APT56M50B2 APT56M50L 500V, 56A, 0.10 Max N-Channel MOSFET Power MOS 8TM is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability. T-Ma x TM TO-264 APT56M50B2 APT56M50L D Single die MOSFET G S TYPICAL APPLICATIONS FEATURES * Fast switching with low EMI/RFI * PFC and other boost converter * Low RDS(on) * Buck converter * Ultra low Crss for improved noise immunity * Two switch forward (asymmetrical bridge) * Low gate charge * Single switch forward * Avalanche energy rated * Flyback * RoHS compliant * Inverters Absolute Maximum Ratings Symbol ID Parameter Unit Ratings Continuous Drain Current @ TC = 25C 56 Continuous Drain Current @ TC = 100C 35 A IDM Pulsed Drain Current VGS Gate-Source Voltage 30 V EAS Single Pulse Avalanche Energy 2 1200 mJ IAR Avalanche Current, Repetitive or Non-Repetitive 28 A 1 175 Thermal and Mechanical Characteristics Max Unit W PD Total Power Dissipation @ TC = 25C 780 RJC Junction to Case Thermal Resistance 0.16 RCS Case to Sink Thermal Resistance, Flat, Greased Surface TJ,TSTG Operating and Storage Junction Temperature Range TL Soldering Temperature for 10 Seconds (1.6mm from case) WT Package Weight Torque Mounting Torque ( TO-264 Package), 4-40 or M3 screw Microsemi Website - http://www.microsemi.com 0.11 -55 150 300 C/W C 0.22 oz 6.2 g 10 in*lbf 1.1 N*m 8-2011 Typ Rev C Min Characteristic 050-8073 Symbol Static Characteristics TJ = 25C unless otherwise specified Symbol Parameter Test Conditions Min VBR(DSS) Drain-Source Breakdown Voltage VGS = 0V, ID = 250A 500 VBR(DSS)/TJ Drain-Source On Resistance VGS(th) Gate-Source Threshold Voltage VGS(th)/TJ VGS = 10V, ID = 28A 3 Zero Gate Voltage Drain Current IGSS Gate-Source Leakage Current Dynamic Characteristics Forward Transconductance Ciss Input Capacitance Crss Reverse Transfer Capacitance Coss Output Capacitance VDS = 500V TJ = 25C VGS = 0V TJ = 125C Typ Max 0.60 0.085 4 -10 0.10 5 100 500 100 VGS = 30V Unit V V/C V mV/C A nA TJ = 25C unless otherwise specified Parameter gfs 3 VGS = VDS, ID = 2.5mA Threshold Voltage Temperature Coefficient IDSS Symbol Reference to 25C, ID = 250A Breakdown Voltage Temperature Coefficient RDS(on) APT56M50B2_L Min Test Conditions VDS = 50V, ID = 28A 4 Effective Output Capacitance, Charge Related Co(er) 5 Effective Output Capacitance, Energy Related Max 43 8800 120 945 VGS = 0V, VDS = 25V f = 1MHz Co(cr) Typ Unit S pF 550 VGS = 0V, VDS = 0V to 333V Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge td(on) Turn-On Delay Time tr td(off) tf 275 220 50 100 38 45 100 33 VGS = 0 to 10V, ID = 28A, VDS = 250V Resistive Switching VDD = 333V, ID = 28A Current Rise Time RG = 4.7 6 , VGG = 15V Turn-Off Delay Time Current Fall Time nC ns Source-Drain Diode Characteristics Symbol IS ISM Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Diode Forward Voltage ISD = 28A, TJ = 25C, VGS = 0V trr Reverse Recovery Time ISD = 28A 3 Qrr Reverse Recovery Charge Peak Recovery dv/dt Typ Max Unit 56 A G VSD dv/dt Min D 175 S diSD/dt = 100A/s, TJ = 25C 1 660 13.2 ISD 28A, di/dt 1000A/s, VDD = 333V, TJ = 125C V ns C 8 V/ns 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25C, L = 3.06mH, RG = 4.7, IAS = 28A. 050-8073 Rev C 8-2011 3 Pulse test: Pulse Width < 380s, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -2.04E-7/VDS^2 + 4.76E-8/VDS + 1.36E-10. