/
3MPak 100 Thru-Board Socket
.100″and .100″×.100″Straight, Solder Tails 929 Series
S3-40 contacts on one row, 4-80 on two row
SSingle hole board preparation simplifies
board layout
SNo solder mask preparation speeds
manufacturing assembly
STop mounting allows single pass for wave
soldering
TS-0814-02
Sheet 1 of 2
Date Modified:May 30, 2003
Physical
Insulation
Material: Glass Filled Polyester (PET)
Flammability: UL 94V-0
Color: Gray
Contact
Material: Copper Alloy
Plating
Underplating and U-Slot: 100 µ″ [2.54µm ] Nickel — QQ-N-290, Class 2
Wiping Area Options: See Ordering Information
Solder Tails: 100 µ″ [2.54µm ] Tin Lead — MIL-P-81728
Electrical
Current Rating: 2A
Insulation Resistance: >1×109Ω500 Vdc
Withstanding Voltage: 1000 Vrms at Sea Level
Environmental
Temperature Rating: -- 5 5 °C to 105°C
UL File No.: E68080
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3
Interconnect Solutions
http://www.3M.com/interconnects/
3MPak 100 Thru-Board Socket
.100″and .100″×.100″Straight, Solder Tails 929 Series
Contact Quantity Dimension A
+
0
0
0
[
+
0
0
0
]
One Row Two Row +0.00 [ +0.00 ]
--.025 [ --.64 ]
04 0.20 [5.08 ]
03 06 0.30 [7.62 ]
04 08 0.40 [10.16 ]
05 10 0.50 [12.70 ]
06 12 0.60 [15.24 ]
07 14 0.70 [17.78 ]
08 16 0.80 [20.32 ]
09 18 0.90 [22.86 ]
10 20 1.00 [25.40 ]
11 22 1.10 [27.94 ]
12 24 1.20 [30.48 ]
13 26 1.30 [33.02 ]
14 28 1.40 [35.56 ]
15 30 1.50 [38.10 ]
16 32 1.60 [40.64 ]
17 34 1.70 [43.18 ]
18 36 1.80 [45.72 ]
19 38 1.90 [48.26 ]
20 40 2.00 [50.80 ]
21 42 2.10 [53.34 ]
22 44 2.20 [55.88 ]
23 46 2.30 [58.42 ]
24 48 2.40 [60.96 ]
25 50 2.50 [63.50 ]
26 52 2.60 [66.04 ]
27 54 2.70 [68.58 ]
28 56 2.80 [71.12 ]
29 58 2.90 [73.66 ]
30 60 3.00 [76.20 ]
31 62 3.10 [78.74 ]
32 64 3.20 [81.28 ]
33 66 3.30 [83.82 ]
34 68 3.40 [86.36 ]
35 70 3.50 [88.90 ]
36 72 3.60 [91.44 ]
37 74 3.70 [93.98 ]
38 76 3.80 [96.52 ]
39 78 3.90 [99.06 ]
40 80 4.0 [101.60 ]
2Row
842 = Gold
972 = 100 µ″ [2.54µm]
Tin Lead
.125 ±
[3.18]
A
Notes:
1. It is recommended that the plated thru-hole on the ends be .062″to .063″. this will prevent the connector from floating
during the wave soldering process.
2. Integral solder mask plugs are removed after soldering by using the 3M Hand Tool 929013 with the 3M Molded Head
929025-0X-XX or 3M Hand Tool 929012 with the 3M Press 929050.
3. Do not hand solder this connector because the solder heat and volume of solder cannot be adequately controlled.
This would make the integral plugs difficult or impossible to remove.
4. The connector should be flow soldered such that it enters the solder wave, end first (width).
5. Request tech brief for proper application usage.
1Row
841 = Gold
971 = 100 µ″ [2.54µm]
Tin Lead
Contact Quantity:
(per row)
See Table
Gold Plating Thickness:
10 = Wiping Area10 µ″ [0.25µm]Gold
30 = Wiping Area 30 µ″ [0.76µm]Gold
(No entry required for Tin Lead plating)
.100 ±.003
[2.54]
TS-0814-02
Sheet 2 of 2
Inch
[mm]
±.005±.1 ±.01
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
929XXX-01-XX-XX
Recommended Solder
Flow Direction .040 Sq Typ
[1.02]
.100
[2.54]
.235
[5.96]
.09 Ref
[2.3] .062
[1.57] .100 Ref
[2.54]
.025 X .010 Typ
[ 0.64 X 0.25 ] Integral Solder
Mask Plugs
(See Note 1)
.015
[0.38]
.130
[3.30]
.010
.005
.060
[1.52]
.040
[1.02]
SeeNote1 [1.65 ]
∅.065 ±Typ
.005
.002
.075 Typ
[1.91]
Pad Size
.085 Typ
[2.16]
Pad Size
Recommended Mounting Hole Pattern
Ordering Information
.100 ±.003
[2.54]
.100 ±.003
[2.54]
[1.65 ]
∅.065 ±Typ
.005
.002
.085 Typ
[2.16]
Pad Size
.075 Typ
[1.91]
Pad Size
SeeNote1
+.010
--.005
.125
[3.18]
.040
[1.02]
.160
[4.06]
.100 Ref
[2.54]
Recommended Solder
Flow Direction
A.100
[2.54]
.040 Sq Typ
[1.02]
.200
[5.08]
Plating Options:
© 3M 2003
3
Electronic and Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/eisd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
