Through-hole resistors Professional & Flame-Proof Type Carbon Film Resistors Miniature Style [ FC0 Series ] FEATURES Power Rating 0.4W, 0.6W Resistance Tolerance 2%, 5% T.C.R. see Table 1 Flameproof Multi-layer Coating Meets UL-94V-0 Flameproof Feature Meets Overload Test UL-1412 INTRODUCTION DERATING CURVE The FC0 Series Carbon Film Professional & Flame-Proof Resistors are manufactured by coating a homogeneous film of pure carbon on high grade ceramic rods. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are welded to the end-caps. The resistors are coated with layers of green color lacquer. For resistors operated in ambient temperatures above 70C, power rating must be derated in accordance with the curve below. Rated Load (%) 70 155 C 100 80 60 40 20 20 40 60 80 100 120 140 160 Ambient Temperature (C) TABLE 1 TEMPERATURE COEFFICIENT STYLE Temp. Coefficient (ppm/C) FC0204, FC0207 under 100K 100K - 1M 1M - 10M -500~300 -700~0 -1,500~0 DIMENSIONS Unit: mm od H L oD STYLE DIMENSION Miniature L oD H od FC0204 3.40.3 1.90.2 282.0 0.450.05 FC0207 6.30.5 2.40.2 282.0 0.550.05 33 Note: ELECTRICAL CHARACTERISTICS STYLE FC0204 FC0207 Power Rating at 70C 0.4W 0.6W Maximum Working Voltage 200V 300V Maximum Overload Voltage 400V 600V Voltage Proof on Insulation 300V 500V Resistance Range 1 - 10M & 0 for E24 series value Operating Temp. Range -55C to +155C Temperature Coefficient see Table 1 Note: Special value is available on request ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload IEC 60115-1 4.13 2.5 times RCWV for 5 Sec. 0.75%+0.05 Voltage Proof on Insulation IEC 60115-1 4.7 in V-block for 60 Sec., test voltage by type By type Temperature Coefficient IEC 60115-1 4.8 -55C to +155C By type Insulation Resistance IEC 60115-1 4.6 in V-block for 60 Sec. >1,000M Solderability IEC 60115-1 4.17 2355C for 30.5 Sec. 95% Min. coverage Solvent Resistance of Marking IEC 60115-1 4.30 IPA for 50.5 Min. with ultrasonic No deterioration of coatings and markings Robustness of Terminations IEC 60115-1 4.16 Direct load for 10 Sec. in the direction of the terminal leads 2.5kg (24.5N) Periodic-pulse Overload IEC 60115-1 4.39 4 times RCWV 10,000 cycles (1 Sec. on, 25 Sec. off) 1.0%+0.05 Damp Heat Steady State IEC 60115-1 4.24 402C, 90-95% RH for 56 days, loaded with 0.1 times RCWV 3.0%+0.05 Endurance at 70C IEC 60115-1 4.25 702C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off) 3.0%+0.05 Temperature Cycling IEC 60115-1 4.19 -55C Room Temp. +155C Room Temp. (5 cycles) 1.0%+0.05 Resistance to Soldering Heat IEC 60115-1 4.18 2603C for 101 Sec., immersed to a point 30.5mm from the body 1.0%+0.05 Accidental Overload Test IEC 60115-1 4.26 4 times RCWV for 1 Min. No evidence of flaming or arcing Note: RCWV(Rated Continuous Working Voltage) = Power Rating x Resistance Value or Max. working voltage listed above, whichever less. Revision: 201304 88 Explanations Of Ordering Code MFR Code 1 - 3 Series Name -12 T F Code 7 Tolerance Code 8 Packing Style -05 = od0.5mm P = 0.02 % T = Tape/Box Code 9 Temperature Coefficient of Resistance -06 = od0.6mm A = 0.05 % R = Tape/Reel - = Base on Spec. 52- = 52.4mm -07 = od0.7mm B = 0.1 % B = Bulk A = 5 ppm/C 73- = 73mm 10K = 10,000 81- = 81mm 10M = 10,000,000 Code 4 - 6 Power Rating See Index F 52Code 10 - 12 Forming Type Code 13 - 17 Resistance Value 26- = 26mm 0R1 = 0.1 100R = 100 -08 = od0.8mm C = 0.25% B = 10 ppm/C -10 = od1.0mm D = 0.5 % C = 15 ppm/C 91- = 91mm -14 = od1.4mm F = 1 % S = 20ppm/C F = F Type -12 = 1/6W G = 2 % D = 25 ppm/C FK = FK Type -25 = 1/4W J = 5 % E = 50 ppm/C FKK = FKK Type 25S = 1/4WS K = 10 % F = 100 ppm/C FFK = F-form Kink -50 = 1/2W - = Base on Spec. G = 200 ppm/C M = M-Type Forming 50S = 1/2WS H = 250 ppm/C MB = M-form W/flat 100 = 1W I = 300 ppm/C MT = MT Type Forming 1WS = 1WS J = 350 ppm/C MR = MR Type 200 = 2W 2WS = 2WS 100R AV = AVIsert PN = PANAsert 204 = 0.4W 207 = 0.6W 300 = 3W 3WS = 3WS 3WM = 3WM 400 = 4W 500 = 5W 5WS = 5WS 5SS = 5WSS 700 = 7W 7WS = 7WS 10A = 10W 20A = 20W 30A = 30W 40A = 40W 50A = 50W 10S = 10WS 15A = 15W 25A = 25W 10B = 100W 25B = 250W EXCEPTION: * Cement series: * JPW series: <Code 8>: Special packing style code B: B ulk with wirewound or metal oxide sub-assembly for resistance value W: Bulk with ceramic based wirewound sub-assembly for resistance value M: Bulk with metal oxide sub-assembly for resistance value F: Bulk with Fiberglass based wirewound sub-assembly for resistance value <Code 10-12>: Without forming code Example: SQP500JB-10R <Code 13-17>: without resistance value code Example: JPW-06-T-52-