1
GT8E Series
2010.9
NEW
2mm pitch, high reliability with lock, board to cable and cable to cable connector
■Overview
The GT8E series comes with a 2mm pitch lock, for discreet cable, board-to-
cable and cable-to-cable connectors. It is highly reliable in terms of
vibration, heat and environmental resistance, and is used in applications
such as industrial equipment, which are exposed to harsh vibration, in-
vehicle equipment requiring high heat resistance, and so on.
■Features
1. High reliability
The GT8E series has high reliability in the following 5 aspects, namely
vibration resistance, thermal shock resistance and so on, and is usable in
industrial and in-vehicle equipment exposed to harsh environments. (It
meets the test conditions for various in-vehicle equipment)
q
Vibration resistance: Contact resistance is stable during the vibration test
With the female terminal featuring an airtight dimple mechanism, the
contact point portion area is minimized, and contact pressure is enhanced.
wThermal shock resistance: Usable under harsh temperature
environments
Test conditions: (-40ç: 30 minutes ➝normal temperature: 5 minutes ➝
105ç: 30 minutes ➝normal temperature: 5 minutes)
It has undergone 1000 cycles.
eHeat resistance: Usable up to 105ç
PBT and PPS are used in molds, and usable up to 105ç.(including
temperature increase at power distribution)
rHalf joint prevention
With an audibly clicking lock, and inertia lock via a mechanical lock
mechanism, firm connection is ensured. Also, the full lock mechanism
means it resists tension and vibration. (Figure 1)
tEnvironment resistance
When mated status, it passed the sulfite gas resistance test
(concentration 500ppm, 8 hours).
2. Improved fixation power of the crimp terminal
The waterproof relay type is usable with retainer equipped, and high
retention against removal is ensured when the cable is pulled.
3. Decent variation
- Straight DIP type - Right angle SMT type
- Right angle DIP type - In-line type (Waterproof)
4. Space saving
The pin header includes both SMT and DIP types. Exclusive reinforcing clasps
are used instead of screws ensuring high peel strength and saving space.
5. Reduction of implementation man-hours
In SMT type pin headers, the lead reflow type reinforcing clasps, which are
available for reflow soldering, are used. As well as ensuring high peel
strength, implementation can be performed via a one-time reflow, thus
reducing the man-hours required in comparison to screw type connectors.
(Figure 2)
Soldering can be applied to the land pattern and through hole at
the same time, reinforcing the clasp and the SMT terminal via a
one-time reflow process.
Compared to the conventional reinforcing clasp used in SMT
implementation, higher peel strength is ensured.
Lead reflow
Land pattern
Connector
implementation
area
Through hole
Mechanical lockMechanical lock
Half mating prevention mechanism
Enlarged lock form to improve workability, and with an audibly
clicking lock, and inertia lock via a mechanical lock mechanism,
firm connection is ensured.
Excellent lock strength, vibration resistance
Lock strength is guaranteed up to a standard value of 98N, while
it also resists vibration and cable tension. The vibration
resistance also cleared the test for harsh vehicles.
Mechanical lock mechanism
Figure 1
Figure 2
2
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
■Specifications
Ratings Voltage rating 30 Vrms AC
Current rating 250V AC
3A
Storage temperature range
Operating temperature range -40 to +105°C (Note 1)
-40 to +105°C (Note 1)
Note 1: Includes temperature rise caused by current flow.
Note 2: Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
Item Specification Conditions
1.
Insulation resistance
2.
Withstanding voltage
3.Contact resistance
4.Durability
5.Vibration
6.Shock
7.Lock strength
8.Humidity
9.Temperature cycle
10.
Resistance tosoldering heat
100Mø min.
No flashover or insulation breakdown
30mø max
Contact resistance 60 mø max.
No electrical discontinuity of 10µs or longer
No electrical discontinuity of 10µs or longer
During applying,mating completely
After applying,no deffect of mating parts.
Contact resistance60 mø max.
Insulation resistance: 100 Mø min.
Contact resistance50 mø max.
Insulation resistance: 500 Mø min.
No deformation of affecting performance
500 V DC
650 Vrms AC / 1 minute
1A DC
30 cycles
Frequency: 20 to 200 Hz, single amplitude of 43.1m/s2,
at 3hours for 3 directions
Frequency: 20 to 50 Hz, 66.6m/s2,
at 1hours
Applying a pull force the mating axially at 98N max.