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. APT56M50B2_L 200 V GS 100 = 10V T = 125C TJ = -55C J 90 V ID, DRIAN CURRENT (A) TJ = 25C 80 40 0 TJ = 150C TJ = 125C 60 50 40 30 20 5V 10 4.5V 0 0 5 10 15 20 25 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) 6V 70 0 Figure 2, Output Characteristics 175 NORMALIZED TO VGS = 10V @ 28A 1.5 1.0 0.5 125 TJ = -55C 100 TJ = 25C 75 TJ = 125C 50 25 0 0 -55 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 3, RDS(ON) vs Junction Temperature 0 2 4 6 8 10 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 4, Transfer Characteristics 20,000 60 C, CAPACITANCE (pF) TJ = 25C 50 Ciss 10,000 TJ = -55C TJ = 125C 40 30 20 1000 Coss 100 Crss 10 16 10 20 30 40 ID, DRAIN CURRENT (A) Figure 5, Gain vs Drain Current 100 200 300 400 500 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 6, Capacitance vs Drain-to-Source Voltage 12 VDS = 100V 10 VDS = 250V 8 6 VDS = 400V 4 2 0 0 175 ID = 28A 14 0 10 50 50 100 150 200 250 300 350 Qg, TOTAL GATE CHARGE (nC) Figure 7, Gate Charge vs Gate-to-Source Voltage 150 125 100 TJ = 25C 75 TJ = 150C 50 25 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 8, Reverse Drain Current vs Source-to-Drain Voltage 8-2011 0 Rev C 0 ISD, REVERSE DRAIN CURRENT (A) gfs, TRANSCONDUCTANCE 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE 2.0 70 VGS, GATE-TO-SOURCE VOLTAGE (V) VDS> ID(ON) x RDS(ON) MAX. 150 ID, DRAIN CURRENT (A) RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE Figure 1, Output Characteristics 2.5 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) 050-8073 ID, DRAIN CURRENT (A) 120 = 7,8 & 10V GS 80 160 APT56M50B2_L 250 250 100 100 IDM ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) IDM 13s 10 100s 1ms Rds(on) 10ms 100ms DC line 1 TJ = 125C TC = 75C 0.1 1 13s 1ms 10ms Rds(on) 100ms DC line TJ = 150C TC = 25C 1 0.1 10 100 600 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area 100s 10 Scaling for Different Case & Junction Temperatures: ID = ID(T = 25C)*(TJ - TC)/125 C 1 10 100 600 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area 0.16 D = 0.9 0.14 0.7 0.12 0.10 0.5 Note: 0.08 P DM ZJC, THERMAL IMPEDANCE (C/W) 0.18 0.3 0.06 t2 SINGLE PULSE 0.1 0.05 0.04 t1 = Pulse Duration t Duty Factor D = 1 /t2 Peak T J = P DM x Z JC + T C 0.02 0 10-5 t1 10-4 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (seconds) Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration 1.0 TO-264 (L) Package Outline T-MAXTM (B2) Package Outline e3 100% Sn Plated 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 15.49 (.610) 16.26 (.640) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.38 (.212) 6.20 (.244) 5.79 (.228) 6.20 (.244) Drai n Drai n 20.80 (.819) 21.46 (.845) 8-2011 4.50 (.177) Max. 0.40 (.016) 1.016(.040) 25.48 (1.003) 26.49 (1.043) 2.87 (.113) 3.12 (.123) 2.29 (.090) 2.69 (.106) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) 19.81 (.780) 21.39 (.842) Gate Drai n 050-8073 Rev C Source 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters (Inches) 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters (Inches) 2.29 (.090) 2.69 (.106) Gate Drai n Source