4707 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Fuseholder 1- or 2-pole C14 C18 70 C 70 C Approvals and Compliances Description - Panel Mount : Screw-on mounting from front or rear-side - 2 Functions : Appliance Inlet protection class I or II , fuse-links 5x20 mm 1 or 2pole - V-Lock notch standard - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. - Solder terminals 3.8 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm Characteristics - All single elements are already wired - With slotted screw type fuseholder - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Fuse carrier with IP65 protection degree Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Microsite Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 C to 70 C appliance inlet/-outlet from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Solder terminals or quick connect terminals Screw: max 6 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Rated Power Acceptance @ Ta 23 C Power Acceptance @ Ta > 23C Fuseholder C14 or C18 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 C, 10 A, Protection Class I or II 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 1.6 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 4707 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40006816 UL Approvals UL UL File Number: E93617 Connectors 1 4707 Power entry modules without line filter https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm] 36.4 44.0 18.9 27.6 2.4 31.2 34.0 36.0 3.4 6.1x90 E: solder terminals = 38 mm E: quick-connect terminals 6.3x0.8 = 41 mm E: quick-connect terminals 4.8x0.8 = 39.5 mm 2 Connectors E 2.7 4707 Power entry modules without line filter https://www.schurter.com /PG05 Panel cut-out for rear mounting Panel cut-out for front mounting o 3.5 max. R2.5 27.4 31.6 30.4 +0.2 0 36.0 0.1 +0.2 0 36.0 0.1 o 3.5 +0.2 0 max. R2.5 28.0 +0.2 0 Diagrams L L N L N L E E N Derating Curves 2-pole Admissible power acceptance in Watt 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = < < In 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta C 1.6 Admissible power acceptance in Watt per pole 1-pole 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = << In 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta C All Variants Protection Class Terminal Fuseholder Order Number I Quick connect terminals 6.3 x 0.8 mm 1-pole 4707.1000 I Solder terminals 1-pole 4707.1300 I Quick connect terminals 6.3 x 0.8 mm 2-pole 4707.2000 I Quick connect terminals 6.3 x 0.8 mm 2-pole 4707.2000.21 I Solder terminals 2-pole 4707.2300 Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/ Stock-Check-SCHURTER Packaging unit 100 Pcs Connectors 3 4707 Power entry modules without line filter https://www.schurter.com /PG05 Accessories Description Assorted Covers Rear Cover 0859.0047 4311.9403 Cord retaining kits Cord retaining strain relief Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 4707 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm, Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm, Screw clamps, Connector: IEC C13 4012 Connector further types to 4707 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS 01.12.2017 Power Cord further types to 4707 4 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 4707.1000 4707.2100 4707.2000 4707.1300 4707.2300 4707.2001