96 hours at of 60°, and humidity of 90 to 95%
-40ç➝5 to 35ç➝+85ç➝5 to 35ç
Time:30min. ➝5min. ➝30min. ➝5min. 1000 cycles
■Materials
■Connector Mating Combinations
qStraight DIP
Pin header
Socket
Socket
wRight angle DIP
rIn lineeRight angle SMT
Socket
Socket
Pin header
Plug
Pin header
Insulator PBT or PPS Color:Black UL94V-0
Header Contact Brass Tin plated or Tin-copper plated -----------------
Metal fittings Brass Tin plated or Tin-copper plated -----------------
Socket Insulator PBT Color:Black -----------------
Crimping Contact for Socket Contact Phosphor bronze Tin plated -----------------
In-line plug Insulator PBT Color:Black UL94V-0
Crimping contact for in-line plug Contact Brass or Copper alloy Tin plated
Retainer Insulator PBT Color:Dark gray -----------------
Bushing Insulator Silicon rubber Color:White -----------------
Product Part Material Finish Remarks
3
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
■Straight pin header (DIP)
●Full lock type
C
9.5
3±0.25
P=2±0.15
A±0.2
3±0.212.1
4.5
B±0.15
7-Ø0.8
+0.8
0
(through hole)
6-Ø1.2+0.1
0
(
through hole
)
P=2±0.05
A±0.05
4.3±0.05
B±0.05
6-land diamater
Ø1.9
7-land diamater
Ø1.75
■Recommended PCB
Mounting Pattern
Type
qStraight DIP
wRight angle DIP
eRight angle SMT
rIn line (Waterproof)
GT8E-*P-DSA
GT8E-*P-DS
GT8E-*DP-DS
GT8E-8DP-2H
GT8E-2P-2H
GT8E-8/2P-2H
GT8E-8/5P-2H
GT8E-8P-HU
GT8EW-4P-HU
GT8E-*S-HU
GT8E-2S-2C
GT8E-*S-HU
GT8E-*DS-HU
GT8E-8DS-2C
GT8E-2S-2C
GT8E-8S-2C, GT8E-2S-2C
GT8E-8S-2C, GT8E-5S-HU
GT8E-8S-2C
GT8EW-4S-HU
Pin Header Socket
Part Number
GT8E-4P-DSA
GT8E-7P-DSA
758-0065-0
758-0066-3
4
7
11.98
18.98
6
12
14.4
21.4 1
CL No. Number of
contacts A B C Packaging
Note : GT8E-*P-DSA mates GT8E-*S-HU.
All dimensions: mm
4
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
11.1±0.2
12.85±0.3
B
A
4.5±0.15
P=2±0.15
C
D
(12.5)
3±0.25
3±0.25
7±0.3
*
All dimensions: mm
Part Number
GT8E-2P-DS
GT8E-3P-DS
GT8E-4P-DS
GT8E-5P-DS
GT8E-6P-DS
GT8E-7P-DS
GT8E-8P-DS
GT8E-10P-DS
758-0040-0
758-0057-2
758-0041-2
758-0058-5
758-0042-5
758-0059-8
758-0043-8
758-0044-0
2
3
4
5
6
7
8
10
13
13.7
14.4
17.8
18.4
21.4
22.4
26.4
9.15
9.85
10.55
13.95
14.55
17.55
18.55
22.55
2
4
6
8
10
12
14
18
10.58
11.28
11.98
15.38
15.98
18.98
19.98
23.98
2
4
6
8
10
12
14
18
10.58
11.28
11.98
15.38
15.98
18.98
19.98
23.98
1
CL No.
Number
of
contacts
A
dimension Telerace
(±0.3)
B
dimension Telerace
(±0.3)
C
dimension Telerace
(±0.15)
D
dimension Telerace
(±0.2)
E
dimension Telerace
(±0.05)
F
dimension Telerace
(±0.05)
Packaging
Note 1 : Applicable housing is GT8E-*S-HU.
Note 2 : GT8E-2P-DS mates with GT8E-2S-2C.
