nEdition: Hans Turck GmbH & Co.KG nD-45472 Mulheim an der Ruhr nWitzlebenstrae 7 nTel. 0208 4952-0 nFax 0208 4952-264 nmore@turck.com nwww.turck.com Inductive sensor Bi15U-M30-AP6X-H1141 M30 x 1,5 46 36/5 LED 62 9 M12 x 1 threaded barrel, M30 x 1.5 Chrome-plated brass factor 1 for all metals degree of protection IP68 magnetic field immune high switching distance recessed mounting possible 3-wire DC, 10...30 VDC normally open, pnp output connector, M12 x 1 Wiring diagram Type Ident-No. Hysteresis Ambient temperature 15 mm flush (0,81 x Sn) mm 2% 10 % 15 %, -25 C v i +70 C 3... 15 % -30...+ 85 C Operating voltage Residual ripple 10... 30VDC 10 % Uss DC rated operational current No-load current I0 200 mA 15 mA Residual current Rated insulation voltage Short-circuit protection Voltage drop at Ie 0.1 mA 0.5 kV yes / cyclic 1.8V Wire breakage / Reverse polarity protection Output function Insulation class Switching frequency yes / complete 3-wire, normally open, pnp / 0.75 kHz Housing Dimensions Housing material Material active face Tightening torque of housing nut Connection Vibration resistance Shock resistance Degree of protection threaded barrel, M30 x 1.5 62 mm metal, CuZn, chrome-plated plastic, LCP-GF30 75 Nm Connectors, M12 x 1 55 Hz (1 mm) 30g (11 ms) IP68 Display switch state LED yellow pnp 1 BN + 3 BU 2 4 BK 3 BU 1 BN 4 BK Functional principle Inductive sensors are designed for wearfree and non-contact detection of metal objects. uprox+ sensors have considerable advantages due to their patented multi-coil system. They excel in highest switching distances, maximum flexibility and operational reliability as well as efficient standardisation. nEdition: * 29.03.2009 Rated operating distance Sn Mounting condition Assured sensing range Repeatability Temperature drift Bi15U-M30-AP6X-H1141 1636732 Hans Turck GmbH & Co.KG nD-45472 Mulheim an der Ruhr nWitzlebenstrae 7 nTel. 0208 4952-0 nFax 0208 4952-264 nmore@turck.com nwww.turck.com This Document Was Officially Certified By TURCK Inc. On 5/11/2009 4:02:27 PM nEdition: Hans Turck GmbH & Co.KG nD-45472 Mulheim an der Ruhr nWitzlebenstrae 7 nTel. 0208 4952-0 nFax 0208 4952-264 nmore@turck.com nwww.turck.com Inductive sensor Bi15U-M30-AP6X-H1141 Mounting instructions Distance D Distance W Distance T Distance S Distance G minimum distances 60 mm 45 mm 90 mm 45 mm 90 mm Diameter of the active area B O 30 mm All flush mountable uprox+ threaded barrel switches allow recessed mounting Safe operation is ensured if the sensor is recessed mounted by half a turn of the thread. T G S D nEdition: * 29.03.2009 W Hans Turck GmbH & Co.KG nD-45472 Mulheim an der Ruhr nWitzlebenstrae 7 nTel. 0208 4952-0 nFax 0208 4952-264 nmore@turck.com nwww.turck.com This Document Was Officially Certified By TURCK Inc. On 5/11/2009 4:02:27 PM nEdition: Hans Turck GmbH & Co.KG nD-45472 Mulheim an der Ruhr nWitzlebenstrae 7 nTel. 0208 4952-0 nFax 0208 4952-264 nmore@turck.com nwww.turck.com Inductive sensor Bi15U-M30-AP6X-H1141 Accessories Type code PN-M30 IdentNo. 6905308 Short text Dimension drawing Screw cap; material: Stainless steel A2 1.4305 (AISI 303) 36 M30 x 1,5 o 38 BST-30B 6947216 fixing clamp with dead-stop; material: PA6 M5 54 20 42 36 o 30 30 QM-30 6945103 quick-mount fixing clamp with dead-stop; material: chrome-plated brass male thread M36 x 1.5. Note: The switching distance of proximity switches can be reduced by the use of quick mounting brackets. 41/6 o 30 20,5 36 MW-30 6945005 mounting bracket; material: stainless steel A2 1.4301 (AISI 304) 30,5 5,5 19,1 23 11,2 34,8 57,2 20,6 2,2 BSS-30 6901319 63,5 44,5 10,3 fixing clamp; material: polypropylene 5 40 o 30 41 30 nEdition: * 29.03.2009 57 Hans Turck GmbH & Co.KG nD-45472 Mulheim an der Ruhr nWitzlebenstrae 7 nTel. 0208 4952-0 nFax 0208 4952-264 nmore@turck.com nwww.turck.com This Document Was Officially Certified By TURCK Inc. On 5/11/2009 4:02:27 PM