WRAP THOR WT11 Bluetooth (R) Module Description WT11 is a next-generation, class 1, Bluetooth(R) 2.0+EDR (Enhanced Data Rates) module. It introduces three times faster data rates compared to existing Bluetooth(R) 1.2 modules even with lower power consumption! WT11 is a highly integrated and sophisticated Bluetooth(R) module, containing all the necessary elements from Bluetooth(R) radio to antenna and a fully implemented protocol stack. Therefore WT11 provides an ideal solution for developers who want to integrate Bluetooth(R) wireless technology into their design with limited knowledge of Bluetooth(R) and RF technologies. Key Features Bluetooth(R) Class 1 Two antenna options: integrated chip antenna or U.FL connector Enhanced Data Rates (EDR) with data throughput up to 2-3Mbps Support for Adaptive Frequency Hopping (AFH) and 802.11 co-existence USB version 2.0 WT11 module combined with Bluegiga's complete development, testing and verification service offering and excellent developer support, OEMs and designers ensure that their products reach the market rapidly and costeffectively in relation to time and resources. Bluegiga has extensive in-house knowledge of both software and hardware offering customers a single point of contact to all Bluetooth(R) related issues. By default WT11 module is equipped with powerful and easy-to-use iWRAP firmware. iWRAP enables users to access Bluetooth(R) functionality with simple ASCII commands delivered to the module over serial interface it's just like a Bluetooth(R) modem. Entering the world of wireless Bluetooth(R) technology could not be easier! With iWRAP software you have several implementation options: UART with bypass mode 8Mbits of external flash iWRAP can be configured to operate autonomously - Supported profiles: SPP, DUN, OBEX and HCI just like a Bluetooth(R) cable replacer Support for custom applications To create sophisticated applications - a host system can Industrial temperature range from -40C to +85C be used to control iWRAP with ASCII commands The GPIO interface in WT11 module can be used to RoHS compliant Simple iWRAPTM firmware for controlling Bluetooth(R) wireless technology Fully qualified end product with Bluetooth(R) 2.0+EDR, CE and FCC connect host and iWRAP Besides the iWRAP firmware Bluegiga also offers several other firmware options for WT11 module. Standard Host Command Interface (HCI) firmware is supported and an ideal solution for systems where the host system is capable running the entire Bluetooth(R) stack and profiles and WT11 is utilized as the physical radio over UART or USB interface. Preliminary information - details subject to change Technical details Firmware: Development and evaluation: iWRAPTM command interface for accessing the Bluetooth(R) functionality and for configuring the parameters with simple ASCII commands WT11-A Evaluation Kit EKWT11-A HCI firmware available for UART and USB interfaces CSR's BlueLab Professional SDK Possibility to use / develop custom firmware 128-bit Bluetooth(R) encryption available for all firmware options Other Bluegiga's products: WT12 Class 2 Bluetooth(R) module WRAP THOR(R) SMD module 2022-1 Hardware: WRAP THOR(R) Board-to-Board module 2022-1-B2B Bluetooth(R) Class 1 radio (range up to 200 meters) -Nominal output power +19 dBm -Nominal sensitivity -84 dBm -Uses 2.4 GHz ISM band -Based on CSR's BC04 chipset Integrated antenna or U.FL connector WRAP Access ServerTM 2291, 2293 Certifications: Bluetooth(R) 2.0 + EDR CE, FCC Host processor interface with UART or USB SPI interface for firmware and parameter upgrades Applications: Cable replacement 6xGPIO Point-of-sales systems PCM interface for Audio applications Barcode readers and pay terminals Supply voltage: regulated 3.2 - 3.4 VDC Telemetry and machine-to-machine devices PCB form factor: 35.3 x 14 x 2.3 mm Logistics and transportation systems Operating temperature: -40 C to +85 C Metal shielding to prevent RF interference Reference designs available for HCI, cable replacement and audio applications Product codes: Automotive inspection and measurement systems Medical systems Fitness and sports telemetry devices PDAs and other portable terminals iWRAP Firmware, chip antenna WT11-A-AI HCI Firmware (USB), chip antenna WT11-A-HCI Custom Firmware, chip antenna WT11-A-C iWRAP Firmware, U.FL WT11-E-AI HCI Firmware (USB), U.FL WT11-E-HCI Custom Firmware, U.FL WT11-E-C For more information about Bluegiga Technologies, please contact: Bluegiga Technologies Oy Sinikalliontie 11, 02630 Espoo PL 120, 02631 Espoo, Finland Phone: +358 9 435 50 60 Fax: +358 9 435 50 660 www.bluegiga.com sales@bluegiga.com WT11-E Evaluation Kit EKWT11-E PCs and laptops (c) Bluegiga Technologies 2000-2005. Bluegiga Technologies assumes no responsibility for any errors which may appear in this document, reserves the right to change devices, software or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. Bluegiga Technologies' products are not authorised for use as critical components in life support devices or systems. The WRAP, WRAP ACCESS SERVER, iWRAP and WRAP THOR trademarks are trademarks of Bluegiga Technologies, The Bluetooth trademark is owned by Bluetooth SIG, Inc., U.S.A. and is licensed to Bluegiga Technologies. Preliminary information - details subject to change