Toll Free: (800) 494-6104
Wiha Quality Tools
110
1000Volt
4 Pc. Proturn Insulated Pliers & Cutters Set
Insulation Standards According To EN/IEC 60900, ASTM F-1505-01,
DIN/ISO, NFPA70E Pliers drop-forged from special tool steel,
individually high frequency induction hardened, chrome and nickel
plated, mirror polished. In roll up pouch.
Item No. 323 91 Set includes the following:
32346 - 8” Lineman’s Pliers With Cutters
lbs. 3.4 32341 - 8” Long Nose Pliers With Cutters
32344 - 6.3” Diagonal Cutters
32340 - 10” Water Pump Pliers
*Pliers & Cutters are made in Taiwan
323 91
NEW
From Wiha
proturn
Item
No. mm Inch Pkg. wt.
323 47 200 8.0 1 .80
Proturn Insulated High Leverage Pliers. Insulation
According to VDE 0682/part 201, DIN 7437, EN/IEC 60900, ASTM
F-1505-01, NFPA70E, 1000 volt. Individually Tested. DIN ISO 5745
Pliers drop-forged from special tool steel, individually high frequency
induction hardened, chrome and nickel plated, mirror polished. Proturn
ergo soft grip handles for maximum comfort.
323
1000volt
Insulated High Leverage Pliers
Item
No. mm Inch Pkg. wt.
323 40 250 9.8 1 .80
Proturn Insulated Water Pump Pliers. Insulation According
to VDE 0682/part 201, DIN 7437, EN/IEC 60900, ASTM F-1505-01,
NFPA70E, 1000 volt rated. Individually Tested. DIN ISO 5745
Pliers drop-forged from special tool steel, individually high frequency
induction hardened, chrome and nickel plated, mirror polished. Proturn
ergo soft grip handles for maximum comfort.
323
1000volt
Insulated Water Pump Pliers
Pliers/Cutters Made in Taiwan
Screwdrivers Made in Germany
8 Pc. Pliers & Screwdriver Set. Insulation According to
VDE 0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01,
NFPA70E, up to 1000 volt. Individually Tested. Roll Out Pouch
Item# 32395 Set Includes: lbs. 4.12
32356 - 8.0” Combination Pliers 32364 - 6.3” Diagonal Cutters
32358 - 6.3” Long Nose 32370 - 10.0” Water Pump Pliers
47012 - Insulated Slotted 3.0(1/8”) 47101 - Insulated Phillips #1
47039 - Insulated Slotted 6.5(1/4”) 47102 - Insulated Phillips #2
323 95
1000Volt
WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.
Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature is
between -20 to +70OC. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.
NEW
From Wiha
proturn
proturn
proturn
Go To
Image Index
Go To
Numerical Index
I
N
D
E
X
SHOP
SHOP
SHOP SHOP
PREVIOUS NEXT
