NTCLE203E3 www.vishay.com Vishay BCcomponents NTC Thermistors, Radial Leaded, Accuracy Line FEATURES QUICK REFERENCE DATA PARAMETER VALUE UNIT 2K to 470K 1; 2; 3; 5 % B25/85-value 3528 to 4570 K Tolerance on B25/85-value 0.5 to 2.0 % Resistance value at 25 C Tolerance on R25-value Operating temperature range at: Zero dissipation (continuously) -40 to +125 Zero dissipation (for short periods) (2) C 150 Maximum power dissipation Dissipation factor (1) 100 mW 2.2 mW/K 1.7 Response time (1) Thermal time constant 13 0.11 Mass * Accurate over a wide temperature range (tolerance on B-value down to 0.5 %) Available * Good stability over a long life * Excellent price/performance ratio * Low heat conductivity through 0.4 mm Ni-leads * UL recognized, file E148885 * RoHS compliant, available with or without exemption * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * Temperature measurement, sensing and control in industrial, consumer and telecom applications. For on-board sensing or accurate remote sensing DESCRIPTION These thermistors are made of NTC ceramic material. The device consists of a chip with two tinned nickel leads. The parts are coated and color band marked. Tape and reel versions available on request. s PACKAGING g The thermistors are packed in cardboard boxes; the smallest packing quantity is 500 units. Notes (1) Response time in silicone oil MS200/50. This is the time needed for the sensor to reach 63.2 % of the total temperature difference when subjected to a temperature change from 25 C in air to 85 C in oil. Thermal time constant by cooling from electrically pre-heated body (2) Valid for all types with the exception of the R 25 values 12 k, 22 k and 470 k DESIGN-IN SUPPORT For complete curve computation, please visit: www.vishay.com/thermistors/ntc-curve-list/. MARKING The thermistors are marked with color bands on a grey epoxy base coating; see Dimensions and "Electrical Data and Ordering Information". MOUNTING By soldering in any position. Not intended for potting. ELECTRICAL DATA AND ORDERING INFORMATION R25 () UL CODING SAP MATERIAL NUMBER SAP MATERIAL NUMBER R25-TOL. B25/85 B25/85-TOL. (WITH RoHS EXEMPTIONS) (WITHOUT RoHS EXEMPTIONS) APPROVED (see dimensions) ( %) ( %) (K) NTCLE203E3..... (1) NTCLE203E3...... (1) Y/N I II 2000 1, 2, 3, 5 3528 0.5 202*B0 202*B0A Y Orange Orange 2700 1, 2, 3, 5 3977 0.75 272*B0 272*B0A Y Red Red 4700 1, 2, 3, 5 3977 0.75 472*B0 472*B0A Y Green Green 5000 1, 2, 3, 5 3977 0.75 502*B0 502*B0A Y Black White 10 000 1, 2, 3, 5 3977 0.75 103*B0 103*B0A Y Blue Blue 12 000 1, 2, 3, 5 3740 2 123*B0 123*B0A Y Yellow Yellow 22 000 1, 2, 3, 5 3740 2 223*B0 223*B0A Y White White 47 000 1, 2, 3, 5 4090 1.5 473*B0 473*B0A Y Black Black 68 000 1, 2, 3, 5 4190 1.5 683*B0 683*B0A Y Grey Grey 100 000 1, 2, 3, 5 4190 1.5 104*B0 104*B0A Y Brown Brown 470 000 1, 2, 3, 5 4570 1.5 474*B0 474*B0A N Violet Violet Note (1) Replace * in SAP by J for 5 %, H for 3 %, G for 2 %, F for 1 % Revision: 26-Jun-17 Document Number: 29048 1 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCLE203E3 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters DERATING AND LONG TERM STABILITY 3 max. 3.6 max. I P (%) I 6.0 max. II 100 II 2 1.0 2.54 40 1.5 0 - 40 0 55 85 150 Tamb (C) 0.4 0.04 Power derating curve Note * Zero power is considered as measuring power max. 1 % of max. power LONG TERM STABILITY OF R25 AS A FUNCTION OF TEST DURATION AT MAXIMUM TEMPERATURE (150 C) 0.4 R 25 R 25 (%) 1 0.2 2 0 3 - 0.2 102 103 Test Duration (h) 104 Curves valid for 2.2 k to 10 k. Curve 1, 2 and 3 as max., average, and min. % drift on R25 LONG TERM STABILITY OF T AS A FUNCTION OF TEST DURATION AT MAXIMUM TEMPERATURE (150 C) 0.05 T (K) 1 0 2 - 0.05 - 0.1 102 3 103 Test Duration (h) 104 Curves valid for 2.2 k to 10 k. Curve 1, 2, and 3 as min., average, and max. temperature deviation Revision: 26-Jun-17 Document Number: 29048 2 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: NTCLE203E3103GB0 NTCLE203E3104GB0 NTCLE203E3473GB0 NTCLE203E3103FB0 NTCLE203E3104FB0 NTCLE203E3123JB0 NTCLE203E3202JB0 NTCLE203E3272JB0 NTCLE203E3474JB0 NTCLE203E3502JB0 NTCLE203E3272GB0 NTCLE203E3472GB0 NTCLE203E3474GB0 NTCLE203E3104HB0 NTCLE203E3123HB0 NTCLE203E3202HB0 NTCLE203E3474HB0 NTCLE203E3272FB0 NTCLE203E3472FB0 NTCLE203E3103HB0 NTCLE203E3103JB0