■Right angle pin header (DIP)
●Full lock type (2 to 10 pos. / Single row)
P=2±0.05
E
4.3±0.05
6.25±0.05
10-Ø0.8
+0.1
0
(through hole)
10-land diamater Ø1.75
6-Ø1.2+0.1
0
(through hole)
6-land diamater
Ø1.9
F
1
10
■Recommended PCB
Mounting Pattern
■
Fully mated connector
assemblies
Color:Black
Tin plated
Tin plated
PBT(Housing)
Brass(Contact)
Brass(Metal fitting)
Material Finish
3±0.25
11.1±0.2
14.85±0.3
3±0.25
2±0.2
B
A
4.5±0.15
P=2±0.15
C
D
9.83±0.3
(12.5)
10.5±0.5
*
All dimensions: mm
Part Number
GT8E-12DP-DS
GT8E-16DP-DS
GT8E-20DP-DS
GT8E-24DP-DS
758-0045-3
758-0060-7
758-0046-6
758-0053-1
12
16
20
24
22.4
27.25
30
34
18.55
23.6
26.35
30.35
14
18
22
26
19.98
25.03
27.78
31.78
14
18
22
26
19.98
25.03
27.78
31.78
1
CL No.
Number
of
contacts
A
dimension Telerace
(±0.3)
B
dimension Telerace
(±0.3)
C
dimension Telerace
(±0.15)
D
dimension Telerace
(±0.2)
E
dimension Telerace
(±0.05)
F
dimension Telerace
(±0.05)
Packaging
Note : Applicable housing is GT8E-*DS-HU.
●Full lock type (12 to 24 pos. / Double row)
2±0.05
6.25±0.05
24-land diamater Ø1.75
24-Ø0.8
+0.1
0
(through hole)
6-Ø1.2
+0.1
0
(through hole)
4.3±0.05
F
P=2±0.05
E
1
14
1524
6-land diamater
Ø1.9
■Recommended PCB
Mounting Pattern
■
Fully mated connector
assemblies
Color:Black
Tin plated
Tin plated
PBT(Housing)
Brass(Contact)
Brass(Metal fitting)
Material Finish
5
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
Part Number
GT8E-8DP-2H(70) 758-0028-4-70
PPS(Housing)
Brass(Contact)
Brass(Reinforced fitting)
Color:Black
Tin plated
Tin plated
400 pcs.
per reel
CL No. Material Finish Packaging
Note : Applicable housing is GT8E-8DS-2C.
Color:Black
Tin plated
Tin plated
PPS(Housing)
Brass(Contact)
Brass(Reinforced fitting)
Material Finish
(12.5)
(1.4)
9
20.7±0.15
24.9±0.15
P=2±0.15
14±0.15
22.13±0.2
1.4±0.15
0.1±0.1
7.6±0.3
4.5±0.15
9.5±0.15
11.1±0.15
13.65±0.3
GT8E -8DP-
2H (70)
GT8E-8DS-2C
■Right angle pin header (SMT)
●Full lock type (8 pos.)
14±0.05
22.13±0.05
2.465±0.05
3.45±0.05
4.77±0.05
4.3±0.05
2±0.05
0.9+0.1
0
0.9+0.1
0
Ø0.9
+0.1
0
7.4+0.1
0
3
+0.1
0
2
+0.1
0
■Recommended PCB
Mounting Pattern
■
Fully mated connector
assemblies
13.65±0.3
11.1±0.2
D
C
A
B
(12.5)
GT8E-2P-2 H (70)
GT8E-*S-HU
0.1±0.1
6.9±0.3
0.1±0.1
1.5±0.3
●Full lock type (2 pos.)
6-Ø1.2
+0.1
0
2±0.05
10.58±0.05
4.8±0.05
4.3±0.05
2+0.1
0
3+0.1
0
7.4+0.1
0
1.06
R1
+0.1
0
■Recommended PCB
Mounting Pattern
■
Fully mated connector assemblies
All dimensions: mm
Part Number
GT8E-2P-2H(70)
GT8E-3P-2H
GT8E-4P-2H
758-0032-1-70
758-0096-4
758-0079-5
2
3
4
13
13.7
14.4
9.15
9.85
10.55
2
4
6
10.58
11.28
11.98
2
4
6
10.58
11.28
11.98
400 pcs.
per reel
CL No.
