ñ Edition: • 29.03.2009
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
ñ Edition:
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruh r ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-2 64 ñ more@t urck.co m ñ www.turck.com
Inductive sensor
Bi15U-M30-AP6X-H1141
threaded barrel, M30 x 1.5
Chrome-plated brass
factor 1 for all metals
degree of protection IP68
magnetic field immune
high switching distance
recessed mounting possible
3-wire DC, 10…30 VDC
normally open, pnp output
connector, M12 x 1
Wiring diagram
Functional principle
Inductive sensors are designed for wear-
free and non-contact detection of metal
objects. uprox+ sensors have considerable
advantages due to their patented multi-coil
system. They excel in highest switching di-
stances, maximum flexibility and operatio-
nal reliability as well as efficient
standardisation.
1 BN
3 BU
4 BK
+
pnp
4 BK
3 BU 1 BN
2
Type Bi15U-M30-AP6X-H1141
Ident-No. 1636732
Rated operating distance Sn 15 mm
Mounting condition flush
Assured sensing range ð (0,81 x Sn) mm
Repeatability ð 2 %
Temperature drift ð ± 10 %
ð ± 15 %, ð -25 °C v ï +70 °C
Hysteresis 3… 15 %
Ambient temperature -30…+ 85 °C
Operating voltage 10… 30VDC
Residual ripple ð 10 % Uss
DC rated operational current ð 200 mA
No-load current I0ð 15 mA
Residual current ð 0.1 mA
Rated insulation voltage ð 0.5 kV
Short-circuit protection yes / cyclic
Voltage drop at Ieð 1.8V
Wire breakage / Reverse polarity protection yes / complete
Output function 3-wire, normally open, pnp
Insulation class ÷
Switching frequency ð 0.75 kHz
Housing threaded barrel, M30 x 1.5
Dimensions 62 mm
Housing material metal, CuZn, chrome-plated
Material active face plastic, LCP-GF30
Tightening torque of housing nut 75 Nm
Connection Connectors, M12 x 1
Vibration resistance 55 Hz (1 mm)
Shock resistance 30g (11 ms)
Degree of protection IP68
Display switch state LED yellow
36/5
46
62
LED
M30 x 1,5
9
M12 x 1
This Document Was Officially Certified By TURCK Inc. On 5/11/2009 4:02:27 PM
ñ Edition: • 29.03.2009
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
ñ Edition:
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ru hr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-2 64 ñ more@t urck.co m ñ www.turck.com
Inductive sensor
Bi15U-M30-AP6X-H1141
Mounting instructions minimum distances
Distance D 60 mm
Distance W 45 mm
Distance T 90 mm
Distance S 45 mm
Distance G 90 mm
Diameter of the active area B Ø 30 mm
All flush mountable uprox+ threaded barrel swit-
ches allow recessed mounting Safe operation is
ensured if the sensor is recessed mounted by half
a turn of the thread.
W
G
D
S
T
This Document Was Officially Certified By TURCK Inc. On 5/11/2009 4:02:27 PM
ñ Edition: • 29.03.2009
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
Accessories
ñ Edition:
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ru hr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-2 64 ñ more@t urck.co m ñ www.turck.com
Inductive sensor
Bi15U-M30-AP6X-H1141
Type code Ident-
No.
Short text Dimension drawing
PN-M30 6905308 Screw cap; material: Stainless steel A2 1.4305 (AISI
303)
BST-30B 6947216 fixing clamp with dead-stop; material: PA6
QM-30 6945103 quick-mount fixing clamp with dead-stop; material:
chrome-plated brass male thread M36 x 1.5. Note:
The switching distance of proximity switches can be
reduced by the use of quick mounting brackets.
MW-30 6945005 mounting bracket; material: stainless steel A2 1.4301
(AISI 304)
BSS-30 6901319 fixing clamp; material: polypropylene
36
M30 x 1,5
ø 38
ø 30
36
30
42
54
M5
20
41/6
ø 30
36
20,5
63,5
44,5
19,1
23
20,6
2,2
5,5
30,5
11,2
57,2
34,8
10,3
ø 30
41
30
57
40
5
This Document Was Officially Certified By TURCK Inc. On 5/11/2009 4:02:27 PM