DB101G THRU DB107G
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
MECHANICAL DATA
*This series is UL listed under the Recognized Component
Index, file number E-96005
*Surge overload rating of 50 Amperes peak
*Ideal for printed circuit board
*Reliable low cost construction utilizing molded plastic technique
*High temperature soldering guaranteed: 260oC/10 seconds,
0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension
*Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
Case : JEDEC DFM molded plastic body over passivated junction
Terminals : Plated leads solderable per MIL-STD-750,
Method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight : 0.04 ounes , 1.0 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature
unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum average forward rectified current @TA=40oC
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0 A
Maximum reverse current
at rated DC blocking voltage per element
@TA=25oC
@TA=125oC
Typical junction capacitance (NOTE 1)
Typical thermal resistance (NOTE 2)
Operating junction and storage temperature range
SYMBOLS
VRRM
I (AV)
IFSM
VF
IR
CJ
R JA
TJ,TSTG
DB
101G 102G 103G 104G 105G 106G 107G
50 100 200 400 600 800 1000
1.0
50
1.1
10
500
25
40
R JL 15
-55 to +150
UNITS
Volts
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
Volts
Amps
Amps
uA
pF
oC / W
oC
NOTES :(1)Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2)Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 X0.5" (13 X 13mm) copper pads
Zowie Technology Corporation
REV. : 0
DFM
*Dimensions in inches and (millimeters)
0.255(6.5)
0.245(6.2)
0.335(8.51)
0.075(1.90)
0.080(2.03)
0.050(1.27)
0.055(1.39)
0.320(8.12)
0.130(3.30)
0.045(1.14)
0.035(0.89)
0.023(0.58)
0.018(0.46)
0.120(3.05)
0.185(4.69)
0.150(3.81) 0.013(3.3)
0.0086(0.22)
0.205(5.2)
0.195(5.0)
0.315(8.00)
0.265(7.24)
0.350(8.9)
0.300(7.6)
RATINGS AND CHARACTERISTIC CURVES DB101G THRU DB107G
Zowie Technology Corporation
REV. : 0
FIG.1 - FORWARD CURRENT DERATING CURVE
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
1.50
1.25
1.00
0.75
0.50
0.25
IINSTANTANEOUS FORWARD CURRENT,
AMPERES
0.10
1.00
10.00
0.010.4 0.6 0.8 1.0 1.2 1.4 1.6
020 40 60 80 100 120 140 160
60Hz
RESISTIVE OR
INDUCTIVE LOAD
PULSE WIDTH=300uS
1% DUTY CYCLE
AMBIENT TEMPERATURE, oC
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
0.375" (9.5mm) LEAD LENGTH
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT,
AMPERES
NUMBER OF CYCLES AT 60Hz
TJ=25oC
Single Sine-Wave
(JEDEC Method)
0
10
20
30
40
50
1 10 100
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
0.1
.01 0 20
1.0
10
100
TJ=125oC
TJ=25oC
40 60 80 100 140120
FIG.5 - TYPICAL JUNCTION CAPACITANCE
TJ = 25oC
REVERSE VOLTAGE, VOLTS
.1
1
JUNCTION CAPACITANCE, pF
40
200
.2 .4 1.0 2 4 10 20 40 100
2
4
10
6
20
60
100