10K ECL Delay Modules Tap Delays (ns) Output Part No. Tot To2 T,3 To4 T)5 Rise Time ECLDLO25 5 10 15 20 25 4 ECLDLOSO 10 20 30 40 50 4 ECLDLO75 16 30 45 60 7 5 ECLDL100 20 40 60 80 100 6 ECLDL125 25 50 75 100 125 7 ECLDL150 30 60 90 120 150 7 ECLDL200 40 80 120 160 200 8 ECLDL250 50 100 150 200 250 10 ECLDL300 60 120 180 240 300 15 ECLDL350 70 140 210 280 350 15 ECLDL400 80 160 240 320 400 15 ECLDL450 90 180 270 350 450 20 ECLDL500 100 200 300 400 500 20 Delay Tolerance +1.5 ns or 5% whichever is greater. Delay Characteristics @ V,. = 5.2 +.01 Vdc, T, = 25C. Delay time measured @ 1.3V. 500 linear FPM airflow and output terminated with 50 ohm to 2.0 Vdc. Rise time measured @ 20 to 80% level of output pulse. For minimum input pulse widthcontact factory. Vee Td? Tos Tae Dimensions applicable to all modules (16) (15) (44) (13) on this page. | t e a) (3) (4) (5) (8) | Veo Td2 Td4 IN VEE 9c0 MAX a7 ato MAX MIN i: ie x WN AY T 002 010. = tLe [ee eee L Mas. 290 oe | eas! pp (16) T iy Step Delay Max.Delay Output Rise Part No. ns + ns hs + ns Time Max. (ns) ECLPG301 10+ .4 10.0 + 1.5 3.6 ECLPG302 2.0 + .6 17.0+15 3.6 ECLPG303 3.0 + 1.0 24.0415 3.6 ECLPG304 40+ 1.0 31.0 + 2.0 3.6 ECLPG305 5.0+ 1.5 38.0 + 2.0 3.6 ECLPG306 6.0+15 45.0+2.5 3.6 ECLPG307 7.0415 2.0+ 2.5 3.6 ECLPG308 8.0415 59.0 + 3.0 3.6 ECLPG309 90+ 1.5 66.0+ 3.5 3.6 ECLPG310 10.04 1.5 73.0 + 4.0 3.6 ECLPG315 15.0 + 1.5 108.0 + 5.0 5.0 ECLPG320 20.0 + 1.5 143.0 + 7.0 5.0 ECLPG325 25.0 + 1.5 178.0 + 9.0 5.0 ECLPG330 30.0 + 2.0 213.0 + 11.0 5.0 ECLPG335 35.0 + 2.0 248.0 + 12.0 5.0 ECLPG340 40.0425 283.0 + 14.0 5.0 ECLPG345 45.0 + 3.0 318.0 + 16.0 5.0 ECLPG350 50.0 + 3.5 353.0 + 17.0 5.0 Delay Characteristics measured at V,, = 5.2 + .01 Vdc, Ta = 25C. Delay time measured @ 1.3V level. 10k ECL Delay Modules Pm 10k ECL buffered input and output in 16-pin transfer-molded DIP. > 5-tap line provides delays from 5 ns to 500 ns. Temperature range 30to + 85C. > Transfer moldedreliable. > Fanout: 83 ECL loads. > Military models with temperature range 55 to + 125C and ceramic package IC. Add suffix M to part number. > Military models as above, but with ceramic package IC screened to Mil-Std 883C. Add suffix MX to part number. Military models as MX above, but with in-house burn-in and thermal shock, add suffix MY. 10k ECL Progammable Delay Modules Pm 10k ECL input and output. P 3-bit binary gives 7 equal step delays. Available in 18 step delays from Tns to 50 ns. Low inherent delay (T,); To = 3.0 1.5 ns. > Temperature range 30 to + 85C. > Fanout: 70 ECL loads. > Military models with temperature range 55 to + 125C and ceramic package IC. Add suffix M to part number. > Military models as above, but with ceramic package IC screened to Mil-Std 883C. Add suffix MX to part number. > Military models as MX above, but with in-house burn-in and thermal shock, add suffix MY. Notes Only the pins specified in the schematics are provided with each package. Pin numbers shown are for reference only and are not necessarily marked on Unit: Lead material is electro tin plated (alloy 42) or 500 linear FPM airflow and output terminated with 50 ohm to 2.0 Vdc. solder dipped. ee Rise time measured @ 20 to 80% level of output pulse. ; Allspecifications are subject to change without Input is internally terminated, therefore the delay line driver does not require a notice. : mere Ee pull-down resistor. For minimum input pulse widthcontact factory. B Technitrol 1952 East Allegheny Avenue, Philadelphia, PA 19134 USA 10 215-426-9105 Fax 215-426-2836