Number
of
contacts
A
dimension Telerace
(±0.3)
B
dimension Telerace
(±0.3)
C
dimension Telerace
(±0.15)
D
dimension Telerace
(±0.2)
E
dimension Telerace
(±0.05)
F
dimension Telerace
(±0.05)
Packaging
Note : Applicable housing is GT8E-*S-HU.
6
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
Part Number
GT8E-8/2P-2H(70) 758-0031-9-70
PPS(Housing)
Brass(Contact)
Brass(Reinforced fitting)
Color:Black
Tin plated
Tin plated
500 pcs.
per reel
CL No. Material Finish Packaging
Note : Applicable housing is GT8E-2S-2C, GT8E-8S-2C.
Part Number
GT8E-8/5P-2H 758-0073-9
PPS(Housing)
Brass(Contact)
Brass(Reinforced fitting)
Color:Black
Tin plated
Tin plated
500 pcs.
per reel
CL No. Material Finish Packaging
Note : Applicable housing is GT8E-5S-HU, GT8E-8S-2C.
13.65
11.1
9.5
2±0.15
5.2±0.15
14±0.15
2±0.15
4.5±0.15
0.1
1.4±0.15
6±0.3
28.48±0.2
31.25±0.15
27.05±0.15
GT8E-2S-2C
GT8E-8S-2C
(1.4)
(12.5)
GT8E- 8/
2P-2H(70)
+0.15
-0.1
●Full lock type (8 / 2 pos.)
6-Ø1.2
+0.1
0
4.8±0.05
4.3±0.05
2.99±0.05 14±0.05
2±0.05
28.48±0.05
2±0.05
5.2±0.05
2
R1
+0.1
0
3+0.1
0
7.4+0.1
0
1.06 +0.1
0
■Recommended PCB
Mounting Pattern
■
Fully mated connector
assemblies
(12.5)
(1.4)
1.4±0.15
0.1
6±0.3
4.6±0.15
14±0.15
2±0.15
8±0.15
2±0.15
13.65±0.3
11.1±0.15
9.5±0.15
33.68±0.2
36.45±0.7
31.85±0.7
GT8E-8S-2C, GT8E-5S-HU
GT8E-8/5P-2H
+0.15
-0.1
●Full lock type (8 / 5 pos.)
6-Ø1.2
+0.1
0
4.3±0.05
4.8±0.05
3.39±0.05 14±0.05
33.68±0.05
8±0.05
2±0.05
2±0.05
4.6±0.05
R1
7.4+0.1
0
1.06+0.1
0
2+0.1
0
3+0.1
0
■Recommended PCB
Mounting Pattern
■
Fully mated connector
assemblies
Part Number
GT8E-2S-2C
GT8E-8S-2C
758-0030-6
758-0029-7 RBT Black 2
81
CL No. Material Color
Number of contact
7.1
16.6
A Packaging
Note 1 : Applicable terminal is GT8E-2022SCF, GT8B-2428SCF.
Note 2 : GT8E-2S-2C mates with GT8E-2P-2H(70), GT8E-8/2P-2H(70) or GT8E2P-DS.
GT8E-2S-2C mates with GT8E-8/2P-2H(70).
7.6±0.3
4.6±0.15
10±0.15A±0.15
●Full lock type
Socket
GT8E-*S-2C AWG #20~22
AWG #24~28
GT8E-2022SCF
GT8B-2428SCF
Applicable
Applicable conductor
7
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
Part Number
GT8E-8DS-2C 758-0027-1 RBT Black 8 1
CL No. Material Color
Number of contact
Packaging
Note 1 : Applicable terminal is GT8-2022CF, GT8-2428CF(70).
Note 2 : Applicable housing is GT8E-8DP-2H(70).
7.6±0.3
4.8
10±0.1518.75±0.2
■Socket
●Full lock type
Socket
GT8E-8DS-2C AWG #20~22
AWG #24~28
GT8-2022SCF
GT8-2428SC(F)
Applicable
Applicable conductor
All dimensions: mm
8
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
Part Number
GT8E-12DS-HU
GT8E-16DS-HU
GT8E-20DS-HU
GT8E-24DS-HU
758-0051-6
758-0064-8
758-0052-9
758-0054-4
RBT Black
12
16
20
24
1
CL No. Material Color
Number of contact
016.6±0.5
21.85±0.7
024.6±0.7
028.6±0.7
A Packaging
Note 1 : Applicable terminal is GT8E-2022SCF, GT8B-2428SCF.
