SPEC NO: DSAL3679 REV NO: V.2 DATE: MAR/17/2010 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203000588
3.0mmx1.0mm RIGHT ANGLE
PHOTOTRANSISTOR
Part Number: APA3010P3BT-GX
Features
z3.0mmx1.0mm right angle SMT LED, 2.0mm thickness.
zMechanically and spectrally matched to the infrared emitting
LED lamp.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zTinned pads for improved solderability
zRoHS compliant.
Description
Made with NPN silicon phototansistor chips.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL3679 REV NO: V.2 DATE: MAR/17/2010 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203000588
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25° C
Symbol Parameter Min. Typ. Max. Units Test Conditions
VBR CEO Collector-to-Emitter Breakdown Voltage 30 V IC=100uA
Ee=0mW/c ㎡
VBR ECO Emitter-to-Collector Breakdown Voltage 5 V IE=100uA
Ee=0mW/c ㎡
VCE (SAT) Collector-to-Emitter Saturation Voltage 0.8 V IC=2mA
Ee=20mW/c ㎡
I CEO Collector Dark Current 100 nA VCE=10V
Ee=0mW/c ㎡
TR Rise Time (10％ to 90％ ) 15 us
VCE = 5V
IC=1mA
RL=1000Ω
TF Fall Time (90％ to 10％ ) 15 us
I (ON) On State Collector Current 0.1 0.3 mA
VCE = 5V
Ee=1mW/c ㎡
λ=940nm
Parameter Max.Ratings
Collector-to-Emitter Voltage 30V
Emitter-to-Collector Voltage 5V
Power Dissipation at (or below) 25°C Free Air Temperature 100mW
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
APA3010P3BT-GX
SPEC NO: DSAL3679 REV NO: V.2 DATE: MAR/17/2010 PAGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203000588
APA3010P3BT-GX
Recommended Soldering Pattern
(Units : mm; Toleranc e: ± 0.1)
Tape Specifications
(Units : mm)
Reel Dimension
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
SPEC NO: DSAL3679 REV NO: V.2 DATE: MAR/17/2010 PAGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203000588
PACKING & LABEL SPECIFICATIONS APA3010P3BT-GX
