HLG-120H-C 150W Single Output LED Power Supply series Features : Constant current design Universal AC input / Full range (up to 305VAC) Built-in active PFC function High efficiency up to 94% Protections: Short circuit / Over voltage / Over temperature Cooling by free air convection Output current adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (1~10Vdc or 10V PWM signal or resistance) Suitable for dry / damp / wet locations 5 years warranty (Note.5) 110 F M M IP65 IP67 HLG-120H-C350 A A : IP65 rated. Constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL OUTPUT HLG-120H-C350 HLG-120H-C500 HLG-120H-C700 HLG-120H-C1050 HLG-120H-C1400 RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA CURRENT ACCURACY 5.0% CONSTANT CURRENT REGION Note.6 215 ~ 430V 150V ~ 300V 107V ~ 215V 74V ~ 148V 54V ~ 108V RATED POWER 150.5W 150W 150.5W 155.4W 151.2W RIPPLE CURRENT 5% 1.5Vp-p 1Vp-p 1Vp-p 1Vp-p 2Vp-p RIPPLE & NOISE CURRENT ADJ. RANGE Can be adjusted by internal potentiometer (A type only) 175 ~ 350mA 250 ~ 500mA 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA LINE REGULATION 1% 1% 1% 1% 1% SETUP, RISE TIME 1000ms, 80ms / 115VAC at full load 16ms at full load HOLD UP TIME (Typ.) VOLTAGE RANGE Note.2 90 ~ 305VAC FREQUENCY RANGE 500ms, 80ms / 230VAC at full load 230VAC / 115VAC 127VDC ~ 431VDC 47 ~ 63Hz PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve) POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION THD< 20% when output loading50% at 115VAC/230VAC input and output loading75% at 277VAC input INPUT EFFICIENCY (Typ.) 94% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.6A / 115VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 94% 0.8 A / 230VAC 94% 0.7A / 277VAC 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC Constant current limiting, recovers automatically after fault condition is removed 475 ~ 495V 335 ~ 355V 240 ~ 260V 165 ~ 175V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. WORKING HUMIDITY 10 ~ 95% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 93.5% COLD START 50A(twidth=600s measured at 50% Ipeak) at 230VAC SHORT CIRCUIT PROTECTION OVER VOLTAGE 94% 120 ~ 130V -40 ~ +70 (Refer to "Derating Curve") -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.3 UL8750, CSA C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67 approved SAFETY & EMC WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (50% load) ; EN61000-3-3 EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE I/P-FG:2KVAC O/P-FG:1.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge L,N-FG: 4KV), criteria A 191.1K hrs min. MIL-HDBK-217F (25) 220*68*38.8mm (L*W*H) 1.04Kg; 12pcs/13.5Kg/0.8CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Derating may be needed under low input voltages. Please check the static characteristics for more details. 3. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1. 4. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 5. Refer to warranty statement. 6. Please refer to "DRIVING METHODS OF LED MODULE". 7. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:HLG-120H-C-SPEC 2015-05-11 HLG-120H-C 150W Single Output LED Power Supply Mechanical Specification Case No.994 series Unit:mm A Type:(HLG-120H-C_A) 220 196 12 34.2 Io ADJ. T case 68 30020 98 34 SJTW 16AWGx3C 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 9.4 9.6 30020 STW 16AWGx2C(for HLG-120H-C350) SJTW 16AWGx2C(for others) 4.2x4PL 38.8 T case: Max. Case Temperature. -V(Black) +V(Red) IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) B Type:(HLG-120H-C_B) 220 196 12 9.6 9.4 30020 34.2 68 T case SJTW 16AWGx2C 98 34 SJTW 16AWGx3C 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 30020 STW 16AWGx2C(for HLG-120H-C350) SJTW 16AWGx2C(for others) 4.2x4PL -V(Black) +V(Red) 38.8 T case: Max. Case Temperature. DIM+(Blue) DIM-(White) D Type(option):(HLG-120H-C_D) 220 196 12 34 34.2 SJTW 16AWGx3C T case 68 30020 9.4 T case: Max. Case Temperature. 98 30020 STW 16AWGx2C(for HLG-120H-C350) SJTW 16AWGx2C(for others) 4.2x4PL -V(Black) +V(Red) 38.8 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 9.4 9.6 IP67 rated. Timer dimming function, contact MEAN WELL for details. File Name:HLG-120H-C-SPEC 2015-05-11 HLG-120H-C 150W Single Output LED Power Supply series Block Diagram PFC fosc : 70KHz PWM fosc : 60KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. O.T.P. FG O.L.P. DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. Derating Curve Static Characteristics 100 100 90 Others 80 80 C500,C700 70 LOAD (%) LOAD (%) 60 40 20 -40 -20 -10 0 15 30 50 60 70 (HORIZONTAL) 60 50 40 90 AMBIENT TEMPERATURE () 100 125 135 145 155 165 175 180 200 230 305 INPUT VOLTAGE (V) 60Hz Power Factor Characteristic Constant Current Mode 1 0 .9 8 0 .9 6 PF 0 .9 4 277V 0 .9 2 230V 0 .9 115V 0 .8 8 0 .8 6 0 .8 4 50% 60% 70% 80% 90% 100% (150W) LOAD File Name:HLG-120H-C-SPEC 2015-05-11 150W Single Output LED Power Supply HLG-120H-C series EFFICIENCY vs LOAD (HLG-120H-C700A Model) HLG-120H-C series possess superior working efficiency that up to 94% can be reached in field applications. 95 EFFICIENCY (%) 92 89 86 277V 230V 83 115V 80 77 74 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE A typical LED power supply may work in "constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CC characteristic can be operated at CC mode (direct drive). In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Should there be any compatibility issues, please contact MEAN WELL. Vo(%) Constant Current region 50 100 Io (%) Typical LED power supply I-V curve File Name:HLG-120H-C-SPEC 2015-05-11 HLG-120H-C 150W Single Output LED Power Supply series DIMMING OPERATION FG (Green/Yellow) AC/L(Brown) AC/N(Blue) DIM+(Blue) DIM-(White) HLG-120H-C B Type -V(Black) +V(Red) Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. Please DO NOT connect "DIM-" to "-V". Reference resistance value for output current adjustment (Typical) Single driver 10K 20K 30K 40K 50K 60K 70K 80K 90K 100K Resistance Multiple drivers value (N=driver quantity for synchronized 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N dimming operation) Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN ----102%~108% 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. Dimming connection diagram for turning the lighting fixture ON/OFF : N FG L Switch Relay Adjuster 10K~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Green/ Yellow Brown Blue AC/L HLG-120H-C B Type AC/N DIM+ DIMV(-) V(+) Blue White Black Red LED Lighting Fixture Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-120H-C-SPEC 2015-05-11 HLG-120H-C 150W Single Output LED Power Supply series WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HLG-120H-C to operate in dry/wet/damp or outdoor environment. AC source HLG-120H-C I/P O/P Size Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. 5-PIN 5A/PIN M12-05 10A max. Size Pin Configuration (Female) M15 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-120H-C O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. File Name:HLG-120H-C-SPEC 2015-05-11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: HLG-120H-C350B HLG-120H-C500A HLG-120H-C1400A HLG-120H-C1050A HLG-120H-C1050B HLG-120HC700B HLG-120H-C350A HLG-120H-C500B HLG-120H-C1400B HLG-120H-C700A