Note 2 : Applicable housing is GT8E-*DP-DS.
A
B
5.8±0.3
2415
7.45±0.5
P=2±0.15
GT8E-24DS-HU PBT
14
*
1
10±0.5
10±0.5
●Full lock type (12 to 24 pos. / Double row)
14±0.15
18±0.15
22±0.15
26±0.15
B
Socket
GT8E-*DS-HU AWG #20~22
AWG #24~28
GT8E-2022SCF
GT8B-2428SCF
Applicable
Applicable conductor
7.6±0.5
A
C
B
P=2±0.15
GT8E-10S-HU PBT
110
*
4.6±0.3 10 ±0.5
●Full lock type (3 to 10 pos. / Single row)
Socket
GT8E-8S-HU AWG #20~22
AWG #24~28
GT8-2022SCF
GT8-2428SC(F)
Applicable
Applicable conductor
Part Number
GT8E-3S-HU
GT8E-4S-HU
GT8E-5S-HU
GT8E-6S-HU
GT8E-7S-HU
GT8E-8S-HU
GT8E-10S-HU
758-0061-0
758-0047-9
758-0062-2
758-0048-1
758-0063-5
758-0049-4
758-0050-3
RBT Black
3
4
5
6
7
8
10
1
CL No. Material Color
Number of contact
67.9±0.5
68.6±0.5
.612±0.5
12.6±0.5
15.6±0.5
16.6±0.5
20.6±0.7
A Packaging
Note 1 : Applicable terminal is GT8E-2022SCF, GT8-2428SCF.
Note 2 : Applicable housing is GT8E-*P-DS.
7.9±0.5
8.6±0.5
7.1±0.5
7.1±0.5
7.1±0.5
7.1±0.5
7.1±0.5
B
14±0.15
16±0.15
18±0.15
10±0.15
12±0.15
14±0.15
18±0.15
C
All dimensions: mm
All dimensions: mm
9
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
P=2±0.15
6±0.3
13.2±0.5
13.33±0.5 21.8±0.7
●Full lock in-line type (water proof)
A 21.8±0.7
(23.2)
(1.4)
GT8E-*S-HU
GT8E-*P-HU
P=2±0.1
B±0.15
6.9±0.5
■In-line type
●Full lock in-line type
Plug
GT8E-*P-HU AWG #20~22
AWG #24~28
GT8E-2022PCF
GT8E-2428PCF
Applicable
Applicable conductor
Plug
GT8EW-4P-HU AWG #20~22 GT8E-2022PCF
Applicable
Applicable conductor
Part Number
GT8E-3P-HU
GT8E-4P-HU
GT8E-8P-HU
758-0084-5
758-0082-0
758-0038-8
RBT Black
3
4
8
1
CL No. Material Color
Number of contact
10.55±0.5
10.55±0.5
18.55±0.7
A Packaging
Note 1 : Applicable terminal is GT8E-2022PCF, GT8-2428PCF.
Note 2 : Applicable housing is GT8E-*S-2C.
4
6
14
B
dimension Telerace
(±0.15)
Part Number
GT8EW-4P-HU 7758-0069-1 4 1
CL No. Number of contact Packaging
Note 1 : Applicable terminal is GT8E-2022PCF.
Note 2 : Use this in combination with GT8EW-4P-R, GT8EW-4P/S-BR, GT8EW-4P/S-BHS.
Note 3 : Applicable housing is GT8EW-4S-HU.
All dimensions: mm
10
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
P=2±0.15
6±0.3
16.5±0.5
13.33±0.5 18.7±0.7
●Full lock in-line socket (water proof)
Socket
GT8EW-4S-HU AWG #20~22 GT8-2022SCF
Applicable
Applicable conductor
Part Number
GT8EW-4S-HU 758-0068-9 4 1
CL No. Number of contact Packaging
Note 1 : Applicable terminal is GT8E-2022SCF.
Note 2 : Use this in combination with GT8EW-4P-R, GT8EW-4P/S-BR,
GT8EW-4P/S-BHS.
Note 3 : Applicable housing is GT8EW-4P-HU.
