OS-CON Line-up Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability Technical data Series system diagram Selection guide Guidelines and precautions Surface mount type SVPC Surface mount type SVPF SVPE SVPS SVPD SVPC SVPB SVPA Items Condition Specifications (V) - 2.5 4.0 6.3 10 16 Surge voltage (V) Room temperature 3.3 5.2 8.2 12 18 Category temperature range () Capacitance tolerance 120Hz/20 M : 20 120Hz/20 Please see the attached characteristics list Rated voltage applied, after 2 minutes Please see the attached characteristics list 100kHz/20 Please see the attached characteristics list () Characteristics of impedance ratio at high temp. and low temp. -55 to 105 - Dissipation Factor (DF) Based the value at 100kHz, 20 105 Z/Z20 0.75 to 1.25 C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit 60, 90 to 95%RH, 1,000h, No-applied voltage SVP Radial lead type SXE SEPF SEPC SEQP SEP Resistance to soldering heat2 0.75 to 1.25 -55 Z/Z20 105, 2,000h, Rated voltage applied Endurance Damp heat(Steady state) SVQP RoHS directive/Halogen-free compliant Low ESR9m 30m Large capacitance2,700F Rated voltage Equivalent series resistance (ESR) SVPG Series Specifications Leakage current1 SXV Update VPS (230 X 75s) LC Within the initial limit C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) C/C Within 10% of the initial value (15% for 2.5V 4.0V) DF Within 1.3 times of the initial limit ESR Within 1.3 times of the initial limit LC Within the initial limit (after voltage processing) 1 In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 105. 2 Please refer to page 25 for reflow soldering conditions. Catalog Deletion and EOL series Marking and dimensions POSCAP Line-up 120 16 Selection guide B6, C6 size is PC, E7, E12, F12 size is SVPC Rated capacitance L Rated voltage Technical data Catalog Deletion and EOL models 43 R Size list F Surface mount type P C SVPC Size D code W H 003 (unit : mm) 0.2max Polarity marking Case No. Cathode Series D Guidelines and precautions RV 39 68 100 120 150 180 220 270 330 390 560 680 820 1,200 1,500 2,700 B6 C6 C6 E7 E12 E12 F12 4.0 B6 6.3 B6 B6 C6 C6 E7E12 E12 E12 C6 E7 E12 10 B6 C6 E7 E7 L W 0.2 H 0.2 C 0.2 R P 0.2 B6 5.0 5.9 5.3 5.3 6.0 0.60.8 1.4 C6 6.3 5.9 6.6 6.6 7.3 0.60.8 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.60.8 3.2 E12 8.0 11.9 8.3 8.3 9.0 0.81.1 3.2 F12 10.0 RV : Rated voltage 2.5 0.5 0.1 -0.4 16 B6 C6 C6 E7 E7 E12 12.6 10.3 10.3 11.0 0.81.1 4.6 OS-CON Line-up 16SVPC39M 16 39 10SVPC68M 10 68 6SVPC100M B6 6SVPC120MV 16 16SVPC100M 16 100 10 120 120 10 10SVPC120M 10SVPC120MV 16SVPC120M 16 10SVPC270M 10 4.0 4SVPC560MX 4.0 4SVPC1200M 4.0 4SVPC1500M 2.5 2R5SVPC820M 2.5 2R5SVPC1500M 2.5 2R5SVPC2700M 1200 12 10 820 9 8 SVPS SVPD SVPC SVPB SVPA SVQP SVP SXE SEPF SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up Guidelines and precautions Selection guide 500 15 750 15 5070 SVPF SVPE 1200 15 5150 SXV SVPG 960 15 5380 10 12 2700 500 15 4700 9 10 1500 1033 15 4700 10 12 1500 Reliability 864 15 5380 Characteristics 500 15 4700 8 9 560 500 12 4070 10 12 820 6.3 6SVPC820M 491 12 3370 14 660 12 3220 17 16 270 16 16SVPC270M 20 680 2.5 2R5SVPC680M 500 12 3220 Fundamental structure 500 12 3460 19 500 12 3220 19 22 560 4.0 4SVPC560M 22 390 6.3 6SVPC390M 300 12 3220 17 19 330 10 10SVPC330M 300 12 2900 19 22 270 300 12 3500 21 22 150 300 12 3160 23 27 120 16 16SVPC150M 300 12 2410 14 300 12 3160 Recommended soldering condition 415 12 2630 Packing specifications Radial lead type 300 12 2320 Products list Packing specifications SMD type 300 12 3390 13 16 560 2.5 2R5SVPC560M 15 390 2.5 2R5SVPC390MV 300 12 3160 22 25 390 2.5 2R5SVPC390M 300 12 2320 13 15 330 4.0 4SVPC330MV 21 330 4.0 4SVPC330MY 300 12 2600 18 300 12 2320 23 27 330 4.0 4SVPC330M 300 12 2490 15 300 12 2440 13 17 330 6.3 6SVPC330M 15 220 6.3 6SVPC220MV 300 12 2200 23 27 220 6.3 6SVPC220M 300 12 2800 Image of case size 300 12 2200 Series system diagram 300 12 1970 19 22 300 12 2730 23 27 300 12 2240 23 24 300 12 1970 22 25 68 16 16SVPC68MV 300 12 2660 26 30 300 12 2150 16 19 68 16SVPC68M 300 12 1970 20 24 12 2540 26 30 180 2.5 2R5SVPC180MV 300 17 20 180 2.5 12 20 23 180 1970 2350 26 30 150 26 18 21 150 300 21 25 150 2.5 2R5SVPC180MY F12 120 4.0 2R5SVPC180M E12 6.3 12 26 30 Leakage current (A)(max) After 2 minutes 1820 20 23 100 4.0 4SVPC150MV E7 100 4.0 4SVPC150M 4SVPC150MY C6 6.3 6.3 6SVPC100MY 30 DF (% max) 30 23 27 68 10 10SVPC68MV 35 39 16 16SVPC39MV 100kHz/20 Rated ripple current 300kHz/201 100kHz (mArms) at 105 Technical data Part number ESR (m) (max) Surface mount type Rated Rated voltage capacitance (V) (F) Radial lead type Size code Selection guide Guidelines and precautions SVPC series characteristics list 1350 Technical data 1 The ESR value in 300kHz is a reference one. Recommended land pattern dimension of PWB unit : mm Size code C B6 C6 a E7 b E12 F12 a b 1.4 c 7.4 1.6 2.1 9.1 1.6 2.8 11.1 1.9 2.8 11.1 1.9 4.3 13.1 1.9 Surface mount type Frequency coefficient for ripple current Frequency 120Hz f 1kHz 1kHz f 10kHz 10kHz f 100kHz 100kHz f 500kHz Coefficient 0.05 0.3 0.7 1 Red letters New models Catalog Deletion and EOL models 44