General Specifications
Flanged Resistors
10 Watts, 100
Model RFP-10-100RVV
Resistive Element: Thick film
Substrate: Beryllium oxide ceramic
Cover: Alumina ceramic
Mounting Flange: Copper, nickel plated per
QQ-N-290
Lead(s): 99.99% pure silver (.005” thk)
Outline Drawing
100
.109
.140
.058
.116 DIA. THRU
(2 PLACES)
.050
.250
.300
.500
.200
.100
Flanged Resistors
Features
DC - 6.0 GHz
10 Watts
BeO Ceramic
•Welded Silver Leads
Non-Nichrome Resistive
Element
100% Tested
1
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Notes: Tolerance is ±.010, unless otherwise specified. Operating
temperature is -55°C to +150°C (see chart). Designed to meet or
exceed applicable portions of MIL-E-5400. All dimensions are in
inches. Lead length 0.15” minimum.
Specifications subject to change without notice.
Electrical Specifications
Resistance Value: 100 ohms, ±5%
Frequency Range: DC - 6.0 GHz
Power: 10 Watts
Capacitance: 0.75 pF
VER. 12/5/01
Flanged Resistors
Model RFP-10-100RVV
Typical Performance
2
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Power Derating Suggested Mounting Procedures
MIN..025
(2 PLACES)
SUGGESTED STRESS RELIEF METHODS
BOARD LOWER
THAN LEAD. WITH LEAD.
BOARD EVEN
SCALE:
1. Make sure that the devices are mounted on flat surfaces
(.001” under the device) to optimize the heat transfer.
2. Drill & tap the heatsink for the appropriate thread size to
be used.
3. Coat heatsink with a minimum amount of high quality
silicone grease (.001” max. thickness).
4. Position device on mounting surface and secure using
socket head screws, flat & split washers. Torque screws to
the appropriate value. Make sure that the device is flat
against the heatsink. (Care should be taken to avoid
upward pressure of the leads towards the lid).
5. Solder leads in place using an SN63 type solder with a
controlled temperature iron (210°C).
SCALE:
BOARD HIGHER
THAN LEAD.THAN LEAD.
BOARD LOWER
NOT RECOMMENDED APPLICATION
CASE TEMPERATURE — °C
% OF RATED POWER
150125100755025
100
75
25
50
0
Anaren Product RFP-10H100RVV
Model RFP-10H100RVV Beryllium Oxide
·0 - 6000 MHz
·10 Watts
·100% Tested
·Extended Operating Temperature
Range
·Beryllium Oxide (BeO) Ceramic
Substrate
·Low Capacitance
·Non-Nichrome Thick Film Resistive
Element
·Welded Silver Leads
Frequency Resistor Power
Handling Resistor Value
MHz Watts Ohms/dB
0 - 6000 10 100
Resistor
Tolerance Capacitance Operating
Temperature Material
(Substrate)
%/dB pF deg C
5.00 0.750 -55 - 250 BeO
Specifications are subject to change without notice. Details...
·DCS
·PCS
·3G
·GSM
·Wilkinson Networks
·Need a customized part or
assembly?
·Want a sample?
·Want a quote?
Copyright 2001, Anaren Microwave, Inc.
http://www.anaren.com/products/product_detail.cfm?prod=869 [10/29/02 2:31:13 PM]