15.2±0.5
3.85±0.3
9±0.5
6±0.3
P=2±0.15
●Retainer (GT8EW-4P-HU)
Part Number
GT8EW-4P-R 758-0077-0 1
CL No. Packaging
Note 1 : Use this in combination with GT8EW-4P-HU.
9.13±0.5
1.52±0.3
11.45±0.5
●Retainer (GT8EW-4S-HU)
Part Number
GT8EW-4S-R 758-0076-7 1
CL No. Packaging
Note 1 : Use this in combination with GT8EW-4S-HU.
11
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
GT8EW-4P/S-BHS
GT8EW-4P/S-BR
GT8E-2022PCF
GT8EW-4P-R
GT8EW-4P-HU
GT8EW-4S-R
GT8E-2022SCF
GT8EW-4S-HU
GT8EW-4P/S-BHS
GT8EW-4P/S-BR
qCrimp the terminal and insert it into the in-line plug/socket. And mount the retainer.
wFitthepartstothein-lineplug/socketinfollowingorder:BushingandRetainer
■Full-lock in line waterproog connector use hand book
6±0.3
P=2±0.15
3.2±0.3
8.94±0.5
13.33±0.5
●Retainer (GT8EW-4P-HU, GT8EW-45-HU)
6±0.3
P=2±0.15
3.2±0.3
4.74±0.3
8.9±0.3
●Bushing (GT8EW-4P-HU, GT8EW-4S-HU)
Part Number
GT8EW-4P/S-BHS 758-0071-3 1
CL No. Packaging
Note 1 : Use this in combination with GT8EW-4P-HU,
GT8EW-4S-HU.
Part Number
GT8EW-4P/S-BR 758-0070-0 1
CL No. Packaging
Note 1 : Use this in combination with GT8EW-4P-HU,
GT8EW-4S-HU.
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
®
12
GT8E Series●2mm pitch, high reliability with lock, board to cable and cable to cable connector
■Crimping contact
●Crimping contact for socket
Part number
GT8-2428SCF(70)
GT8-2022SCF
GT8E-2022SCF
GT8B-2428SCF
GT8-2428SC(70)
Phosphor
bronze Tin plated
100pcs. per bag
10,000pcs.
perreel
GT8E-8DS-2C
GT8E-8DS-2C
GT8E-8DS-2C
GT8E-*S-2C,
GT8E-*S-HU,
GT8E-*DS-HU
GT8E-*S-2C
,
GT8E-*S-HU
,
GT8E-*DS-HU
Materials Finish Packaging Sockets
●Crimping contact for plug
●Automatic crimping machine
100
Time (s)
Temperature (ç)
150
200 180 30±10s
90±30s
230
250
●Hand tool
■Termination tools
User's manuals are available. Please contact a Hirose Electric account representative.
* : Crimp height setting tables are available for each cable type. please contact your nearest Hirose Electric account representative.
Different cables will requires different crimp height setting.
■Temperature Profile
Applicator product number
Part number CM-105
AP105-GT8-2428S
Part Number
HT102/GT8-2428S ---
CL No.
Solder method : Reflow, IR/hot air
Reflow cycles : 2 cycles
Peak temperature : 250℃
230℃min. : 20 sec. to 40 sec.
Pre-heat temperature : 150℃to 180℃
Pre-heat time : 60 sec. to 120 sec.
The photograph shows just one example.
The product is subject to change.
Part number
GT8E-2022PCF
GT8E-2428PCF
GT8E-2022PC
GT8E-2428PC
Copper alloy
Brass
Copper alloy
Brass
Tin plated
100pcs.
per bag
10,000pcs.
perreel
GT8E-8P-HU, GT8EW-4P-HU
GT8E-8P-HU
GT8E-8P-HU, GT8EW-4P-HU
GT8E-8P-HU
Materials Finish Packaging Plugs
Specifications
Item
Specification
Stroke length
Number of strokes
Wight
Motor
Crimping speed
1.5ton
30mm
200 spm(50Hz)
75kg
0.2kw
2,000 to 4,000 pieces/H
240spm(60Hz)
AC100V
Specification Remarks
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hirose Electric:
HT102/GT8-2428S AP105-GT8B-2428S AP105-GT8-2428S AP105-GT8E-2022P AP105-GT8E-2428P AP105-
GT8-2022S